Rae MiniRAE Lite User manual

MiniRAE Lite
User’s Guide
Rev. C
July 2010
P/N 059-4022-001

© Copyright 2009 RAE Systems, Inc.

MiniRAE Lite User’s Guide
Contents
1Standard Contents......................................................................8
2General Information................................................................... 8
3Physical Description .................................................................. 9
4Specifications.............................................................................9
5Replacing Alkaline Batteries ...................................................12
6Charging A Lithium Ion Battery.............................................. 14
7Charging A Spare Rechargeable Battery
(Optional Charger Stand Only)................................................15
Low Voltage Warning.................................................................. 16
Clock Battery ...............................................................................16
8User Interface .......................................................................... 17
9Display.....................................................................................19
10 Operating The Instrument........................................................20
11 Turning The Instrument On.....................................................20
12 Turning The Instrument Off ....................................................21
13 Operating The Built-In Flashlight ...........................................21
14 Pump Status .............................................................................21
15 Calibration Status .................................................................... 22
16 Basic Operation ....................................................................... 23
17 Alarm Signals ..........................................................................24
18 Preset Alarm Limits & Calibration..........................................25
19 Testing The Alarm...................................................................25
20 Integrated Sampling Pump ......................................................25
21 Backlight..................................................................................26
22 Standard Accessories...............................................................26
23 Standard Kit & Accessories.....................................................26
Alkaline Battery Adapter ............................................................. 26
To insert batteries into the adapter:..............................................26
24 External Filter..........................................................................27
25 Optional Accessories ...............................................................27
Calibration Adapter...................................................................... 27
Calibration Regulator................................................................... 28
Organic Vapor Zeroing Kit..........................................................28
Travel Charger .............................................................................28
26 Standard Two-Point Calibration (Zero & Span).....................30
Entering Calibration.....................................................................30
Entering Calibration.....................................................................31
Zero (Fresh Air) Calibration ........................................................32
1

MiniRAE Lite User’s Guide
Span Calibration...........................................................................34
Exiting Two-Point Calibration..................................................... 36
27 Programming Mode.................................................................36
Entering Programming Mode.......................................................36
28 Programming Mode Menus ..................................................... 38
Zero Calibration .............................................................................38
High Alarm ..................................................................................38
Date.............................................................................................. 38
Span Calibration.............................................................................38
Low Alarm...................................................................................38
Time .............................................................................................38
Alarm Type ..................................................................................38
Language......................................................................................38
Buzzer & Light ............................................................................ 38
Power On Zero.............................................................................38
LCD Contrast...............................................................................38
Exiting Programming Mode......................................................... 39
Navigating Programming Mode Menus....................................... 39
29 Key Function in Programming Mode......................................39
Calibration....................................................................................40
Zero Calibration....................................................................... 40
Span Calibration ......................................................................40
Alarm Setting ............................................................................... 41
High Alarm.............................................................................. 42
Low Alarm...............................................................................42
Alarm Type..............................................................................43
Buzzer & Light ........................................................................ 45
Date.......................................................................................... 45
Time......................................................................................... 46
Language .................................................................................46
Power On Zero.........................................................................47
LCD Contrast...........................................................................47
Diagnostic Mode..........................................................................48
Entering Diagnostic Mode....................................................... 48
Adjusting The Pump Stall Threshold ......................................49
Pump High............................................................................... 49
Pump Low................................................................................49
Exiting Diagnostic Mode......................................................... 50
30 Updating Firmware From A Computer ................................... 51
2

MiniRAE Lite User’s Guide
Uploading Firmware To The instrument From A PC .................. 51
31 Maintenance.............................................................................52
Battery Charging & Replacement ................................................ 52
Replacing The Li-ion Battery Or Alkaline Adapter ................53
PID Sensor & Lamp Cleaning/Replacement................................ 54
Cleaning The PID Sensor.............................................................55
Cleaning The Lamp Housing Or Changing The Lamp............55
Sampling Pump........................................................................ 57
Cleaning The Instrument ......................................................... 57
Ordering Replacement Parts.................................................... 57
Special Servicing Note.................................................................58
32 Troubleshooting.......................................................................59
33 Technical Support....................................................................60
34 RAE Systems Contacts............................................................61
35 Controlled Part Of Manual.......................................................64
3

MiniRAE Lite User’s Guide
Read Before Operating
This manual must be carefully read by all individuals who have or
will have the responsibility of using, maintaining, or servicing this
product. The product will perform as designed only if it is used,
maintained, and serviced in accordance with the manufacturer’s
instructions. The user should understand how to set the correct
parameters and interpret the obtained results.
CAUTION!
To reduce the risk of electric shock, turn the power off before
removing the instrument cover. Disconnect the battery before
removing sensor module for service. Never operate the instrument
when the cover is removed. Remove instrument cover and sensor
module only in an area known to be non-hazardous.
Intrinsic Safety:
US and Canada: Class I, Division 1, Group A, B, C, D, T4
0575 II 2G EEx ia II C T4
KEMA 07 ATEX 0127
-20º ≤Tamb ≤50º C
4

MiniRAE Lite User’s Guide
Special Notes
When the instrument is taken out of the transport case and
turned on for the first time, there may be some residual organic
or inorganic vapor trapped inside the detector chamber. The
initial PID sensor reading may indicate a few ppm. Enter an
area known to be free of any organic vapor and turn on the
instrument. After running for several minutes, the residual
vapor in the detector chamber will be cleared and the reading
should return to zero.
The battery of the instrument discharges slowly even if it is
turned off. If the instrument has not been charged for 5 to 7
days, the battery voltage will be low. Therefore, it is a good
practice to always charge the instrument before using it. It is
also recommended to fully charge the instrument for at least
10 hours before first use. Refer to this User Guide’s section on
battery charging for more information on battery charging and
replacement.
5

MiniRAE Lite User’s Guide
WARNINGS
STATIC HAZARD: Clean only with damp cloth.
For safety reasons, this equipment must be operated and
serviced by qualified personnel only. Read and understand
instruction manual completely before operating or servicing.
Use only a RAE Systems battery pack, part number 059-3051-000.
This instrument has not been tested in an explosive gas/air
atmosphere having an oxygen concentration greater than 21%.
Substitution of components may impair intrinsic safety.
Recharge/replace batteries only in non-hazardous locations.
Do not mix old and new batteries or batteries from different
manufacturers.
The calibration of all newly purchased RAE Systems instruments
should be tested by exposing the sensor(s) to known concentration
calibration gas before the instrument is put into service.
For maximum safety, the accuracy of the instrument should be
checked by exposing it to a known concentration calibration gas
before each day’s use.
Do not use USB/PC communication in hazardous locations.
6

MiniRAE Lite User’s Guide
AVERTISSEMENT
DANGER RISQUE D'ORIGINE ELECTROSTATIQUE:
Nettoyer uniquement avec un chiffon humide.
Pour des raisons de sécurité, cet équipment doit être utilisé, entretenu
et réparé uniquement par un personnel qualifié. Étudier le manuel
d’instructions en entier avant d’utiliser, d’entretenir ou de réparer
l’équipement.
Utiliser seulement l'ensemble de batterie RAE Systems, la reference
059-3051-000 au 059-3052-000. Cet instrument n’a pas été essayé
dans une atmosphère de gaz/air explosive ayant une concentration
d’oxygène plus élevée que 21%. La substitution de composants peut
compromettre la sécurité intrinsique. Ne charger les batteries que
dans emplacements désignés non-dangereuse.
Ne pas melanger les anciennes et les nouvelles batteries, ou bien
encore les batteries de differents fabriquants.
La calibration de toute instruments de RAE Systems doivent être testé
en exposant l’instrument a une concentration de gaz connue par une
procédure diétalonnage avant de mettre en service l’instrument pour
la première fois.
Pour une securite maximale, la sensibilité du l’instrument doit être
verifier en exposant l’instrument a une concentration de gaz connue
par une procédure diétalonnage avant chaque utilisation journalière.
Ne pas utiliser de connection USB/PC en zone dangereuse.
7

MiniRAE Lite User’s Guide
1 Standard Contents
Instrument
Calibration Kit
Travel Charger
AC/DC Adapter
Alkaline Battery Adapter
User’s Guide
2 General Information
The compact instrument is designed as a broadband VOC gas monitor
to work in non-hazardous environments. It monitors Volatile Organic
Compounds (VOC) using a photoionization detector (PID) with a
10.6 eV gas-discharge lamp. Features are:
Lightweight and Compact
•Compact, lightweight, rugged design
•Built-in sample draw pump
Dependable and Accurate
•Up to 12 hours of continuous monitoring with rechargeable
battery pack
•Designed to continuously monitor VOC vapor at parts-per-
million (ppm) levels
User-friendly
•Preset alarm thresholds for low- and high-level peak values.
•Audio buzzer and flashing LED display are activated when the
limits are exceeded.
The instrument consists of a PID with associated microcomputer and
electronic circuit. The unit is housed in a rugged case with a backlit
LCD and 3 keys to provide easy user interface. It also has a built-in
flashlight for operational ease in dark locations.
8