QOLSYS IQ Siren User manual

IQ SIREN QUICK INSTALL GUIDE
Built-in Lithium Battery: 430 mAh
Alarm Power: 1.7W
Max Standby Power: 0.7W
Max Volume: 105dB
Operating Temperature: 0°C to 40°C
Operating Distance: Up to 550 feet outdoors
Frequency Type : Z-Wave Plus
SPECIFICATIONS
The IQ Siren is a wireless Z-Wave device that allows you to have additional sirens
placed throughout the home.
It plugs into any standard outlet, acts as a repeater in the Z-Wave network, has a
rechargeable back up battery and three LED lights that strobe when the siren is
triggered.
Mounting Locations:
•Kitchen
•Living Room
•Basement
•Bedrooms
•Garage
Pair up to 3 IQ Sirens with the IQ Panel.
FEATURES & OVERVIEW
This is a quick guide for experienced installers only. Refer to http://dealers.qolsys.com (login required)

STEP
2
DETERMINE
INSTALLATION
LOCATION
PREPARE THE IQ PANEL TO
ENROLL THE IQ SIREN
STEP
3
PAIRING WITH
THE IQ PANEL
✓
Test device to ensure
proper function
Document#: IQSIREN-QG-03-17
Revision#: 03/27/17
Issue Date: MAR 2017
Qolsys Product #: QZ2300-840
Press the button on
the bottom of the IQ
Siren once to enroll
with the IQ Panel.
(LED will flash)
STEP
1
Plug in the IQ Siren
at desired location
Customize name
Complete pairing process
by touching Add
Place your panel in
“autolearn" mode
Tech[email protected]om
Qolsys Inc. proprietary.
Reproduction without permission is not permitted.
FCC ID: XBAZW080
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas provoquer d'interférences et (2) cet appareil doit accepter toute
interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil.
CONTACT TECH SUPPORT
GOT QUESTIONS?