RH Baby&child 130 - 14 User manual

Page 1 of 6
1. Read all instructions before assembly crib. Keep instructions for future use.
2. Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
3. Infants can suffocate in gaps between crib sides and a mattress that is too small.
SLOANE TODDLER BED CONVERSION KIT
Made in Vietnam
Model No: 130 - 14
Distributed in the U.S.A by:
RH Baby&Child
2900 N MACARTHUR DRIVE
TRACY, CA 95376
www.rhbabyandchild.com
Distributed in Canada by:
RH Canada, Inc.
1500-1055 West Georgia Street
Vancouver, British Columbia
V6E4N7
WARNING: Read all
Instructions before assembling
this product.
KEEP INSTRUCTIONS FOR
FUTURE USE.
CUSTOMER SERVICE
If you are missing partsor have any questions about this product, contact us first. You can also order parts by writing to
the address above. Include the product model number, color, and a brief descriptionof the part.Or call 1-800-762-1751.
CARE AND CLEANING
TOOLS AND INSTALLATION
Tools needed: Key Wrench (included).
Two people are recommended for assembly.
When inserting bolts, turn clockwise until tight. Then loosen 1/2-3/4 of aturn. After bed is completely assembled,
return to each bolt and tighten.
DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning.If the crib is to be stored, store in a cool,
dry place and carefully package all original hardware to protect from loss.

Page 2 of 6
SLOANE TODDLER BED CONVERSION KIT
Infants have died in toddler beds from entrapment and strangulation.
Failure to follow these warnings and the assembly instructions could result in serious
injury or death.
NEVER use bed with children under 15 months.
NEVER place bed near windows where cords from blinds or drapes may strangle a child.
The mattress intended for use on the bed must be a full-size crib mattress having minimum dimensions
of 51 5/8 inches (1310mm) in length, 27 1/4 inches (690mm) in width and 4 inches (100mm) in
thickness, not exceeding 6 inches (152mm) in thickness.
If guardrails are used as the mattress containment means, guardrail(s) provided must be used to avoid
the formation of a gap between the mattress and the bed that could cause an entrapment.
DO NOT place bed near windows where cords from blinds or drapes may strangle a child.
DO NOT place items with a string, cord, or ribbon around a child's neck, such as hood strings or
pacifier cords.
A child using the toddler or day bed must be at least 15 months of age and must not weigh more than
50 lbs (22.7kg).
TO reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep,
unless otherwise advised by your physician.
TO help prevent strangulation tighten all fasteners. A child can trap parts of the body or clothing on
loose fasteners.
Cords. Do not suspend strings over a crib or attach strings to toys.
When child is able to pull to a standing position, set mattress to lowest position and remove bumper
pads, large toys and other objects that could server as steps for climbing out.
Stop using crib when child begins to climb out or reaches the height of 35 inches (89cm).
Check this product for damaged hardware, loose joints, loose bolts or other assembly and frequently
during use Securely tighten loose bolts and other fasteners. DO NOT use crib if any parts are missing,
damaged or broken. Contact(insert manufacturer’s name) for replacement parts and instructional
literature if needed.
DO NOT substitute parts.
If refinishing, use a non-toxic finish specified for children’s products.
Follow warnings on all products in a crib.
WARNING: ENTRAPMENT/STRANGULATION HAZARD

Page 3 of 6
PARTS INCLUDED:
G
[1] TODDLER RAIL
HARDWARE INCLUDED:
CRIB (SOLD SEPARATELY):
ASSEMBLY INSTRUCTIONS:
Note: - Bed must be assembled by at least two people.
- Please read instructions carefully before assembling bed.
- Use the above parts and fittings list to identify each component.
- Keep all packing materials until assembly is complete to avoid loss of smaller parts.
- Do not completely tighten all bolts until all steps are finished.
SLOANE TODDLER BED CONVERSION KIT
G
A
C
BD
E
F
E
A
B
C
D
E
F
[1]
[1]
[1]
[1]
[2]
[1]
HEADBOARD
FOOTBOARD
LEFT STATIONARY SIDE RAIL
RIGHT STATIONARY SIDE RAIL
STRETCHER BAR
MATTRESS SUPPORT
12
13
NO. ITEM DESCRIPTIONQTY.
Bolts 5/16" x 3/4"
1 piece
4 pieces
Allen Key 4mm

Page 4 of 6
SLOANE TODDLER BED CONVERSION KIT
STEP 1:
Remove Footboard (B) from the crib by carefully
unscrew and remove the 4 Medium Bolts (1)
with spring washer on the Footboard (B) using
Allen Key (13).
1
13
Note: If Mattress Support (F) is not in
the lowest position, then move scissor
assembly bars to the lowest position.
The mattress support is easily adjustable
to varying heights by loosening and
removing all the bolts from mattress
support of the current level and inserting
into a different hole for higher or lower
level.
STEP 2:
B
C
D
B
E
23
7
8
3
13
F
Highest level
Lowest level
Middle level
C, D

Page 5 of 6
SLOANE TODDLER BED CONVERSION KIT
STEP 3:
Loosen all tightened Bolts (1) from the
Left/Right Stationary Side Rails. Spread
front of crib open enough to insert Toddler
Rail (G) hooks between crib side frames.
Attach Toddler Rail (G) to side frame on
both ends by hooking into provided slots
while aligning stretcher bar.
If necessary, using a thick magazine or
book to protect the side rail, hammer
the hook-rail with a mallet or hammer
until tight.
G
G
E
13
1
C, D
C, D

Page 6 of 6
After crib is completely assembled,
return to each bolt and tighten to
snug fit.
DO NOT over tighten.
WARNING:
SLOANE TODDLER BED CONVERSION KIT
CARE INSTRUCTIONS:
1. DUST OFTEN USING A CLEAN, SOFT, DRY LINT- FREE CLOTH.
2. BLOT SPILLS IMMEDIATELY AND WIPE WITH A CLEAN, DAMP CLOTH.
3. DO NOT USE CHEMICAL CLEANSERS, ABRASIVES OR FURNITURE POLISH ON THE LACQUERED FINISH.
STEP 4:
Retighten all Bolts (1) to snug fit.
STEP 5:
C
D
C
D
13
1
When converting the crib to toddler
bed, the Short Bolts (12) should be
inserted in the upper holes of the
Left/Right Statonary Side Rails (C, D),
and tightened with the Allen Key (13).
13
12
C, D