RH Baby&child KEEGAN WIDE DRESSER User manual

KEEGAN WIDE DRESSER – ASSEMBLY INSTRUCTIONS
PARTS INCLUDED:
A [1] WIDE DRESSER
B [1] SUPPORT LEG
TOOLS NEEDED:
PHILLIPS-HEAD SCREWDRIVER (NOT INCLUDED)
1. Place the Wide Dresser (A) down on a flat and
smooth surface.
2. Attach the Support Leg (B) to the bottom of
the Wide Dresser (A) by inserting the exposed
screw of the Support Leg into the hole on the
bottom of the dresser and turning clockwise
until tight.
3. Carefully return the Wide Dresser to its upright
position.
page 1 of 2
ASSEMBLY INSTRUCTIONS: B
B
A
1
2
3
4
Metal Base 2 pcs.
2 pcs.
2 pcs.
Metal Plug
Phillips Screws M4x37 mm
5
2 pcs.
Phillips Screws M4x16 mm
1 pc.
Metal Cable
NO. ITEM DESCRIPTION QT Y.
YOUNG CHILDREN MAY BE INJURED BY TIPPING
FURNITURE. THE USE OF ANTI-TIPPING RESTRAINT
IS HIGHLY RECOMMENDED. WHEN PROPERLY
INSTALLED, THIS RESTRAINT COULD PROVIDE
PROTECTION AGAINST THE UNEXPECTED TIPPING
OF FURNITURE DUE TO SMALL TREMORS, BUMPS
OR CLIMBING. WE RECOMMEND
ATTACHMENT
TO A WALL STUD WHERE POSSIBLE OR
INSTALLATION BY A PROFESSIONAL WHEN
ATTACHING THE ANTI-TIP KIT TO MASONRY
OR CONCRETE WALL.
ANTI-TIPPING RESTRAINT:
THIS PRODUCT IS ONLY A DETERRENT. IT IS NOT A
SUBSTITUTE FOR PROPER ADULT SUPERVISION.
WARNING:

Can be adjusted
by using leveler.
page 2 of 2
KEEGAN WIDE DRESSER ANTI-TIP KIT – ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS:
1. ATTACH METAL BASE TO THE WIDE
DRESSER (A) AND THE WALL USING
THE SCREWS PROVIDED (3, 4).
2. PLACE THE TWO ENDS OF METAL
CABLE (5) IN THE MIDDLE OF METAL
BASE AND CONNECT THEM WITH
METAL PLUGS (2) THROUGH THE
HOLES IN THE METAL BASE AND
WIRE HEAD.
3. THE ADJUSTABLE LEVELERS
SHOULD BE USED WHEN THE
OBJECT IS PLACED ON AN
UNEVEN FLOOR.
WALL
4
2
2
1
1
5
5
3
WALL
CARE INSTRUCTIONS:
1. DUST OFTEN USING A CLEAN, SOFT, DRY LINT-FREE CLOTH.
2. BLOT SPILLS IMMEDIATELY AND WIPE WITH A CLEAN, DAMP CLOTH.
3. DO NOT USE CHEMICAL CLEANSERS, ABRASIVES OR FURNITURE POLISH ON THE LACQUERED FINISH.