Q-See QSD6204C4-250 Operating and maintenance instructions

Q
QU UI IC CK K I IN NS ST TA AL LL LA AT TI IO ON N G GU UI ID DE E F FO OR R M MP PE EG G4 4 D DV VR R 4 4 C CH H M MO OD DE EL L Q QS SD D6 62 20 04 4C C4 4- -2 25 50 0
Part 1- Package contents:
Part 2 – DVR Camera and Power Connections

Part 3 – Connecting the DVR to your TV
Part 4 – DVR Controls: Front Panel

Part 5 – Accessing the DVR menus
Part 6 – Setting up Cameras for Viewing and Recording

Part 7 – To Start Recording
There are 3 modes for recording, Manual, Motion/Sensor Detection, Scheduled:
1. Manual recording:
If you push the RECORD button the DVR will start recording. To stop recording push the Stop button.
2. Motion Detection and Scheduled Recording:

Part 8 – Setting up the DVR to Playback
Part 9 – Backing up the Video on the DVR to
You can back up the video that is on the DVR to your PC through a USB 2.0 port using the PC Viewer software
That comes with the DVR. Refer the manual for instructions on how to use the program to back up video.

If you have questions:
Contact Us:
Mailing Address: Customer Service:
DPS Inc. Phone: [phone] x 5 8
8015 E. Crystal Dr Email: [e-mail]
Anaheim, CA 92807
Website: Tech Support:
http://www.q-see.com Phone: [phone] x 5 9
Fax: Email: [e-mail]
714-998- 509