RGBlink MSP 221 User manual

Interfaces 4
DVI Output
2Indicator
NOTE
5
HDMI Input
6
1 Power Interface
VGA Input
HDMI Input
USB Interface
Output Inteface
Operation Manual
3VGA Input
USB Interface
2VGA Output
1DVI Output
VGA Output
Program Area
Operation Manual
1. Power on, the 7 indicator light one by one, and then
all lights are off.
2. HDMI+COPY+ENTER:
Write external HDMI/DVI EDID into HDMI WRITE1;
3. HDMI+WRITE1+ENTER:
Write EDID of HDMI WRITE1 into HDMI/DVI IN;
4. HDMI+WRITE2+ENTER:
Write EDID of HDMI WRITE2 into HDMI/DVI IN;
5. VGA+COPY+ENTER:
Write external VGA EDID into VGA WRITE1.
6. VGA+WRITE1+ENTER:
Write EDID of VGA WRITE1 into VGA IN of other device.
(The EDID of VGA WRITE1 is RGBVGA which is
factory default;)
7. VGA+WRITE2+ENTER:
Write EDID of VGA WRITE2 into VGA IN of other device.
(The EDID of VGA WRITE2 is RGBVGA which is
factory default;)
8. EDID reset:
Press ENTER+WRITE2+WRITE1+COPY
+HDMI+VGA+COPY+WRITE1+WRITE2 in anticlockwise
to reset MSP 221 EDID.
MSP 221 –
This quick start provides basic instructions for an experienced
installer to set up and operate the MSP 221.
For full installation, configuration, and operation details, please refer to
the MSP 221 user manual, which is available at www.rgblink.com.
Interface Description
Input and Other Interface
IMPORTANT
Refertowww.rgblink.comfor the
complete user manualandinstallation
instructionsbefore connectingthe
producttothe power source.
Input the video signal from HD player,
DVD, and computer, etc.
Input the video signal from HD player,
DVD, set top box, computer, disk, etc.
Power indicator 2 lights when device has power supply.
LED indicator 5 lights when connect USB to computer.
Indicator
Power
Connect one end of the power adapter with the device,
the other end into a socket. Plug in, power indictor light
means the device works normally.
The device uses the standard 12V/3A power supply.
Used to control the computer and upgrade.
MSP 221 Quick Start
Version 2.0
Page 1
Address：S601-608 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: [phone] Fax:[phone]
Email: [email protected] http://www.rgblink.cn
Connect to the monitor or LED screen
which has DVI interface.
Can connect to the device with VGA
input or VGA monitor.

Back Panel Description
Functional Description Block Diagram
Input and Output Resolution
MSP 221 Quick Start
Version 1.0
Page 2 of 2
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: [phone] Fax:[phone]
Email: [email protected] http://www.rgblink.cn