real living BQ092-1322 User manual

Page 2 of 8
MAINTENANCE:
WARNINGS:
GENERAL BEST PRACTICES FOR ASSEMBLY:
Regularly check hardware and tighten if necessary.
Use dry cloth to wipe surfaces.
Keeping Away from water and fire.
SUGGEST 2 ADULTS TO ASSEMBLE THIS PRODUCT IN ANOPEN AREA.
DO NOT USE POWER TOOLS TO ASSEMBLE
TO PREVENT SERIOUS INJURY OR DEATH, THIS PRODUCT IS EQUIPPED WITH A WALL ANCHORING SYSTEM.
BEFORE THIS PRODUCT CAN BE USED, THE WALL ANCHORING SYSTEM MUST BE INSTALLED AS DIRECTED IN
THE ASSEMBLY INSTRUCTIONS.
Read all instructions before starting
Clear a flat covered space to begin
Two adults are recommended for assembly
Note that hardware required is provided for every step
Pay attention to orientation
Letter of the part corresponds to a sticker on the product
Number of the hardware corresponds to its number in the package
Helpful hints provided along the way

I
J
Page 3 of 8
NO QTY DESCRIPTION
A 2pcs
B1pc
C2pcs
D2pcs
E1pc
F 1pc
G 1pc
PARTS LIST
Large Shelf Panel
Small Shelf Panel
Bottom Metal Leg
Front Upper Frame
Front L Shape Tube
H1pc
I 1pc
J 1pc
Metal Plate
A
A
F
G
H
I
J
B
C
C
D
D
E
Back Upper Frame
Back L Shape Tube
Front Bottom Frame
Back Bottom Frame

Page 4 of 8
Screw(4×35mm)
4
54pcs
8pcs
38pcs
HARDWARE LIST
NO QTYPARTS DESCRIPTION
1 20pcs
220pcs
HELPFUL HINTS
Bolt(6×10mm)
Bolt(6×35mm)
Cam Lock
Cam Bolt
10
11 4pcs
2pcs
91pc
7 2pcs
84pcs
Allen Wrench
Rubber Feet Sticker
Plastic Lock Strap
Plastic Plug
Anchor Bracket
Screw(4×12mm)
64pcs
HOW TO INSTALL THE CAM BOLT AND CAM LOCK
a b c
•A Phillips Screwdriver and a flat head screwdriver will be needed for assembly and are not provided.
•Separate parts before starting.

Page 5 of 8
2
1
3
3x
89x 1
3
9
3
3
33
3
3
3
G
H
F
F
F
E
E
E
I
I
J
J
J
1. Carefully place the Frames (E, F, I and J) on their back as shown in the diagram.
2. Insert Front Upper Frame (E) into Front Bottom Frame (I), Back Upper Frame (F) into Back Bottom Frame (J)
as shown in the diagram.
Tip: the Bolt holes on the Frames (E, F, I and J) need to be facing the same direction.
Secure Front Upper Frame (E) and Front Bottom Frame (I), Back Upper Frame (F) and Back Bottom
Frame (J) with Bolt (3) using Allen Wrench (9) as shown in the diagram. Fully tighten bolts.
4
9
4x49x1
4
4
4
4
E
F
HG
J
1. Align the ends of Back L Shape Tube (H) with the holes in assembled
frame (F and J) as shown in the diagram.
2. Secure the Back L Shape Tube (H) to the assembled frame (F and J) with
Bolt (4) using Allen Wrench (9). Fully tighten the bolts.
3. Align the ends of Front L Shape Tube (G) with the holes in assembled
frame (E and I) as shown in the diagram.
4. Secure the Front L Shape Tube (G) to the assembled frame (E and I) with
Bolt (4) using Allen Wrench (9). Fully tighten the bolts.
TIP: All bolt holes on the assembled Frames and L Shaped Tubes should be
facing the same direction.
I
I

Page 6 of 8
4
5
1x20
6x
4
1111
11111
66
6
6
E
FHGI
J
A
A
CC
Insert Cam Bolt (1) into Assembled Front and Back Frame. Fully tighten using Phillips
screwdriver (not provided).
1111
1
1
1
1111
62x
10
2
2
2
2
2
FH
J
A
A
B
Attach Metal Plate (C) to the Back of Large Shelf Panel (A) with Screw (6) using using Phillips
screwdriver (not provided). Fully tighten bolts.
1. Align Cam Bolt (1) in Back Upper Frame (F), Back Bottom Frame (J) and Back L Shape
Tube (H) with the holes in the edge of Large Shelf Panel (A) and Small Shelf Panel (B) and
slide into place.
TIP: Metal Plate (C) should fully insert into the groove on Back Upper Frame (F) and Back
Bottom Frame (J)
2. Secure the panels and the Assembled Back Frame together with Cam Lock (2) using Flat
Head screwdriver (not provided).
C
C

Page 7 of 8
72x
10
2222
2
2
2
222
G
E
I
A
A
B
1. Align Cam Bolt (1) in Front Upper Frame (E), Front Bottom Frame (I) and Front L Shape
Tube (G) with the holes in the edge of Large Shelf Panel (A) and Small Shelf Panel (B) and
slide into place.
TIP: Metal Plate (C) should fully insert into the groove on Front Upper Frame (E) and Front
Bottom Frame (I)
2. Secure the panels and the Assembled Front Frame together with Cam Lock (2) using Flat
Head screwdriver (not provided).
C
C
8
11
11
4
4
4
4
11 11
11
4x
49x 111 x 4
I
J
D
D
1. Attach Bottom Metal Leg (D) to the Front Bottom Frame (I) and Back Bottom Frame (J) with Bolt (4) using
Allen Wrench (9). Fully tighten bolts.
2. Attach Rubber Feet Sticker (11) to the bottoms of Bottom Metal Leg (D).

Page 8 of 8
95x
47x 28x 410 x 2
F
5
5
7
7
7
7
8
8
8
8
10
10
step 2
step 3
step 4
step 6
step 5
1. Place the assembled Console in the desired position. Mark where the Console meet the wall.
Remove the Console.
2. Place the Anchor Brackets (7) below the mark on the wall. Mark the position of the holes in
the Anchor Bracket (7) on the wall.
3. Drill holes in the marked position.
4. Insert the Plastic Plugs (8).
5. Attach the Anchor Bracket (7) to the Plastic Plugs (8) with Screw (5). Fully tighten screws.
6. Return the Console to the desired position and attach the Anchor Brackets (7) and Back
Metal Frame together with Plastic Lock Strap (10).
Assembly is now complete.
7
step 1
F