Regent Lighting Solutions Bedford Bollard - Buried User manual

1
2
www.regentlight.co.za
www.regentlight.co.za
INSTALLATION INSTRUCTIONS
ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN
ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN
1
PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.
PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.
Regent Lighting reserves the right to change specifications modify designs and discontinue items without
incurring obligation and whilst every effort is made to ensure that descriptions, specifications and other
information in this catalogue are correct, no warranty is given in respect thereof and the company shall not be
liable for any error therein.
WARNING: TO AVOID FIRE, SHOCK OR DEATH
TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT THE POWER IS OFF BEFORE WIRING
ALL LUMINAIRES SUPPLIED AND TO BE INSTALLED ABOVE AND BELOW 5 METERS ARE IN COMPLIANCE WITH SANS
60598 SECTION 3.5.6 ACCORDING TO THE MANUFACTURER GUARANTEE AND WARRANTY
Electrical products can cause death, injury, or damage to
property. Installation of this product must be carried out by a
qualified electrician, in compliance with SANS 10142 or
corresponding regulations of the country of installation. On
completion of installation, the Certificate of Compliance must
be updated.
Bedford Bollard - Buried
Electronic/Magnetic Control Device
WARNING
Electronic/Magnetic Control Device
WARNING
3 - 13 MAIN REEF SERVICE ROAD, CORNER
SPRINGBOK AND MAIN REEF ROAD, INDUSTRIA,
JOHANNESBURG. SOUTH AFRICA.
TEL : [phone]
www.regentlight.co.za
RE GENT L I GHT ING A D IVIS ION OF WAH L
IN DUST RIES.
Requirements:
Be sure the electricity
to the system you are
working on is
isolated.
If the main supply
power (live) is on, it
will cause damage
to the luminaire.
A. Ensure the electrical
cable is fed through the
mounting hole.
B. Insert the stubby into
the mounting hole and
feed the electrical cable
t h r o u g h t h e s t u b b y
towards the surface,
ensuring the cable is fed
parallel into the stubby to
the pathway.
Ensure the bollard is
in st alled in th e right
direction according to
the pathway.
DO NOT CONNECT THE FITTING LIVE
July 2017
Ground Level
Ground Level
Save These Instructions for Future Reference
Save These Instructions for Future Reference
ELECTRIC SHOCK
HAZARD
This equipment is to be
serviced by trained
personnel only.
ELECTRIC SHOCK
HAZARD
This equipment is to be
serviced by trained
personnel only.
Bedford Bollard - Buried
BURIED STUBBY
ORIENTATION
PATHWAY / LIGHT SOURCE
(Access Door)
Service Side
Ground Level
Ground Level
Buried Stubby
A
B
LIGHT_5
11,1,10-1-1
LIGHT_6
11,1,10-1-1
Clear diffuser
with louvre
Bedford Dome
LIGHT_5
11,1,10-1-1
LIGHT_6
11,1,10-1-1
Opal diffuser
with louvre
LIGHT_5
11,1,10-1-1
LIGHT_6
11,1,10-1-1
LIGHT_5
11,1,10-1-1
LIGHT_6
11,1,10-1-1
LIGHT_5
11,1,10-1-1
LIGHT_6
11,1,10-1-1
LIGHT_5
11,1,10-1-1
LIGHT_6
11,1,10-1-1
Clear diffuser
with louvre
Opal diffuser
with louvre
Bedford Cone
Clear diffuser
with louvre
Opal diffuser
with louvre
Bedford Flat

www.regentlight.co.za
www.regentlight.co.za
3
7
8
This product should be installed by a competent person i.e. Qualified electrician.
This product requires a constant stable electrical supply 220V - 240V VAC 50Hz - alternating current.
The product must be regularly maintained, including the replacement of lamps/LED timeously.
This product could be HAZARDOUS if not used correctly, it could cause electric shock, serious bodily harm or death.
This product is not a toy, please keep away from children.
This product may contain small parts that can be swallowed.
Use only the correct light bulbs/LED as stipulated on the carton for the product.
Any modifications of this product after supply will result in the guarantee being void.
Spare parts may become unavailable over time.Items can vary slightly from the picture on the carton
Coastal humidity can affect the longevity of the light fitting over time.
Be sure to follow the steps in the order given.
Read instructions carefully.
Important Safety Instructions
2. Connect the Switched
Live (S/L), Neutral (N) and
Earth (E) cable(s) to the
cable joining kit (not
supplied).
SWITCHED LIVE – (Red or
B r o w n ) t o t e r m i n a l
marked L
NEUTRAL – (Black or Blue)
to terminal marked N
EARTH – (Green/Yellow)
to terminal marked.
Mains to
Luminaire
Earth Loop
Green/Yellow
Switch
Wire Red
(L) Brown
(E) Green/Yellow
(N) Blue
Neutral loop
Black or Blue
Cable
Tail
Base
Cable Joining kit
not supplied*
22
3. Fix the base mounting
to the required position
w i t h t h e f a s t e n e r s
provided.
Ensure the b ollard i s
aligned correctly to the
base.
Neatly place the cable
joint into the stubby and
ensur e the ga ske t is
secure.
Access Door
Cable Joining kit
3
Access door must
be positioned away
from the pathway
6
4
5
6. Switch on the power
supply.
4. Ensure that there are
no exposed conductors,
loose strands or trapped
insulation and that the
f i t t i n g i s f a ci n g t h e
correct way, towards the
pathway.
5. To install or change the
lamp/LED, unscrew and remove
the lid from the main body, taking
care of any loose parts which may
fall.
Ensure the new lamp/LED is the
correct wattage/specifications
and is securely located in the lamp
holder or mounting surface.
Once replacement/maintenance
is complete, replace the lid,
ensuring the gasket is securely in
place.
LIGHT_5
11,1,10-1-1
LIGHT_6
11,1,10-1-1
Clear diffuser
with louvre
Bedford Dome
LIGHT_5
11,1,10-1-1
LIGHT_6
11,1,10-1-1
Opal diffuser
with louvre
LIGHT_5
11,1,10-1-1
LIGHT_6
11,1,10-1-1
LIGHT_5
11,1,10-1-1
LIGHT_6
11,1,10-1-1
LIGHT_5
11,1,10-1-1
LIGHT_6
11,1,10-1-1
LIGHT_5
11,1,10-1-1
LIGHT_6
11,1,10-1-1
Clear diffuser
with louvre
Opal diffuser
with louvre
Bedford Cone
Clear diffuser
with louvre
Opal diffuser
with louvre
Bedford Flat
DO NOT PLUG
(CONNECT) WHEN
LIVE AS IT WILL CAUSE
DAMAGE TO THE
LUMINAIRE.