Quantum sphere Qmw101 User manual

M6x25mm

M4x12mm 2

M8x16&M8X36 4+4

M8x25mm 4

4+4

Installation

guide

QMW101

Accessory list

Attention: The drawings below are only for reference and might be slightly

different from the actual object. For any tools missing or installation

problems, please contact customer service.

90kg

1080-1820mm

32"-86"

Maximum load capacity

Height Range

Suitable TV Sizes

Technical data

No. Image Spec Qty

Rectangular Washer

Magnetic Level

Washer

Spacer

Component list

1. Product: Motorised Trolley / Media Wall (x1)

2. Top cover (x1)

3. Storage box (x2)

4. TV bracket (x1)

5. TV bracket arms (x2)

6. Rotary Knob (x2)

STEP 1 Remove the corner guards on both

sides of the foot of packaging.

Figure A

Figure B

STEP 2 Open up the legs

Open up the legs according to the directions shown on the picture, and when you hear

"click" the foot setting is ﬁnished.

STEP 3 Remove top metal plate and then install top covers

Use a screwdriver to remove the corners on both sides of the product.

The removed parts are no longer required.

Click Click

Install top shield plate with rotary knob.

Screw Driver

Put the product up side down. Remove the corner guards on both sides of

the bottom foot of the product with a screwdriver (ﬁgure A) . Then install the

screw on the bottom foot on the threaded hole of sheet metal (ﬁgure B).

EB/C

Ax2

STEP 4

Remove ofﬁce plug and

install storage box.

Firstly, install the storage box on the

axle, then press it down slightly.

First attach the thumb

screw (A) to the

threaded hole of the

plug and then pull it

together.

Control Panel

After connecting the product's power plug to an external power source, raise the product to the

appropriate height with the control panel. Then remove the four holes on the front panel by

hand-tightening the screws (A). Remove the storage box from the package and secure it to the

left and right sides of the product through the reserved hanging shaft as shown.

STEP 5 Install TV bracket

Attention: If you do not need to install the TV, please

ignore next steps.

Use a screwdriver to attach the screws(D), washers(G), spacers(H) and TV

bracket to the threaded holes on the front panel of the product. Use the

magnetic level(F) to calibrate whether the TV bracket is installed level.

Screwdriver

STEP 6 Connect the TV to the TV bracket arms

Used for M8 screw

Television

Used for M6 screw

Use a screwdriver to attach the screws(B) or screws(C), rectangular washer(E), TV

bracket arms and spacers(H) to the TV

Rectangular washer(E)

Television

Connecting cables

STEP 7

Insert the power cord of the TV into the threading sleeve

Hanging the TV

STEP 8

Install the TV on the TV bracket and tighten the screws with a screwdriver,

then plug the TV's power cord into the power strip inside the product.

Power outlet

(located on the inside

of the product)

Screw

Power cord

Threading sleeve

Common fault treatment

The following tips will help you detect and ﬁx common errors made when using the product. If you need further assistance, please contact your supplier.

Fault phenomenon Method

No response after pressing the

down arrow while connected to a

power supply for a long period of

time.

1.Check if all the cables are connected ﬁrmly

2.Contact your supplier or dealer

No response while pressing up

arrow/ down arrow after

connected with a power supply

Rises in a low speed

1.Check if overloaded, max loading: 90kg;

2.Contact your supplier or dealer

The motor does not move as instructed 1. Contact your supplier or dealer

1.Reposition

2.Contact your supplier or dealer

Goes down but not up

Slides downwards

Frequently re-positions

Overwork

（Duty cycle:Max 2min on/18min OFF）

1.Restart after suspend for 18mins while

connecting with power;

2.Contact your supplier or dealer;

Gx4

Hx4

Magnetic

Level

Magnetic Level

Bx4 Cx4 Ex4 Hx4

Attention

1. Power supply: AC100V-240V,50/60Hz

2. Service Environment: 0-40°C

3. Unplug the power plug before cleaning, wipe the dust off surface with slightly wet dishcloth, be careful not to let the drops into internal parts, don't lose the connector.

4. The electric box contains electronic components, metals, plastics, wires etc., so dispose of it in accordance with each country's environmental legislation, not the

general household waste.

5. Check carefully to ensure correct and complete assembly before using.

6. Be familiar with all functions and program settings of the product before ﬁrst use.

7. Children are forbidden to play on the product due to possible injury.

8. Slight noise caused by the V-ribbed belt or brake system due to structure will not have any effect on the use of the equipment.

9. Corrosive or abrasive materials are forbidden to clean the equipment. Must ensure that the cleaner used will not pollute the environment.

10. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play

with the appliance.

11. Cleaning and user maintenance shall not be made by children without supervision.

12. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly

qualiﬁed person in order to avoid a hazard.

13. Please make sure there is no hazard sources in your operating environment e.g. do not litter tools. Always be careful to treat the packaging materials with care in

order to avoid any possible danger e.g. plastic bag may lead to choking hazard for children.

14. Keep the original package of the equipment if necessary in case of the future use in transportation.

15. Make sure you have read the instructions before installation and fully understand how to install them. If you do not understand any of the installation steps, please

contact the professional installer.

16. Keep the original package of the equipment if necessary for future use in transportation.

17. Please check the connecting parts every two months to check if the screws are loose.

18. Before installation, please make sure to check the load capacity. Never exceed the maximum load of 100Kg (the weight of the TV bracket does not exceed 100Kg),

otherwise it will cause damage to the product or personal injury.

19. Note: These products are for indoor use only. If used outdoors, it may cause damage to the product or personal injury.

Waste disposal

This marking indicates that this product should not be disposed with other household wastes. To prevent

possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly

to promote the sustainable reuse of material resources. To return your used device, please use the return

and collection systems or contact the retailer where the product was purchased. They can take this product

for environmental safe recycling.