7
Do not overload the machine. Only use machine according to its purpose. You will work better and safer when using the
right machine in the load range specied by the manufacturer.
Keep the machine in places where it can not be reached by children. Do not allow the machine to be used by people who
are unfamiliar with how to use it and have not read these instructions. When in the hands of inexperienced users, tmachine
can be dangerous.
Keep your machiner well. Verify that the movable units function awlessly, do not lock, have broken or damaged parts that
disturb or change the function of machine BAttention! Loss of control of the power tool may result in accidents at work.
Do not use any accessories that are not recommended by the manufacturer specically for this power tool. The fact that
you can attach a particular tool or tool to the machine does not guarantee safe operation.
Never place your hands near rotating work tools.
Use suitable utensils to nd any hidden under-pipe pipelines or contact your local supply company. Contact with live wires
may cause re and electric shock. Damage to a gas pipeline may lead to an explosion. Damage to the water mains results in
major material damage and may cause electric shock.
Use only the recommended battery and charger.
he battery should always be kept away from heat sources. Do not leave it in a high temperature environment (in sunny
places, near heaters or where the temperature exceeds 50 ° C).
Avoid charging the battery at temperatures below 0 ° C.
Do not place any metal objects in the charger.
To clean the machine, use soft and dry cloth. Never use any solvent or alcohol.
Before cleaning the charger, unplug the charger.
Do not expose the charger to the inuence of moisture or water.
Do not use the charger with a damaged power cord or plug. The fault must be removed by a qualied person.
It is not allowed to use the charger if it has been subject to a strong shock, fall or has been damaged in any other way.
Verication and eventual repair must be entrusted to an authorized RAIDER service center.
Do not disassemble the charger. All repairs should be entrusted to an authorized RAIDER service center. Incorrect
installation of the charger will cause an electric shock or re.
Before proceeding with any service or cleaning the charger, it must be disconnected from the mains.
Disconnect the charger from the mains when not in use!
2. Design and use.
The tile vibrator machine is used for laying oor and wall tiles. It greatly improves work efciency, being able to be used by
professionals or amateurs. The tile machine is extremely convenient to operate, as it can also be operated with one hand. The special form
allows to maintain the balance of the load in the phase of lifting and laying the tile. The vibrations it creates are clean, strong
and thanks to them, residual air bubbles are removed, which, if embedded between the glue and the plate, cause potential
cracks. Power tools with cordless, cordless power supply are especially suitable for work related to interior decoration, room
adaptation, and more.
It is not allowed to use the power tool for activities other than its intended purpose!
3. Working with the machine.
- Place tiles in the designated position and place the machine on the tiles to be laid. Hold the control handle of the suction
cup tightly, and the suction cup will hold the tile tightly.
- Touch the micro-switch at the head on the machine by hand, and the machine starts to work. The protruding part of the
ceramic tile shall be pasted at in an instant.
4. Charging instruction
- After receiving this product, charge it rst, and the power is not full when leaving the factory,
- When charging, insert the power tail into the machine socket, then insert the plug into the power socket, and the charging
display light will be on.
- The product can work for more than 1.5 hours at most after full charge, but in order not to affect the service life of the
product, please charge every day during normal use.
- When the product is used normally, it needs to be charged once a day. If it is not used, it can be charged once a half
