real living BG-102117 User manual










GENERAL BEST PRACTICES FOR ASSEMBLY:
MAINTENANCE:
CARE AND CLEANING:


WARNINGS:



PARTS LIST
HARDWARE LIST
x2
A
A
x1
A
B
x1
A
C
x1
A
D
x1
A
E
x4
A
1
x20
A
2
x2
A
3
x2
A
4
x2
A
5
x1
A
F
x1
A
G
Side Frame Top Panel Middle Panel
Bottom PanelBack Panel
Upper Vertical Panel
Bottom Vertical Panel
Adjuster Phillips Screw Cam Bolt Cam Lock Wood Dowel
x1
A
6
Phillips head screw Driver

HELPFUL HINTS
•Separate parts before starting
HOW TO INSTALL CAM LOCK
Place the other panel over the panel with the bolt,
then insert the cam lock to join the bolt’s head.
Alignment: The cross
points towards the panel
with the bolt.
Turn the cam lock clockwise.

STEP 1
Assembled View:
STEP 2
Assembled View:
A
3
x2
A
4
A
5
x2
x2
A
B
A
3
A
4
A
BA
CA
5
Insert Cam Bolt (3) into Top Panel (B). Fully Tighten.
Insert Wood Dowel (5) into Upper Vertical Panel (C).
Allign Cam Bolt (3) in Top Panel (B) with the holes in the edge of Upper Vertical Panel (C) and slide into place.
Insert Cam Lock (4) into the indicated holes in Upper Vertical Panel (C) and fully tighten.
A
3

STEP 3
STEP 4
Assembled View:
Assembled View:
A
C
A
D
A
E
Align Wood Dowel (5) in Upper Vertical Panel (C) with the holes in Middle Panel (D) and slide into place.
A
5
Align Wood Dowel (5) with the holes in Bottom Vertical Panel (E) and slide into place.
A
5

STEP 5
STEP 6
Assembled View:
Assembled View:
x2
A
E
A
F
A
2
A
2
A
E
G
x2
A
2
A
2
Attach Back Panel (F) to Bottom Vertical Panel (E) with Phillips Screw (2).
Attach Bottom Panel (G) to Bottom Vertical Panel (E) with Phillips Screw (2).

STEP 7
STEP 8
Assembled View:
Assembled View:
A
1
x4
x16
A
2
A
2
A
A
A
A
A
1
A
A
A
A
Insert Adjuster (1) into Side Frame (A).
Attach Side Frame (A) to the parts assembled in Step 6 with Phillips Screw (2).
Assembly is now complete.