Quoizel WVR9806EK User manual

- of 2 -1
Fixture Body
x1
A
PACKAGE CONTENTS
Released Date: 2021-10-09
CARE AND MAINTENANCE
SAFETY INFORMATION
Glass Panel
x4
B
INSTALLATION GUIDE FOR
WVR9806EK, WVR9806SS, WVR9807EK and WVR9807SS
• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage
the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am - 5:00pm EST), or visit us on-line at
www.quoizel.com.
READ ALL INSTRUCTIONS BEFORE INSTALLATION
Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING
• WARNING: When using outdoor use portable luminaries, basic safety precautions should always be followed to reduce the risk of fire,
electric shock, and personal injury, including the following:
1) Use only three-wire outdoor extension cords that have three-prong grounding plugs and grounding receptacles that accept the
appliance’s plug.
2) Ground Fault Circuit Interrupter (GFCI) protection is to be provided on the circuit(s) or outlet(s) to be used for the wet location
portable luminaries. Receptacles are available having built-in GFCI protection and are able to be used for this measure of safety.
3) Use only with an extension cord for outdoor use, such as an extension cord of cord type SEW, SEOW, SEOOW, SOW, SOOW, STW,
STOW, STOOW, SJEW, SJEOW, SJEOOW, SJW, SJOW, SJOOW, SJTW, SJTOW, or SJTOOW.
• RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
• RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).
TOOLS REQUIRED

- of 2 -2
INSTALLATION
5
Install the Bar
Your installation is now complete!
Insert the plug onto the wall outlet and push the switch to light your fixture on/off.
Save this instruction sheet for future reference.
6
Install the Fixture Hood
Switch
Cord
Install the correct bulb referring to fixture
markings and/or labels for maximum wattage.
4
Install Bulb
Recommended Bulb Type
(not included):
BULB BASE TYPE
Medium (E26)
BULB TYPE
TYPE A
100W
MAX
1
Remove the Hood from Fixture Body
2
Remove the Bar
3
Install Glass Panels
* Bevel side is outside.
Slot
Tab
Plug