Regent Lighting Solutions Lumina Mini User manual

1
2
www.regentlight.co.za
www.regentlight.co.za
INSTALLATION INSTRUCTIONS
ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN
ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN
PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.
PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.
Regent Lighting reserves the right to change specifications modify designs and discontinue items without
incurring obligation and whilst every effort is made to ensure that descriptions, specifications and other
information in this catalogue are correct, no warranty is given in respect thereof and the company shall not be
liable for any error therein.
ALL LUMINAIRES SUPPLIED AND TO BE INSTALLED ABOVE AND BELOW 5 METERS ARE IN COMPLIANCE WITH SANS
60598 SECTION 3.5.6 ACCORDING TO THE MANUFACTURER GUARANTEE AND WARRANTY
TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT THE POWER IS OFF BEFORE WIRING
WARNING: TO AVOID FIRE, SHOCK OR DEATH
Electrical products can cause death, injury, or damage to
property. Installation of this product must be carried out by a
qualified electrician, in compliance with SANS 10142 or
corresponding regulations of the country of installation. On
completion of installation, the Certificate of Compliance must
be updated.
Lumina Mini
WARNING
Electronic Control Device
Electronic Control Device
WARNING
3 - 13 MAIN REEF SERVICE ROAD, CORNER
SPRINGBOK AND MAIN REEF ROAD, INDUSTRIA,
JOHANNESBURG. SOUTH AFRICA.
TEL : [phone]
www.regentlight.co.za
RE GENT L I GHT ING A D IVIS ION
OF WA HL IND USTR IES.
Requirements:
* Gear Compartment
ŸBe sure the electricity
to the system you are
working on is
isolated.
DO NOT PLUG
(CONNECT) WHEN
LIVE AS IT WILL CAUSE
DAMAGE TO THE
LUMINAIRE.
DO NOT CONNECT THE FITTING LIVE
April 2022
Save These Instructions for Future Reference
ELECTRICAL CONNECTIONS
1
Save These Instructions for Future Reference
ELECTRIC SHOCK
HAZARD
This equipment is to be
serviced by trained
personnel only.
ELECTRIC SHOCK
HAZARD
This equipment is to be
serviced by trained
personnel only.
Lumina Mini
For non user replaceable light source: The light source contained in this luminaire
shall only be replacedby the manufacturer or his/her service
agent or a similar qualied person
Ø76mm pole
1A. Ensure the pole is
installed correctly and
that the pole has the
Ø76mm with a Ø42mm
spigot pole
correct diameter of
1B. Prepare the cable
from the pole to be
connected to the
luminaire.
*161.4mm
*50mm
*122mm
B
A
Gear Compartment

www.regentlight.co.za
www.regentlight.co.za
2
5
7
8
4
This product should be installed by a competent person i.e. Qualified electrician.
This product requires a constant stable electrical supply 220V - 240V VAC 50Hz - alternating current.
The product must be regularly maintained, including the replacement of lamps/LED timeously.
This product could be HAZARDOUS if not used correctly, it could cause electric shock, serious bodily harm or death.
This product is not a toy, please keep away from children.
This product may contain small parts that can be swallowed.
Use only the correct light bulbs/LED as stipulated on the carton for the product.
Any modifications of this product after supply will result in the guarantee being void.
Spare parts may become unavailable over time.Items can vary slightly from the picture on the carton
Coastal humidity can affect the longevity of the light fitting over time.
Be sure to follow the steps in the order given.
Read instructions carefully.
Important Safety Instructions
5. Switc h on the p ower
supply
Level
Mains to
Luminaire
Earth Loop
Green/Yellow
Switch
Live Red
Neutral loop
Black or Blue
(L) Brown
(E) Green/Yellow
(N) Blue
NEUTRAL – (Black or Blue) to
terminal marked N
Connect the Switched Live
(S/L), Neutral (N) and Earth
(E) cable(s) to the terminal
block.
SWITCHED LIVE – (Red or
Brown) to terminal marked
L
EARTH – (Green/Yellow) to
terminal marked E.
2. Connect the electrical
cable tail supplied through
the spigot/gland to the
access door.
3
Ensure the fitting is
level horizontally.
Swing the lid to a 45 degree
angle and remove/pull from
the hinges.
4B. To access gear
compartment, undo latches
and lower lid, taking care of
any loose parts which may
fall.
If the light on the surge
arrestor is off, the surge
arrestor has blown and needs
to be replaced.
4A. To install or change the
LED / electronic components,
unscrew and remove the
diffuser to access LED
compartment.
4C. To remove lid, undo
latches and allow the lid to
hang from the hinges before
removing the safety cable
from the body and
disconnecting the cable
connector block.
Ensure that safety cable is
secured before replacing lid.
Ensure the gasket is securely
in place when replacing the
diffuser / relatching the gear
compartment cover.
3. Align and fasten the
fitting’s spigot onto the pole
using the spigot and tighten
the stainless steel fasteners .
Ensure that there are no
exposed conductors loose
strands or trapped insulation.
Ensure the fitting is level
horizontally.
42mm
Spigot Pole
76mm Pole
Adapter for
Ø76mm Pole DO NOT PLUG
(CONNECT) WHEN
LIVE AS IT WILL CAUSE
DAMAGE TO THE
LUMINAIRE.
MAINTANANCE
A
C
Diffuser
Safety Cable
45°
Safety Cable
B
Surge Arrestor
M8 Captive screws
x3 13 N.m (±0.5)
M6 Captive screws
x3 13 N.m (±0.5)