Quoizel BERK8409MB User manual

- of 2 -1
INSTALLATION GUIDE FOR BERK8409MB
CARE AND MAINTENANCE
SAFETY INFORMATION Released Date: 2021-08-25
• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage
the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am - 5:00pm EST), or visit us on-line at
www.quoizel.com.
Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING
• RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
• RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).
TOOLS REQUIRED
PACKAGE CONTENTS
MOUNTING HARDWARE
AA Inner Backplate
x 1 BB Mounting Screw x2 CC Wire Connector x 3 DD Outlet Box Screw x2
AFixture Body
x 1 BNarrow Glass Panel
x2
CWide Glass
Panel
x1
DFixture Hood
x1
E
Lock Screw
(preassembled on
Fixture Body)
x6
D
Tab
(preassembled on
Fixture Body)
x4

- of 2 -2
INSTALLATION
1
Install Glass Panels
Your installation is now complete! Restore electricity and save this sheet for future reference.
4
Install Inner Backplate
7
Apply Caulking
ECxterior aulk
* Note: Do NOT caulk the bottom of the backplate to
allow moisture to escape.
2
Install Bulbs
Install two correct bulbs referring
to fixture markings and/or labels
for maximum wattage.
Recommended Bulb Type (not
included):
3
Install Fixture Hood
5
Wiring
White wire from supply White from fixture
Black (or red) wire from supply Black from fixture
Ground wire from supply
Ground wire
from fixture
Green ground screw
6
Install Fixture Body
ECxterior aulk
ECxterior aulk
BULB BASE TYPE
Candelabra (E12)
BULB SHAPE
TYPE B
60W