RH Baby&child MARCELLE WIDE DRESSER TOPPER User manual

M A R C E L L E W I D E D R E S S E R T O P P E R - A S S E M B L Y I N S T R U C T I O N S
PARTS INCLUDED
A [1] DRESSER (SOLD SEPARATELY)
B [1] TOPPER
CAUTION
WHEN CHILD REACHES THE MAXIMUM WEIGHT OF 30 LBS,
THE CHANGING TABLE SHOULD NO LONGER BE USED.
ASSEMBLY INSTRUCTIONS
1. Gently place the topper [B] on top of the dresser [A]; The topper can
be placed in two different orientations depending on your intended
use. See Option "A" and 'B'.
2. Check the distance on both sides of the topper [B] to make sure it is
centered.
3. After checking the distance on both sides,make pilot holes using the
mending plates as a template at the back of the topper, attach the
mending plates [1] to the back of the topper [B] and the dresser [A]
using the provided screws [2]. See FIGURE 1.
TOOLS NEEDED
Phillips-head Screwdriver (Not included)
WARNING
* Adult assembly only due to the presence of small parts, sharp points and edges.
* FALL HAZARD - Falls can happen in an instant. To prevent death or serious
injury from halls, always keep children within arm's reach.
* Use this topper with the Marcelle Wide Dresser only.
* Read all instructions carefully before assembling.
* Do not use the changing system if it is damaged or broken.
* This changing system is intended for use with children weighing up to 30 lbs.
* Contour changing pad size is 32" W x 16" D x 4"H.
OPTION A OPTION B
B
A
HARDWARE INCLUDED
NO. SKETCH DESCRIPTION QTY.
2
1
SPECIFICATION
M4 x 12mm
51 x 38 x 2mm
Phillips-head Screws
Mending Plates
8 pcs.
2 pcs.
CARE INSTRUCTIONS
1. Dust often using a clean, soft, dry and lint-free cloth.
2. Blot spills immediately and wipe with a clean, damp cloth.
3. Do not use chemical cleaners, abrasives or furniture polish, as they may damage the finish.
IMPORTANT SAFETY INSTRUCTIONS
1. Please read all instructions carefully before
assembling.
2. For your safety, assembly by two or more adults is
strongly recommended.
3. Keep instructions for future use.
4. Use only vendor-supplied hardware to assemble.
Using unauthorized hardware could jeopardize the
structural integrity of the item.
1
2
FIGURE 1
11
/

12
/

22
/