Pyronix Enforcer Setup guide

How to Set your Pyronix Enforcer Alarm System
From Main Control Panel:
Ensure your front door is shut before setting your alarm.
Enter your 4 Digit Code or Present your Prox tag to tag reader.
Setting ‘A’ will light up RED
if using Prox tag, system will start to set the ‘A’ setting straight away.
Display will say ‘Please wait setting wireless’
Once the Timer starts you can then exit the door, you have 20-30 seconds to so.
Once you shut the door the Alarm will set after 5 seconds.
Unsetting your Pyronix Enforcer Alarm
When you open the front door the Alarm will start to beep with a 20-30 second
countdown.Either enter your 4 digit code or present your Prox Tag.

How to use your Remote Keyfob
Panic Function.
Press and hold buttons I & II together for 3 seconds. This will set the alarm off internally and
externally.
Press the unlock button to turn off. You will need to go to the main panel and press YES to
clear down and reset the alarm panel after.
Chime feature