ResMed AirFit N20 User manual

ResMed.com/AirFitN20
Easily ts them and
everyone in between
Everyone’s face is different. But with our new AirFit™20 series,
fitting a broad range of patients has never been easier. That’s because
each mask has been specially-designed to fit all patients regardless
of facial profile, taking the constant guesswork out of mask selection.
And with a recent international study showing the AirFit N20 fit
99% of patients,1you can trust that it will perform for your diverse
group of patients.

InfinitySeal™cushion
features specially-designed
loops and varying thickness
levels designed to prevent
blowout.
Magnetic clips
guide the headgear to the
frame quickly and easily.
Soft and flexible frame
sits underneath the eyes
and adapts to different
facial types, while its
integrated padding
provides added softness.
Quick-release elbow
makes it simple to
disconnect from the mask
tubing without removing
the mask.
Plush headgear
is specifically designed for
extra softness and stability.
Designed specifically for women.
AirFit N20 for Her
AirFit N20 highlights

AirFit N20 for Her headgear
with headgear clips
63558 (S)
AirFit N20 headgear
with headgear clips
63560 (S)
63561 (Std)
63562 (L)
Frame
AirFit N20
AirFit N20 for Her
Elbow with
short tube
Cushion
63550 (S)
63551 (M)
63552 (L)
Frame system (includes frame,
cushion and elbow with short tube)
63553 (S)
63555 (M)
63556 (L)
63554 for Her (S)
AirFit N20 components
Product codes
Complete mask systems (Includes frame system + headgear)
AirFit N20: Small 63503
AirFit N20: Medium 63501
AirFit N20: Large 63502
AirFit N20 for Her 63500
Headgear
The AirFit N20
t a remarkable 99%
of patients in a
recent international
tting study.
1

Nasal Mask
ResMed.com/AirFitN20
1
Fitting guide for AirFit N20
• Repeat step 4 with the lower straps.
• Reattach the fastening tabs.
• Start by ensuring the magnets on the
lower straps are unclipped.
• If they are clipped, detach them by twisting
and pulling them away from the frame.
• Pull the headgear over the head, making
sure the logo is facing outward.
• Position the lower straps so they both sit
below the ears.
• Bring each of the magnets up to meet their
corresponding clips on the frame.
• Adjust the fastening tabs on the upper
straps until the mask feels even and stable.
• Reattach the fastening tabs.
• Connect the device’s air tube to the
elbow, then click the elbow into the front
of the mask.
• Start the device.
Refer to the user guide for further instructions
and complete labeling information including
indications, contraindications, warnings
and precautions.
4 5 6
2 3
1 ResMed AirFit N20 internal international fitting study of new and existing CPAP patients, conducted Nov 2015.
Distributed by ResMed Corp, 9001 Spectrum Center Boulevard, San Diego, CA 92123 USA [phone] or 1 800 424 0737 (toll free). See ResMed.com for other ResMed locations worldwide. AirFit and InfinitySeal are trademarks and/or
registered trademarks of the ResMed family of companies. Specifications may change without notice. © 2016 ResMed Ltd. 1019410/2 2016-10
Incorrect
position Correct
position