red lion IAMS 0001 User manual

US/UK
FR
DE
Page 1
Page 29
Seite 57
Models No. 0001 /
0011 / 0010
Drawing No. LP0767
Version No. 104
Revision Date 15/07
IAMS

1
IAMS 0001 / 0011 / 0010
CONTENTS
Warning! ............................................................................. 2
Symbol identification.......................................................... 3
Safety instructions.............................................................. 3
How to dismantle the IAMS Devices ................................. 5
When front LED lights red / display shows AO.ER............ 5
Advanced features ............................................................. 6
Application ......................................................................... 6
Technical characteristics.................................................... 6
PGMMOD00 Display/programming front.......................... 7
Applications........................................................................ 8
Order codes ....................................................................... 9
Electrical specifications...................................................... 9
Visualisation of sensor error detection and
input signal outside range ................................................. 13
Sensor error detection limits.............................................. 14
Error indications ................................................................. 14
connections........................................................................ 15
Block diagram .................................................................... 16
Setup / operating the function keys................................... 17
Routing diagram................................................................. 23
Routing diagram................................................................. 26
Advanced settings (ADV.SET) ............................................ 26
Scrolling help text in display line 3 .................................... 27
Graphic depiction of relay action Setpoint ........................ 28
Graphic depiction of relay action Window......................... 28

2
WARNING!
The IAMS devices are designed for connection to hazardous
electric voltages.
Ignoring this warning can result in severe personal injury or
mechanical damage.
To avoid the risk of electric shock and fire, the safety instruc-
tions of this manual must be observed and the guidelines
followed. The specifications must not be exceeded, and the
devices must only be applied as described in the following.
Prior to the commissioning of the devices, this manual must be
examined carefully.
Only qualified personnel (technicians) should install these
devices. If the equipment is used in a manner not specified by
the manufacturer, the protection provided by the equipment
may be impaired.
WARNING
To keep the safety distances, the relay contacts on the devices
must not be connected to both hazardous and non-hazardous
voltages at the same time.
The IAMS devices must be mounted on a DIN rail according to
DIN 46277.
WARNING!
Until the devices are fixed, do not connect hazardous voltages
to the devices.
The following operations should only be carried out on
disconnected devices and under ESD safe conditions:
General mounting, connection and disconnection of wires.
Troubleshooting the devices.
Repair of the device must be done by Red Lion Controls only.
HAZARD-
OUS
VOLTAGE
INSTAL-
LATION
GENERAL
WARNING
Do not open the front plate of the devices as this will cause
damage to the connector for the display / programming module
PGMMOD00. The devices contain no DIP-switches or jumpers.

3
SYMBOL IDENTIFICATION
Triangle with an exclamation mark: Warning / demand.
Potentially lethal situations.
The CE mark proves the compliance of the devices with
the essential requirements of the directives.
The double insulation symbol shows that the devices
are protected by double or reinforced insulation.
SAFETY INSTRUCTIONS
DEFINITIONS:
Hazardous voltages have been defined as the ranges: 75 to 1500 Volt DC, and
50 to 1000 Volt AC.
Technicians are qualified persons educated or trained to mount, operate, and
also troubleshoot technically correct and in accordance with safety regulations.
Operators, being familiar with the contents of this manual, adjust and operate
the knobs or potentiometers during normal operation.
RECEIPT AND UNPACKING:
Unpack the device without damaging it and make sure that the manual always
follows the device and is always available. The packing should always follow
the device until this has been permanently mounted.
Check at the receipt of the device whether the type corresponds to the one
ordered.
ENVIRONMENT:
Avoid direct sunlight, dust, high temperatures, mechanical vibrations and shock,
as well as rain and heavy moisture. If necessary, heating in excess of the stated
limits for ambient temperatures should be avoided by way of ventilation.
All devices fall under Installation Category II, Pollution Degree 1, and Insulation
Class II.
MOUNTING:
Only technicians who are familiar with the technical terms, warnings, and instruc-
tions in the manual and who are able to follow these should connect the devices.
Should there be any doubt as to the correct handling of the devices, please
contact your local distributor or, alternatively, Red Lion Controls Worldwide
Headquarters, 20 Willow Springs Circle, York, PA 17406 USA, Phone: +1 (717)
767-6511, Fax: [phone]

4
Mounting and connection of the devices should comply with national legislation
for mounting of electric materials, i.a. wire cross section, protective fuse, and
location. Descriptions of input / output and supply connections are shown in the
block diagram and side label.
The following apply to fixed hazardous voltages-connected devices:
The max. size of the protective fuse is 10 A and, together with a power
switch, it should be easily accessible and close to the device. The power
switch should be marked with a label indicating that it will switch off the
voltage to the device.
Year of manufacture can be taken from the first two digits in the serial number.
UL INSTALLATION REQUIREMENTS:
Use 60/75°C copper conducters only
For use only in pollution degree 2 or better
Max. ambient temperature..................... 60°C
Max. wire size......................................... AWG 26-14
UL file number........................................ E324843
CALIBRATION AND ADJUSTMENT:
During calibration and adjustment, the measuring and connection of external
voltages must be carried out according to the specifications of this manual. The
technician must use tools and instruments that are safe to use.
NORMAL OPERATION:
Operators are only allowed to adjust and operate devices that are safely fixed
in panels, etc., thus avoiding the danger of personal injury and damage. This
means there is no electrical shock hazard, and the device is easily accessible.
CLEANING:
When disconnected, the devices may be cleaned with a cloth moistened with
distilled water.
LIABILITY:
To the extent that the instructions in this manual are not strictly observed, the
customer cannot advance a demand against Red Lion that would otherwise
exist according to the concluded sales agreement.

5
HOW TO DISMANTLE THE IAMS DEVICES
First, remember to demount the connectors with hazardous voltages.
Picture 1:
Detach the device from the DIN rail
by lifting the bottom lock.
When front LED lights red / display shows AO.ER
IAMS0001 and IAMS0011 are designed with a high safety level. Therefore, a
continuous measurement of the outgoing current is carried out on a 4...20
mA output signal. If the current output signal is different from the internally
calculated output value or the current output is 0 (due to e.g. an open circuit
breakage), an error mode switches on the red front LED and disables the
relays. This function is not a default option but must be actively selected via
the programming menu (S4...20 & S20...4).
The error mode can only be reset by switching off and then switching on the
supply voltage to the device.

6
IAMS 0001 / 0011 / 0010
• Input for RTD, TC, Ohm, potentiometer, mA and V
• 2-wire supply > 16 V
• FM-approved for installation in Div. 2
• Output for current, voltage and 2 relays
• Universal AC or DC supply
Advanced features
• Programmableviadetachabledisplayfront(PGMMOD00),process
calibration, signal and relay simulation, password protection, error diagnostics
and selection of help text in several languages.
Application
• Linearised,electronictemperaturemeasurementwithRTDorTCsensor.
• Conversionoflinearresistancevariationtoastandardanaloguecurrent/volt
age signal, i.e. from solenoids and butterfly valves or linear movements with
attached potentiometer.
• Powersupplyandsignalisolatorfor2wiretransmitters.
• Processcontrolwith2pairsofpotentialfreerelaycontactsandanalogue
output.
• Galvanicseparationofanaloguesignalsandmeasurementoffloatingsignals.
• TheIAMS0001andIAMS0011havebeendesignedaccordingtostrictsafety
requirements and are thus suitable for application in SIL 2 installations.
Technical characteristics
• WhenthedevicesareusedincombinationwiththePGMMOD00display/
programming front, all operational parameters can be modified to suit any
application. As the devices are designed with electronic hardware switches, it
is not necessary to open them for setting of DIP-switches.
• Agreen/redfrontLEDindicatesnormaloperationandmalfunction.Ayellow
LED is ON for each active output relay.
• Continuouscheckofvitalstoreddataforsafetyreasons.
• 4port2.3kVACgalvanicisolation.

7
PGMMOD00 DISPLAY/PROGRAMMING FRONT
Functionality
The simple and easily understandable menu structure
and the explanatory help texts guide you effortlessly and
automatically through the setup steps, thus making the
product very easy to use. Functions and setup options are
described in the section ”Setup / operating the function
keys”.
Application
• Communicationsinterfaceformodificationofoperationalparametersinthe
IAMS devices.
• Canbemovedfromonedevicetoanotherofthesametypeanddownload
the setup of the first device to subsequent devices.
• Fixeddisplayforreadoutofprocessdataandstatus.
Technical characteristics
• LCDdisplaywith4lines;Line1(H=.2inch/5.57mm)showsinputsignal,
line2(H=.2inch/3.33mm)showsunits,line3(H=.13inch/3.33mm)shows
analogue output or tag no. and line 4 shows communication and relay status.
• Programmingaccesscanbeblockedbyassigningapassword.The
password is saved in the device in order to ensure a high degree of
protection against unauthorised modifications to the setup.
Mounting / installation
• ClickPGMMOD00ontothefrontofthedevice.

4 3 2 44
43
42
41
12
14
13
11
10 V
1 V
10 V
1 V
24
23
22
21
33
32
31
+
-
+
+
+-
+
-
+
-
+
8
APPLICATIONS
Input signals:
Current
Volt-
age
Potenti-
ometer RTD and lin.R TC
Connect., wires
Output signals:
Relays
Supply:
21.6...253 VAC
or
19.2...300 VDC
Analogue, 0/4...20 mA and voltage

9
Order codes
IAMS0001 Universal transmitter with analog output
IAMS0011 Universal transmitter with analog output / 2 relays
IAMS0010 Universal limit switch with 2 relays
PGMMOD00 Display / programming module
Electrical specifications
Specifications range:
-20°C to +60°C
Common specifications:
Supply voltage, universal ............................ 21.6...253 VAC,
or 19.2...300 VDC
Max. consumption....................................... ≤2.5 W
Fuse............................................................. 400 mA SB / 250 VAC
Isolation voltage, test / operation ............... 2.3 kVAC / 250 VAC
Communications interface .......................... Programming front PGMMOD00
Signal / noise ratio ...................................... Min. 60 dB (0...100 kHz)
Response time (0...90%, 100...10%):
Temperature input................................... ≤ 1 s
mA / V input............................................ ≤ 400 ms
Calibration temperature............................... 20...28°C
Display resolution: The temperature display automatically changes to tenths
with values less than 1000 degrees.
Accuracy, the greater of the general and basic values:
General values
Input
type Absolute accuracy Temperature coefficient
All ≤±0.1% of span ≤±0.01% of span / °C