Raidon SafeTANK GT1670 Series User manual

GT1670 Series
SafeTANK
User Manual

» GT1670 User Manual........................................1
1. Environmental Requirements..................................................1
2. Product Appearance and Packaging Content......................1
3. Hardware Requirements and Precautions ............................2
4. Hardware Installation................................................................3
5. Description of HDD Indicators ................................................3
6. Install The Operation System Into This Device .............4
» GT1670 產品使用說明 ........................................9
1. 環境需求.....................................................................................9
2. 產品外觀及包裝內容.................................................................9
3. 硬體需求與注意事項.................................................................10
4. 硬體安裝.....................................................................................11
5. 燈號說明.....................................................................................11
6. 外接磁碟安裝作業系統.............................................................12
iTANK GT1670 User Manual
V1.0

iTANK GT1670 User Manual
1
1. Environmental Requirements
About this Manual
Operating temperature: 0 ～40 ℃(32 ～104 ℉)
Storage temperature : -20 ～47℃(-4 ～116 ℉)
Operating voltage: 100 ～240V AC
» GT1670 User Manual
2. Product Appearance and Packaging Content
The following items should be inside the package upon opening:
Thank you for choosing the RAIDON product. This manual will familiarize you with the RAIDON
GT1670 product. We recommend reading through this manual before using the RAIDON GT1670
product. The information provided in this manual was checked before publication, but the actual product
specications may have changed before shipping; Latest product specications and updates can be
found at www.RAIDON.com.tw. No separate notications will be provided by our company. If you would
like to receive the latest RAIDON product information, manuals, and rmware, or have any questions
regarding RAIDON products, please contact your local supplier or visit www.RAIDON.com.tw for more
information.
All product-related content in this manual are copyrighted by RAIDON TECHNOLOGY, INC.
• Please check the product and accessories for any defect or missing parts. If you have any questions,
please contact your product supplier.
• Please visit the official website - Download page (https://www.RAIDON.com.tw/RAIDON2016/
download.php) to download drivers and other related resources.
GT1670-BA31 product x1
(with removable drive tray enclosed x1)
GT1670-B31 product x1
(with removable drive tray enclosed x1)
GT1670-B31A product x1
(with removable drive tray enclosed x1)
USB 3.2 C to C cable x1 USB 3.2 C to C cable x1 ――
USB 3.2 C to A cable x1 ――USB 3.2 C to A cable x1
Power cable x1 Power cable x1 Power cable x1
AC/DC Adapter x1 AC/DC Adapter x1 AC/DC Adapter x1
Quick setup guide x1 Quick setup guide x1 Quick setup guide x1
Screws and Ejector pin Screws and Ejector pin Screws and Ejector pin

iTANK GT1670 User Manual
2
Front and rear view
3. Hardware Requirements and Precautions
1. After the hard disk is formatted, the actual total capacity of the GT1670 detected by the computer
operating system will vary from the sum of all hard disk capacities stated by the manufacturer.
2. To prevent data loss, do not remove GT1670 while the system is running.
3. Please always connect the USB cable to the computer to ensure the energy saving function
operating normally.
4. If the GT1670 needs to be shut down or disconnected, please ensure the HDD is safely removed
through your operating system before turning off the power.
5. We strongly recommend backing up important data stored on the GT1670 to another storage
device or a remote site. RAIDON will not be held liable for the damage or loss of data you stored
on the GT1670.
A. HDD access light
B. HDD tray key lock
C. HDD tray handle
D. USB 3.1 Gen2 Type-C (10Gbps)
E. Power switch
F. Power socket
Front View Rear View
NOTE:
Please make sure that the product is connected to the host (power on status) before turning
on the power, otherwise the product will be on the sleep mode.

iTANK GT1670 User Manual
3
4. Hardware Installation
5. Description of HDD Indicators
Status HDD Status Light
Data access Blue light flashing
HDD idle Blue light always on
Sleep mode Blue light off
Please follow the instructions below to complete the hardware installation.
1. Place the system on a stable surface. Ensure that it is well ventilated without blockage to the vent
and kept away from areas near water and damage prone areas.
4. Once the hard disk is installed, slide the enclosure into the system and close the handle.
5. Depending on the computer's USB port type, select the corresponding USB cable from the
accessory to connect the computer to the GT1670's USB 3.1 Type-C port.
6. Connect the power cord to the power adapter, connect the connectors at both ends to the GT1670
and the power socket, and then start the GT1670.
7. After the computer is turned on, your operating system will automatically recognize the storage
capacity; after the recognition is successful, format the system according to your desired storage
format and follow the instructions of the operating system. After the hard disk is formatted, the
GT1670 can be used directly.
LockLock UnlockUnlock
2. Use the key included in the accessory kit to
unlock the HDD tray key lock, and then press the
HDD tray key lock. The removable drive tray will
pop open and extract the removable drive tray.
3. For 3.5" HDD/SSD, please secure it by use six the larger screws included in the accessory kit.
For 2.5" HDD/SSD, please secure it by use four the smaller screws included in the accessory kit.
※If you are using a USB 3.2 C to A cable, the Type-A on the host side needs to be USB 3.2 Gen2
for best access performance.

iTANK GT1670 User Manual
4
6. Install The Operation System Into This Device
1. Need to have network online capabilities. If a wireless network is available, you can choose it
from the Wi-Fi menu in the menu bar. This menu is also available in macOS Recovery.
2. Turn on your Mac and immediately press and hold Command ( ⌘)-R. Continue holding until you
see the Apple logo or a spinning globe. Startup is complete when you see the utilities window:
3. If you need to erase your disk before installing macOS, select Disk Utility from the Utilities window,
then click Continue. You probably don't need to erase, unless you're selling or giving away your
Mac or have an issue that requires you to erase.
Install macOS (Use macOS Mojave 10.14 for example)

iTANK GT1670 User Manual
5
4. Install macOS. Choose Reinstall macOS from the Utilities window, and click continue.
5. Follow the onscreen instructions, select agree to the software license agreement, and then select
the disk to start the installation.
6. Please allow installation to complete without putting your Mac to sleep or closing its lid. During
installation, your Mac might restart and show a progress bar several times, and the screen might
be empty for minutes at a time.

iTANK GT1670 User Manual
6
Install Windows
1. The following content is an example of using the software "WinToUSB Free Edition". For related
specications and copyrights, please refer to the software official website for details.
2. After the software is installed, press the shortcut icon of the desktop twice to open Hasleo
WinToUSB.
3. On the left side of the interface, select "Mirror to USB" and click the right folder icon to select the
ISO le for Windows 10.
4. Select the version of Windows you want to install and go to the next step.
Note: WinToUSB Free Edition does not support Windows Professional and Enterprise editions.
(Use Windows 10 Home Edition for example)

iTANK GT1670 User Manual
7
5. Select the USB external drive to install.
6. Select the version of the disk partition configuration according to your personal hardware
specications, then execute "Yes" to proceed to the next step.
7. Follow the default and follow the next step.

iTANK GT1670 User Manual
8
8. Windows 10 is installed to an external hard drive. After the installation is complete, click the "End"
button, and then conrm to leave.
9. Conrm that the external hard disk is inserted in the USB slot of the computer. After rebooting,
enter the BIOS or UEFI adjusts to the USB external hard disk box as the rst boot sequence, and
saves the settings and leaves.
10.Then start the installation process for Windows 10, and follow the system instructions and
personal requirements to complete the setup.
Note: The screenshot is for illustration only, and the actual situation varies depending on each motherboard.