Quoizel NAO1507EK User manual

- of 2 -1
CLock Rod
x3
INSTALLATION GUIDE FOR NAO1507EK
CARE AND MAINTENANCE
SAFETY INFORMATION Released Date: 2021-08-12
• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage
the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am - 5:00pm EST), or visit us on-line at
www.quoizel.com.
Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING
• RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
• RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).
TOOLS REQUIRED
PACKAGE CONTENTS
Crossbar Assembly
x1
AA Wire Connector
x3
BB Outlet Box Screw
x2
CC
ACeiling Canopy
x 1
MOUNTING HARDWARE
BFixture Body
x1
DGlass Shade
x1

- of 2 -2
INSTALLATION
Your installation is now complete! Restore
electricity and save this sheet for future reference.
1
Adjust Cord Length:
Fixture Height Adjustable ” to ”13 103
Safety Clip
Cord
Set Screw
Unlock set screw on the cord relief and slide the
safety clip to adjust the cord length according to
desired hanging height. Always tighten the set screw
after adjustment.
Cord Relief
4
Install Ceiling Canopy
2
Install Crossbar Assembly
Outlet Box
3
Wiring
Ground wire from supply
Black (or red) wire from supply
White wire from supply
Ground wire
from fixture
Black wire from fixture
White wire from fixture
Green ground screw
5
Install Glass Shade
6
Install Bulb
Install the correct bulb referring to
fixture markings and/or labels for
maximum wattage.
Recommended Bulb Type
(included):
BULB BASE TYPE
Medium (E26)
BULB TYPE
TYPE A
100W
MAX