RH Baby&child DRAKE QUEEN User manual

ASSEMBLY INSTRUCTIONS:
STEP 1:
Place the Headboard (A) upright in the
position you wish the bed to be in
when fully assembled. The Headboard
bed fast hardware should be facing the
inside, toward the mattress.
Secure the Threaded Rod (1) to the
Headboard (A). Raise the Side Rails (C)
up and place the rod into the Side Rails
(C) at the bore holes’ position, insert
Curved Slotted Washer (2) and tighten
Hex Nuts (3) using Wrench (4).
Repeat the procedure with the side rail
end and Footboard (B).
STEP 2:
Tighten the Support Legs (F) to the
bottom of Stretcher Bars (D).
.
TOOLS NEEDED:
Phillips-head Screwdriver (not included)
PARTS INCLUDED:
A [1]
B [1]
C [2]
D [3]
E [2]
F [3]
HEADBOARD PANEL
FOOTBOAR PANEL
SIDE RAILS
STRETCHER BARS
PLATFORM PANELS
SUPPORT LEGS
2
3
4
5
1
Curved Slotted Washer 8 pcs.
8 pcs.
1pc.
26 pcs.
Screw 8 x 30mm
Hex Nut 5/16” x 12mm
Allen Wrench 12mm
NO. ITEM DESCRIPTION QTY.
1Threaded Rod 5/16” x 3” 8 pcs.
C
C
2
4
A
B
F
D
3
DRAKE QUEEN / FULL BED INSTRUCTIONS
Page 1 of 2
Can be adjusted
by using Levelers.

CARE INSTRUCTIONS:
1. Dust often using a clean, soft, dry lint-free cloth.
2. Blot spills immediately, and wipe with a clean,
damp cloth.
3. We do not recommend the use of chemical
cleansers, abrasives or furniture polish on our
lacquered finish.
Page 2 of 2
20x
5
Phillips-head Screwdriver
(not included).
Phillips-head Screwdriver
(not included).
STEP 4:
Lay the Platform Panels (E) on top of the
Stretcher Bars (D) and attach using Qty.20
Screws (5) with Phillip-head Screwdriver.
E
E
DRAKE QUEEN / FULL BED INSTRUCTIONS
STEP 3:
Lay the Stretcher Bars (D) in between
the Side Rails (C), and attach using Qty.6
Screws (5) with Phillip-head Screwdriver.
C
D
C
5