RH Baby&child ALEXANDRA TUFTED TWIN BED User manual

ALEXANDRA TUFTED TWIN BED
PARTS INCLUDED
A [1] HEADBOARD
B [2] SIDE RAILS
C [1] FOOTBOARD
D [13] BED SLATS
NO. ITEM DESCRIPTION QTY.
1
2
3
4
5
Threaded Rod 8 pcs.
Curved Washer 8 pcs.
Lock Washer 8 pcs.
Wrench 1 pc.
Hex Nut 8 pcs.
FIGURE 1
ASSEMBLY INSTRUCTIONS:
1. Place the headboard (A) upright in the position you wish the bed to be in when fully assembled.
2. Secure the threaded rod (1) to the fixed nut in the headboard (A), footboard (C) simply turning it manually clockwise direction.
3. Raise the side rail (B) up and place the rod (1) to align with the bore holes on the end of the side rail (B). Put the side rail (B) up against the headboard
(A) so the threaded rods (1) go through the bore holes. Insert curved washer (2), lock washer (3) and place hex nuts (4) on threaded rod (1) then
tighten the hex nuts (4) with wrench (5), as illustrated in FIGURE 1.
4. Repeat the above procedure with the other side rail (B) to attach it to the headboard (A), and then repeat to connect side rails (B) to the footboard (C).
2
3
4
1
5
Round Head
Screw 26 pcs.
6
A
B
C
Fig. 1
Page 1 of 2

CARE INSTRUCTIONS
1. Dust often using a clean, soft, dry and lint-free cloth.
2. Blot spills immediately and wipe with a clean, damp, cloth.
3. We do not recommend the use of chemical cleansers, abrasives or furniture polish on our lacquered finish.
IMPORTANT SAFETY INSTRUCTIONS
1. Please read all instructions carefully before assembling.
2. For your safety, assembly by two or more adults is strongly recommended.
3. Keep instructions for future use.
4. Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural integrity of the item.
6
FIGURE 2
ALEXANDRA TUFTED TWIN BED
5. On inside surface of both side rails (B) was installed the support rail. Set individual bed slats (D) on both sides of the side rails (B). Use screw (5)
provided to fixed it. See FIGURE 2.
6. Assembly is complete.
Fig. 2
D
Page 2 of 2