Raymarine SmartPilot ST8002 User manual

D6398-2
86125-1
PWR STEER
WIND 45S
WIND 30P
WIND 30P
WIND 30P
WIND 30P
LAMP
Use disp to adjust lighting level.
Wait 10 sec to return to previous mode.
1 sec1 sec
Wind
Wind
Wind
Port Starboard
To leave Power Steer mode:
for manual
control
for autopilot
control
Autopilot response controls course-keeping accuracy.
Higher response settings keep a tighter course but
increase the amount of drive activity and battery use.
Set to a level appropriate for your needs
RESPONSE
Use or to adjust response level.
Press disp to return to previous mode.
To Automatically Steer
to a Fixed Wind Angle
SmartPilot
Power Steering
To Adjust Autopilot
Course-keeping accuracy
Quick Start Guide
SmartPilot®
ST8002 Controller
To Adjust Lighting Level
mode
®

STANDBY AUTO
AUTO
AUTO
AUTO
TRACK
STARBOARD
AUTO
STANDBY
NEXT WPT
m
o
d
e
r
es
'm
track
res
p
55˚
85˚
mode res'm
track
resp
D6399-2
Display Layout
To activate the Autopilot For Manual Control
To change the
Autopilot Heading
To follow a Route
set on a Chartplotter
resp
Press to display
response level
auto
Press to activate
the Autopilot
standby
Press for Manual Control
res'm
Press to resume
previous course
mode
Press for
Power Steer mode
track
When the Autopilot is activated,
press to follow a route from a
connected navigation system.
Press a gain to accept the
new course
rotary control
clockwise
= turn to starboard
anti-clockwise
= turn to port
disp
Press to display
data pages
Press for 1 second
for lamp control
Press for 3 seconds
for power off
OK?OK?
standby + auto
Press for Wind Vane mode
&
Press to adjust calibration,
response and gain