Rae UltraRAE 3000 User manual

UltraRAE 3000
User’s Guide
Rev. C
August 2010
P/N 059-4023-000

FCC Information
Contains FCC ID: PI4411B
The enclosed device complies with part 15 of the FCC rules.
peration is subject to the following conditions: (1) This device may
not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired
operation.
© Copyright 2010 RAE Systems, Inc.

UltraRAE 3000 User’s Guide
Contents
1 Standard Contents...................................................................9
2 General Information................................................................9
3 Physical Description .............................................................11
4 Specifications........................................................................11
5 Replacing Alkaline Batteries ................................................14
6 Charging A Lithium-Ion Battery ..........................................16
6.1 Charging A Spare Battery............................................18
6.2 Low Voltage Warning..................................................18
6.3 Clock Battery ...............................................................19
6.4 Data Protection While Power Is ff ............................19
7 User Interface .......................................................................20
7.1 Display .........................................................................22
8 perating The Instrument.....................................................23
8.1 Turning The Instrument n (Simple) ..........................23
8.2 Turning The Instrument n (Power n Zero) ............24
8.3 Turning The Instrument ff.........................................24
8.4 perating The Built-In Flashlight................................24
8.5 Pump Status .................................................................25
8.6 Calibration Status.........................................................26
9 perating Modes ..................................................................27
10 Compound-Specific peration .............................................31
10.1 Compound-Specific Measurement...............................31
10.2 Measurement Phases....................................................31
10.3 Performing A Measurement.........................................31
10.4 Separation Tube Preparation........................................32
10.5 Inserting The Separation Tube.....................................34
10.6 Measuring ....................................................................35
11 V C peration.....................................................................38
11.1 Basic User Level/Hygiene Mode (Default Settings)....38
12 Alarm Signals .......................................................................41
12.1 Alarm Signal Summary................................................42
12.2 Preset Alarm Limits & Calibration ..............................43
12.3 Testing The Alarm .......................................................43
13 Integrated Sampling Pump ...................................................43
14 Backlight...............................................................................44
15 Datalogging ..........................................................................44
15.1 Datalogging Event .......................................................44
1

UltraRAE 3000 User’s Guide
15.2 Datalogging Sample.....................................................44
15.3 Auto/Manual/Snapshot Datalogging............................45
16 Accessories ...........................................................................45
17 Standard Kit & Accessories..................................................46
17.1 AC Adapter (Battery Charger).....................................46
17.2 External Filter ..............................................................47
18 ptional Accessories ............................................................48
18.1 Calibration Adapter......................................................48
18.2 Calibration Regulator...................................................48
18.3 rganic Vapor Zeroing Kit..........................................48
19 Standard Two-Point Calibration (Zero & Span)...................49
19.1 Entering Calibration.....................................................50
19.2 Zero (Fresh Air) Calibration ........................................51
19.3 Span Calibration...........................................................52
19.4 Exiting Two-Point Calibration In Basic User Level ....55
20 Three-Point Calibration ........................................................56
20.1 Span 2 Calibration........................................................58
20.2 Exiting Three-Point Calibration...................................59
21 Programming Mode..............................................................60
21.1 Entering Programming Mode.......................................60
22 Programming Mode Menus ..................................................61
22.1 Exiting Programming Mode.........................................63
22.2 Navigating Programming Mode Menus.......................63
22.3 Calibration....................................................................64
22.3.1 Zero Calibration...................................................................64
22.3.2 Span Calibration...................................................................64
22.4 Measurement................................................................65
22.4.1 Meas. Gas.............................................................................65
22.4.2 Meas. Unit............................................................................66
22.4.3 Tube Selection......................................................................67
22.5 Alarm Setting ...............................................................68
22.5.1 High Alarm ..........................................................................69
22.5.2 Low Alarm...........................................................................69
22.5.3 STEL Alarm.........................................................................70
22.5.4 TWA Alarm.........................................................................71
22.5.5 Alarm Mode.........................................................................72
22.5.6 Buzzer & Light ....................................................................73
22.6 Datalog.........................................................................73
22.6.1 Clear Datalog .......................................................................74
2

UltraRAE 3000 User’s Guide
22.6.2 Interval..................................................................................74
22.6.3 Data Selection......................................................................75
22.6.4 Datalog Type........................................................................76
22.6.5 Manual Datalog....................................................................76
22.6.6 Snapshot Datalog.................................................................78
22.7 Monitor Setup ..............................................................78
22.7.1 Radio Power.........................................................................78
22.7.2 p Mode...............................................................................79
22.7.3 Site ID...................................................................................79
22.7.4 User ID .................................................................................80
22.7.5 User Mode............................................................................81
22.7.6 Date.......................................................................................81
22.7.7 Time......................................................................................82
22.7.8 Duty Cycle ...........................................................................82
22.7.9 Temperature Unit.................................................................83
22.7.10 Pump Speed .......................................................................83
22.7.11 Language............................................................................84
22.7.12 Real Time Protocol............................................................84
22.7.13 Power n Zero...................................................................85
22.7.14 Unit ID................................................................................85
22.7.15 LCD Contrast.....................................................................86
22.7.16 Lamp ID .............................................................................86
23 Humidity Compensation.......................................................87
24 Hygiene Mode ......................................................................87
24.1 Basic User Level & Hygiene Mode .............................88
24.2 Entering Search Mode From Hygiene Mode ...............90
24.3 ptional Graphic Screen In Search Mode ...................91
25 Advanced User Level (Hygiene Mode r Search Mode).....92
25.1 Advanced User Level & Hygiene Mode......................92
25.2 Basic User Level & Search Mode................................94
25.3 Advanced User Level & Search Mode ........................96
25.4 Diagnostic Mode..........................................................97
25.4.1 Entering Diagnostic Mode ..................................................97
25.4.2 Adjusting The Pump Stall Threshold.................................98
25.4.3 Pump High ...........................................................................98
25.4.4 Pump Low............................................................................98
25.4.5 Testing The Humidity Sensor.............................................99
25.4.6 Exiting Diagnostic Mode ................................................. 100
26 Transferring Data To & From A Computer........................102
3

UltraRAE 3000 User’s Guide
26.1 Downloading The Datalog To A PC..........................102
26.2 Uploading Firmware To The instrument From A PC 103
27 Maintenance........................................................................104
27.1 Battery Charging & Replacement ..............................104
27.1.1 Replacing The Li-ion Battery .......................................... 105
27.1.2 Replacing The Alkaline Battery Adapter........................ 105
27.2 PID Sensor & Lamp Cleaning/Replacement...................107
27.3 Cleaning The PID Sensor...........................................108
27.3.1 Cleaning The Lamp Housing r Changing The Lamp . 108
27.3.2 Determining The Lamp Type .......................................... 109
27.3.3 Sampling Pump................................................................. 110
27.3.4 Testing The T.H.P. Sensor............................................... 110
27.3.5 Cleaning The Instrument.................................................. 110
27.3.6 rdering Replacement Parts ............................................ 110
27.4 Special Servicing Note...............................................111
28 Troubleshooting..................................................................112
29 Technical Support...............................................................113
30 RAE Systems Contacts.......................................................114
31 Controlled Part f Manual ..................................................117
4

UltraRAE 3000 User’s Guide
Read Before Operating
This manual must be carefully read by all individuals who have or
will have the responsibility of using, maintaining, or servicing this
product. The product will perform as designed only if it is used,
maintained, and serviced in accordance with the manufacturer’s
instructions. The user should understand how to set the correct
parameters and interpret the obtained results.
CAUTION!
To reduce the risk of electric shock, turn the power off before
removing the instrument cover. Disconnect the battery before
removing sensor module for service. Never operate the instrument
when the cover is removed. Remove instrument cover and sensor
module only in an area known to be non-hazardous.
ATEX WARNING!
To reduce the risk of electrostatic ignition, do not use the instrument
without the rubber boot in place.
5

UltraRAE 3000 User’s Guide
Special Notes
When the instrument is taken out of the transport case and
turned on for the first time, there may be some residual organic
or inorganic vapor trapped inside the detector chamber. The
initial PID sensor reading may indicate a few ppm. Enter an
area known to be free of any organic vapor and turn on the
instrument. After running for several minutes, the residual
vapor in the detector chamber will be cleared and the reading
should return to zero.
The battery of the instrument discharges slowly even if it is
turned off. If the instrument has not been charged for 5 to 7
days, the battery voltage will be low. Therefore, it is a good
practice to always charge the instrument before using it. It is
also recommended to fully charge the instrument for at least
10 hours before first use. Refer to this User Guide’s section on
battery charging for more information on battery charging and
replacement.
6

UltraRAE 3000 User’s Guide
WARNINGS
STATIC HAZARD: Clean only with damp cloth.
For safety reasons, this equipment must be operated and serviced by
qualified personnel only. Read and understand the instruction manual
completely before operating or servicing. Use only RAE Systems
battery packs, part numbers 059-3051-000, 059-3052-000, and 059-
3054-000. This instrument has not been tested in an explosive gas/air
atmosphere having an oxygen concentration greater than 21%.
Substitution of components may impair intrinsic safety. Recharge
batteries only in non-hazardous locations.
Do not mix old and new batteries or batteries from different
manufacturers.
The calibration of all newly purchased RAE Systems instruments
should be tested by exposing the sensor(s) to known concentration
calibration gas before the instrument is put into service.
For maximum safety, the accuracy of the instrument should be
checked by exposing it to a known concentration calibration gas
before each day’s use.
Do not use USB/PC communication in hazardous locations.
7

UltraRAE 3000 User’s Guide
AVERTISSEMENT
DANGER
RISQUE D'ORIGINE ELECTROSTATIQUE: Nettoyer
uniquement avec un chiffon humide.
Pour des raisons de sécurité, cet équipement doit être utilisé,
entretenu et réparé uniquement par un personnel qualifié. Étudier le
manuel d’instructions en entier avant d’utiliser, d’entretenir ou de
réparer l’équipement.
Utiliser seulement l'ensemble de batterie RAE Systems, référence
059-3051-000 ou 059-3052-000 ou 059-3054-000. Cet instrument n’a
pas été testé dans une atmosphère de gaz/air explosive ayant une
concentration d’oxygène plus élevée que 21%. La substitution de
composants peut compromettre la sécurité intrinsèque. Ne charger les
batteries que dans des emplacements désignés non-dangereux.
Ne pas mélanger les anciennes et les nouvelles batteries, ou bien
encore les batteries de différents fabricants.
L’étalonnage de tout instrument de RAE Systems doit être testé en
exposant l’instrument à une concentration de gaz connue avant de
mettre en service l’instrument pour la première fois.
Pour une sécurité maximale, la sensibilité de l’instrument doit être
vérifiée en exposant l’instrument à une concentration de gaz connue
avant chaque utilisation journalière.
Ne pas utiliser de connexion USB/PC en zone dangereuse.
8