RH Baby&child French Library Shelving User manual

123
1 1
1 1
2
2
3
3
French Library Shelving
PART LIST
A Side Panel 2 B Cross Bracing 1
C Angle Support 3 D Cast Handle 2
E Cast Leg 2 F Pipe 1
G Pin 2 H Angle Bracket 10
I Wooden Shelf 6 J Wrench 2
Two people are needed for assembly & set up of Shelving Unit. Assemble the shelving unit as
close to its final location possible. Once built, it is heavy & difficult to move.
Assemble the unit face-down on the ground. Place the two metal side panels on the ground,
same ends facing one direction and follow the steps as shown in picture :
STEP 1 : Remove the bolts from the back of panels, place the cross bracing to match the holes
and tighten the bolts with the wrench provided.
STEP 2 & 3 : Remove the bolts & place the angle supports on top and bottom of side panels
and re-tighten the bolts.
TOP
BOTTOM
A
B
C
baby&child
RESTORATION HARDWARE

4 5 6
4
4
6
5
5
Place the shelving unit on the floor with cross bracing facing
downwards.
STEP 4 : Remove the bolts from the top corners, insert the
angle supports & re-tighten the bolts back in place.
STEP 5 & 6 : Remove the nuts & place the set of cast legs at
bottom of unit & set of cast handles at center of unit & re-tighten
the nuts.
D
E

7
8
7
8
7
8
Using two people, tilt the shelving unit upright and move into place.
STEP 7 : Slide the pipe through the holes in cast legs.
STEP 8 : Place the pins through holes to lock the pipe in place
E
G

9
9
9
10
11
TOP SHELF
STEP 9 : Place the angle bracket on
cylindrical holes given on side panels
at desired level. Make sure both
brackets of a set are placed on same
level.
STEP 10 : Slide the 5 wooden shelves
onto the set of angle brackets installed
at various levels.
STEP 11 : Place the top shelf on the
top of shelving unit
Fill the shelves & Enjoy!
Thank you for your purchase.
rhbabyandchild.com
H
I