Pyronix EURO 46 V10 User manual

EURO 46 V10
User Manual
RINS1943-1
Software Version >10
PD6662:2010+IA501:2015
EN50131-1:2008+A1:2009
EN50131-3:2009
Security Grade (SG) 3 - Large
Security Grade (SG) 2 - Small
Environmental Class (EC) II

2
EURO 46V10 User Manual
Contents
Introduction 5
HomeControl+ App 6
Setting Devices 7
Wired Keypads 7
Internal Tag Readers 7
External Tag Readers 7
Wireless Arming Stations 8
Setting the System 9
Using a PIN Code or a Tag 9
Un-setting the System 9
Using a PIN Code or a Tag 9
After an Alarm 10
Using a Proximity Reader 11
Setting and Un-setting the System 11
Entry Control 11
Anti-Code / Engineer Restore 12
Anti-Code Restore 12
Engineer Restore 12
Fault Indications / Unable to Set 13
Fault Indications 13
Unable to Set 13
Advanced Functions 13
Chime 13
Omitting an Input 13
Keypad Hold Up / Panic Alarm 14
Master Manager Menu 15
Menu Features Overview 15
Entering and Exiting Master Manager Menu 15
Menu Options 16
Set Date and Time 16
Operate User Outputs 17
Omit Inputs 17
Edit Users (Adding New Users) 17
Edit Users (Deleting and Changing Users) 19
Edit Users (Changing Master Manager Code) 19
Event Log 20
Set up App Data 21
Module Set Up 22
SMS Phonebook 23
WalkTest 23
SirenTest 24
Dial Out Menu 24
Allow Engineer Menu 24
Block UDL Set 24
Block UDL 25
System Sounds Demo 25
Using the HomeControl+ App 26
Adding a Panel to the App 26
Connecting to a Panel 26
Setting and Un-setting the System 27
Sensors, Controls and History 28
Notifications 28
The Main User Interface 29

3
EURO 46V10 User Manual
Engineer Contact Details andTables 30
Engineer Information 30
Certification 30
InputTable 32
Input Notes 34
UsersTable 35
User Notes 37
HomeControl+ App Icons 38
Disclaimer 39

4
EURO 46V10 User Manual

5
EURO 46V10 User Manual
Introduction
This alarm system has been designed with your security in mind; with quick and easy installation and
minimal maintenance, this system protects your home or property with a multitude of unique features.
As well as wired, this system can take full advantage of innovative two way wireless technology,
with the the wireless devices on this system constantly communicating with each other using High
Security Wireless Encryption Protocol.
Compared to conventional one way wireless systems, where devices can be ‘asleep’ for up to five
minutes at a time, therefore compromising your security, this wireless technology ensures your safety
at your home or office at any time.
This alarm system has been engineered to be secure, reliable and easy to use. It includes the
following features:
Battery Supervision
Advanced technology preserves the battery life of each wireless device. However, the system informs
you when a battery needs replacing upto a month in advance before the device stops working. This
key feature gives you enough time to change the battery in the specific device. Conventional wireless
alarm systems may not give you a low battery warning signal, meaning that devices could stop
working, leaving your environment unprotected.
User Automation Outputs
These give you the option to operate up to 20 devices such as gates, lights, garden sprinklers, etc.
via your keypad or remotely via your key fob, extending the use of your security system.
User Notification
Receive notice via SMS text message or push notification of any incidents within your home in real
time. This can be programmed to send in different situations such as:
• System is set or unset: Notification that your child has returned home from school safely.
• Alarm activation: Notification that the alarm has been triggered, allowing you to monitor your home
from anywhere in the world.
This alarm system has 6 areas which may be set up in the following way:
Area A: Full set of the house
Area B: Downstairs set. Upstairs unset.
Area C: Garage set. Rest of house unset.
Your engineer will be able to design the system according to your needs.

6
EURO 46V10 User Manual
AES-256
Encryption
Set and unset your system
View your system status in real time, including: alarm, CO and
smoke detectors
Customise and receive push notifications from your system
Have instant access to your events and history log
Control appliances such as lights, garage doors, gates and
blinds
All using an encrypted, highly secure system, for extra peace
of mind that your family and home is safe and secure
Connect to your home from anywhere in
the world
HomeControl+ App
100%9:41 AM
10:09

7
EURO 46V10 User Manual
Setting Devices
Wired Keypads
Internal Tag Readers
External Tag Readers
Additional wired keypads may also be connected to the alarm
panel, please ask your engineer for more information.
a= Exits the Master Manager Menu and selects Area A
when setting.
b= Moves backwards in the Master Manager Menu and
selects Area B when setting.
c= Enables chime, displays additional information in
the event log, and selects Area C when setting.
d= Moves forward in the log, scrolls between options
and enters the Master Manager Menu and selects Area D
when setting.
pf= Not used.
[]= Directional buttons and enables/disables functions.
I= Selects commands.
A= Cancels items, resets the panel and moves to next item
in a menu item.
Euro 46
Time 10:09 c
The internal tag reader can be used for setting/un-setting, entry control or access control.
Ask your engineer for more details.
The external tag reader can be used for setting/un-setting, entry control or access control.
Ask your engineer for more details.
Proximity area (please present your tag here)
:Alert LED
;Alarm LED
<Tamper LED
=Fault LED
>Unset LED
To set/unset the system using the external tag reader,
present a pre-programmed tag to the centre of the device.
The device will display the system status:
Green = Unset
Red = Set
Present the tag again within 10 seconds and the system
will set or unset.
The system will then set depending on the type of exit
mode programmed (Final Door, Timed or Push to set),

8
EURO 46V10 User Manual
Wireless Arming Stations
If you are using a tag to set / unset the intruder
system, press any key first (except d), to ‘wake’
the wireless arming station before presenting a tag.
Alternatively, if a user code is being used, please
enter the code. The wireless arming station will
automatically ‘wake’ once the first button is pressed.
After a tag or code has been accepted, choose the
area to set by pressing the a, b, cor d
keys. The key will illuminate indicating
that area has been chosen to be set. Once
confirmed, press the tkey.
To unset, simply enter the user code.
OP 1 OP 2 OP 3OP 4
OP 1 OP 2 OP 3OP 4
Press the dkey and enter the Master
Manager Code.
The keys 1 2 3 and 4will illuminate.
The OP1 – OP4 LEDs will illuminate once the 1-4 numeric
keys have been pressed. Once illuminated, it signifies that
the output has triggered. Press the key again to deactivate
the output.
For information on how these may have been programmed,
please speak to your engineer.
Setting and Un-setting
Activating the Outputs
OP 1 OP 2 OP 3OP 4
Check out our wireless range at www.pyronix.co.uk

9
EURO 46V10 User Manual
Setting the System
Un-setting the System
Using a PIN Code or a Tag
Using a PIN Code or a Tag
Enter a valid PIN code or present a valid tag to the ‘tag
symbol’ (which is to the left of the LCD screen).
Enter the area you wish to set, and press f. ‘Please
wait setting wireless’ will be displayed.
There are three different setting methods, your engineer
will demonstrate the appropriate exit method for your
installation:
Final Door: Once the exit time has started, leave the
building and make sure the exit door is opened and
then closed properly.
Timed: Make sure you leave the building before the
timer shown on the keypad expires.
Push to set: Press the push to set button installed by
your engineer to set the system.
Enter the building and the ‘entry time’ will start.
Enter a valid PIN code or present a valid tag to the ‘tag
symbol’ (which is to the left of the LCD screen).
Level Set System
Press fand the area that the code is assigned to will
be unset.
Area Set System
Select the area or areas you wish to unset then press
f.
PLEASE NOTE: If ‘flexi-unset’ is disabled then the
system will automatically unset the levels or areas set,
once a valid user code or tag is presented.
Enter Your Code
[*******]
ENTRY TIME [30]
Set Areas?
[A ]
Enter Your Code
[*******]
Please Exit via
Exit Route
EURO 46
Time 10:09 c

10
EURO 46V10 User Manual
Enter Your Code
[*******]
After an Alarm
Enter a valid PIN code or present a valid tag to the ‘tag
symbol’ (which is to the left of the LCD screen).
The alarm symbol will flash indicating there has been an
alarm activation and the keypad will display which input
has activated.
Press hto reset the system.
Alarm silenced
Pantry
EURO 46
Time 10:09 c

11
EURO 46V10 User Manual
Setting and Un-setting the System
Entry Control
Using a Proximity Reader
There are two types of readers that can be used with the alarm system - the internal tag reader (used
for indoors only) and the external tag reader (used for both indoors and outdoors).
Tags for the readers need to be programmed through the ‘Edit Users’ function in the Master Manager
menu. The internal and external readers can be both assigned to individual areas, this will need to be
set up by your engineer.
Unset Set Unset Set
Unlocked Locked Unlocked Locked
The readers may be used for entry control, which means they can operate automatic locks for
example, as well as setting and un-setting the system. This can be set up by your engineer.
Entry Control Instructions
Arming: Present a valid tag to the reader, the GREEN LED will illuminate on the external reader,
remove the tag, the door will unlock, then present the same tag within 10 seconds and the system will
set and the door will lock.
Disarming: Present a valid tag to the reader and then remove it, the status will be shown (the alarm
symbol will illuminate indicating the system is armed on the internal reader and the RED LED on the
external reader), present the same tag within 10 seconds again and the system will be disarmed, and
the door will unlock. Once disarmed, the door can be unlocked.
Access Control/Entry Control: The readers can be used also for opening doors only without the ability
to set and unset. Please contact your engineer for more information on this feature.
PLEASE NOTE: Both the internal and external tag readers use the same proximity tags that are used
to set and unset on the keypad of the system.

12
EURO 46V10 User Manual
Anti-Code / Engineer Restore
Anti-Code Restore
Engineer Restore
Your engineer may have set up the system so that either an ‘Anti-Code’ or ‘Engineer Restore’
is required in order to fully reset the alarm system. What this means is that there will be certain
conditions (specified by your engineer in the programming) that will require more than just your user
code/tag to restore the system back to its normal state.
PLEASE NOTE: Your code will still silence the alarm, but it will not reset the system.
Alarm Silenced
Restore G76491
Engineer Reset
Performed
Restore
Required
After alarm activation has occurred, enter a valid PIN
code, present a valid tag, or press  on the key fob to
silence the alarm.
The keypad will display as shown to the right. It is
essential to take note of the number, on the screen
(including the ‘G’) and call your Alarm Receiving
Centre (ARC).
Press h.
PLEASE NOTE: If your alarm system is not monitored
by an ARC, you will need to contact your engineer.
Upon calling the ARC, quote the full code displayed
(including the ‘G’) to the ARC. They will respond with
the anti-code for your system.
Make sure that the time is displayed on the LCD
and enter the anti-code given by the ARC. ‘Engineer
Reset Performed’ will be displayed on the screen if
entered correctly, press hto return to the time. If
this procedure does not work correctly, contact your
engineer.
Alternatively, the engineer may have just enabled ‘Engineer Restores’ and not anti-code. In this
instance the keypad will just display ‘Restore Required’. In this scenario, please contact your
installation company and explain the situation.
EURO 46
Time 10:09 c

13
EURO 46V10 User Manual
Fault Indications / Unable to Set
Fault Indications
Chime
Omitting an Input
Unable to Set
Any faults that occur on the system will be easily recognised by the flashing ALERT LED.
To see what the fault is, enter a valid PIN code, present a valid tag, or press on the key fob.
Depending on how the system has been set up by your engineer, it may still be possible to set the
system despite a fault being present. To do this, enter your PIN code or present a tag, select the area
then press f.
PLEASE NOTE: Any fault may affect the overall performance of your alarm control panel and
therefore your engineer should be contacted for further assistance if any fault is active.
Unable To Set
Pantry Door
If ‘Unable To Set’ is displayed, it indicates that an
input is open and the area where the input is should
be checked for open windows, pets, movement etc.
If the problem cannot be solved contact your
engineer, or omit the input.
Advanced Functions
EURO 46
Time 10:09 c
The ‘chime’ can be used for any input on the system
and can be set up by your engineer.
To enable the chime on the keypad, when the time is
displayed, press cand ‘c’ will be displayed on the
right side of the keypad display.
Press cagain to disable the chime feature.
Omit Day Al [01]
On occasion, a detector may need to be isolated if a
room is occupied. Enter your user code and press f
Once the exit time starts, press fthen select the
inputs that need to be omitted. Press a. After 10
seconds the exit time continues.
PLEASE NOTE: Inputs have to be programmed as
‘omittable’ by your engineer for this feature to operate.

14
EURO 46V10 User Manual
Keypad Hold Up / Panic Alarm
EURO 46
Time 10:09 c
If a ‘Hold Up’ is needed, press and hold both 1and
7(the length of time they need to be pressed is
programmed by your engineer).
A ‘Hold Up’ alarm will be generated.
PLEASE NOTE: The ‘Hold Up’ facility needs to be
enabled by your engineer (either silent or full alarm).

15
EURO 46V10 User Manual
Menu Features Overview
Master Manager Menu
The Master Manager Menu has the following functions:
PLEASE NOTE: The options visible will depend on which modem is installed in the panel.
Function Description
SET DATE AND TIME Programs the date and time.
OPERATE USER OUTPUTS Activates/deactivates user automation outputs that are used to remotely activate devices, such as
electronic gates & lights.
OMIT INPUTS Omits any ‘24 hour’ inputs only (except ‘Hold Up’ inputs).
EDIT USERS Adds/Edits/Deletes User PIN codes, tags and key fobs.
REVIEW LOGS Displays all event log information.
SMS PHONEBOOK If SMS text is enabled, there will be up to 10 mobile numbers that can be programmed to send
SMS alarms. Please discuss this feature with your engineer if required (THIRD PARTY SIM CARDS
ONLY).
SET UP APP DATA If the HomeControl+ App has been enabled, this function will control the settings.
MODULE SETUP This option will change depending on which modem is installed in the system. It could display:
‘WI FI SETUP’, ‘GPRS SETUP’ or ‘LAN SETUP.’
WALK TEST Tests each input.
SIREN TEST Tests each external sounder (wired or wireless).
DIAL OUT MENU Calls the UDL software.
ALLOW ENGINEER MENU Enables or Disables engineer access.
BLOCK UDL SET Blocks remote setting from the PC software.
BLOCK UDL Blocks uploading/downloading from the PC software.
SYSTEM SOUNDS DEMO Demonstrates all the sounds of the alarm system.
EXIT MANAGER MODE Exits the Master Manager Menu.
PLEASE NOTE: The Master Manager code allows access to all the options above. A ‘user code’
has access to the ‘User Menu’ which includes the functions: ‘OPERATE USER OUTPUTS’, ‘CHANGE
CODE’, ‘REVIEW LOGS’, ‘WALK TEST’, ‘SIREN TEST’, ‘ALLOW ENGINEER MENU’, and ‘EXIT USER
MENU’.
Enter Your Code
[ ]
EXIT MASTER
MENU?
Entering and Exiting Master Manager Menu
Press d.
Enter the Master Manager Code or present the Master
Manager Tag.
Press bor hto scroll through the different
functions mentioned above.
Press bor hkeys to scroll through until ‘EXIT
MANAGER MODE’ is displayed. Press f.
Or to exit the menu, when a main item is displayed
(capital letters) press a.

16
EURO 46V10 User Manual
SET DATE & TIME?
Year (00-99)
[07]
Month (1-12)
[01]
Day (1-31)
[01]
Hours (0-23)
[10]
Minutes (0-59)
[09]
DST adjust?
No [0]
Menu Options
Set Date and Time
Press bor hto scroll to ‘SET DATE & TIME’.
Press f.
Enter the Year.
Press f.
Enter the Month.
Press f.
Enter the Day.
Press f.
Enter the Hours.
Press f.
Enter the Minutes.
Press f.
DST (Daylight Saving Time) adjust.
Use band dto select then press f.

17
EURO 46V10 User Manual
OPERATE USER
OUTPUTS?
Select Output
[01]
Output Off
Operate User Outputs
Omit Inputs
Edit Users (Adding New Users)
Use bor hto scroll to ‘OPERATE
USER OUTPUTS’. Press f.
Select the output to be operated by using the b
and dkeys and press f.
PLEASE NOTE: The output to be operated can also
be entered using the numerical keys.
Press ftrigger output on and off.
Press hto exit.
Repeat if necessary.
Press bor hto scroll to ‘OMIT INPUTS’. Press
f.
Enter the inputs you require to be omitted for the
next setting procedure. Press f.
PLEASE NOTE: All inputs will be only omitted for the
next setting procedure.
OMIT INPUTS?
EDIT USERS?
Omit Day Al [01]
Add New User?
The ‘EDIT USERS’ function allows adding, editing and deleting of user codes, tags and key fobs. The
Master Manager Code can also be changed. The control panel can have up to 75 users.
PLEASE NOTE: Any proximity tags that are to be used on a standalone tag reader must have
flexi-set set to ‘No’.
Press bor hto scroll to ‘EDIT USERS?’. Press
f.
To add a new code or tag press f.
Press hto delete or change a user code (see the
next section for details).

18
EURO 46V10 User Manual
Empty [01]
User Type
User [0]
User Set Options
Unset / Set [0]
Enter User Code
[******]
User Areas
[01ABCD]
Flexi Set
No [0]
User Name
_
Press bor dto choose a user number. Press f.
Enter the new code or present a tag. Once ‘asterisks’
appear, the tag or user code will be now assigned to
this user. Press f.
Press bor dto choose between ‘User’ or
‘Manager’ Press f
PLEASE NOTE: This screen will not be displayed if you
have programmed a wireless key fob.
Select the areas that the user will be assigned to: 0,1,
A, B, C or D. Press f.
Press bor dto choose between ‘Unset/Set’,
‘Unset Only’, ‘Set Only’ or ‘None’. Press f.
PLEASE NOTE: This screen will not be displayed if you
have programmed a wireless key fob.
Press bor dto enable or disable ‘Flexi-Set’. Press
f.
PLEASE NOTE: This screen will not be displayed if you
have programmed a wireless key fob).
Enter the user name and press f.
Repeat to add more users.
PLEASE NOTE: For instructions on adding a key fob please refer to the manual provided with the
product.

19
EURO 46V10 User Manual
Delete/Change
User?
Delete User?
Change Master
Manager Code?
Tag [01]
Daniel
Change User?
Edit Users (Deleting and Changing Users)
Press fto delete or change a user or press hto
edit the Master Manager Code. (See the next section
for details).
Press bor dto scroll through the users, or enter
the user number and press f.
Press fto delete a user, or press h
to change a user.
Press fto change the user. Follow the steps on
‘Adding a New User’ for the options presented.
Edit Users (Changing Master Manager Code)
To edit the Master Manager Code, press f.
Enter the new code or present a tag. Press f.
Refer to the section ‘Adding New Users’ for the options
which will follow the code change.

20
EURO 46V10 User Manual
Event Log
Panel Log?
REVIEW LOGS?
01/01 10:09:26
User Added
Daniel
Press bor dto scroll to ‘REVIEW LOGS’. Press
f.
Press f.
The most recent event will be displayed, press bor
dto scroll backwards and forwards through the log.
Press the ckey on any log entry to show more
information (such as which input activated, or which
user set the system etc.).
The ‘Review Logs’ function monitors all operational information of the alarm system, such as setting/
un-setting information and alarm activations etc.