Retevis RT36 User manual

RT36

1.Antenna
12.PTT
13.Lamp Key
2.Volume Up
3.Volume Down
9.MENU
10.Power Button
11.Speaker
14.Vox
15.Power display
16.Lock
17.Lamp
4.Channel Display
5.CTCSS/DCS
6.TX/RX Icon
7.Volume
8.Microphone
Number
01

Instructions for use
Specific recommendations:
1.To avoid the risk of burns, do not use the device
if the antenna is damaged in any way.
2.Do not use the device in a potentially explosive
environment.
3.Switch off the device if on an airlane or in a
hospital.
4.Never use the device in close proximity to a
radio to avoid interference.
5.Remove the batteries if the device is not in use
for an extended period of time. Never mix used
and new batteries.
6.Put the transmitter and antenna at least 5 cm
from your face.
7.Clean the device with a damp cloth. Do not use
of cleaning agents and solvents.
8.Do not modify the device in any way. If the
device is damaged, Please make it checked by
a qualified professional.
9.The device cannot be used to contact the
emergency services.
02

Unpacking and checking equipment
Welcome to use two-way radio. Carefully unpack
the radio. We recommend you check the listed in
the following table before discarding the package.
If any item is missing, please contact us
immediately.
2 x Belt clip
1 x Micro-USB
AAA
AAA
AAA
AAA
AAA
AAA
2 x two-way radio
User s Manual'
1 x User's Manual
Supplied accessories:
6 x (AAA) NiMH
rechargeable
03

AAA
AAA
AAA
AAA
AAA
AAA
04

1.Requires 6 AAA batteries included. Batteries
are to be changed by an adult.
2.Non-rechargeable batteries must be removed
from toy before being recharged and
rechargeable batteries shoud be charged under
adult supervision.
3.Do not mix alkaline, standard(carbon zinc),or
rechargeable(nickel cadmium) batteries. Do not
mix used and new batteries together. Only
batteries of the recommended type or of a similar
type should be used.
4.Batteries must be inserted according to the
correct polarity.Remove batteries from toy when
storing for an extended period of time or if
batteries are exhausted.
5.The supply terminals must not be short-circuited.
1.Battery Precautions
05

2.Product description
1.
2. Automatic squelch
3. Call tone (10 sets of call sounds to select )
4. Keyboard lock (long press key to lock the
keyboard misuse)
5.LED flashlight
6.7 kinds of LCD display
7. Low battery alarm
8.DCS 14,14 channels, each channel a digital
coded squelch
9. Vox function
Civilian handheld license-free two-way radio.
.
.
.
.
.
.
.
3.Functional operation
3.1
To turn the devices on or off, press the on/off
button for 3 seconds, there will be a BEEP sound
to confirm.
Turning the device on/off
10. Memory and restore factory settings function
11.Communication distance, according to the
actual situation around the mountains, trees,
tall buildings and other judgments Intercom
communication distance.
06

3.3 Function option switch
After pressing the power button to enter the
menu settings:
1.Changing the channel: press the button once,
then change the channel with and . Press
PTT to confirm .The two devices must use the
same channel
2.VOX:Press for VOX (voice)
to select, close and 5 level options.
3.P
▲ ▼
.
the button twice,
ress the button three times, then choose
one of the ten call tones and press PTT to confirm.
4.Press the button three times, return to
standby.
3.4 Vox function
Press the button twice, for VOX (voice) to
select, close and 5 level options.
Note: The volume level (8) is displayed on the
screen.
3.2 Adjusting the volume
To increase the volume, press the Up adjustor
button ▲and press the Down▼button to
decrease volume.
07

Note: 1. There will be a slight delay between
starting speech and radio transmission.
2. PTT auto-off when the voice-activated launch
switch is turned on does not need to be pressed
by PTT
3. After the end of the speech two seconds after
the launch automatically.
.
5 = High sensitivity under low background noise.
4 = Medium High Sensitivity Under Low
Background Noise Use.
3 = Sensitivity for most applications
2 = Medium low sensitivity for high background
noise.
1 = low sensitivity for high background noise.
3.5 CALL tone selection
Press the button three times, then
choose one of the ten call tones and press PTT
to confirm. a total of 10 kinds of CALL music,
press the power button to launch.
3.6 Battery Charge Level
The battery charge level is indicated by the
number of square spresent inside the battery
icon on the LCD screen.
08

Battery Full
Battery 2/3 charged
Battery 1/3 charged
Battery empty
When the battery power is low, the battery icon
will flash and there will be a beep indicating that
the batteries need to be replaced or recharged .
3.7 Memory function
There is a memory function (including the on /
off status) when the machine is turned off or off,
and there is no need to reset the channel
3.8 Restore factory settings
In the shutdown state, press the key and the
button at the same time, all settings are
restored to factory settings.
.
3.9 How to communicate with each other
Mutual communication must be set to the same
channel and sub-audio, the need to press the
PTT call key,Please keep the mouth and
distance of about 5 cm, two-way radio
09