RH Baby&child ASHBY UPHOLSTERED PLATFORM FULL BED User manual

Page 1 of 4
B
(1)
Insert the Threaded Rods (1) into the posts of the
Headboard (A) and Footboard (B).
PARTS INCLUDED:
A
B
C
D
E
F
TOOLS NEEDED:
Phillips-Head Screwdrive ( not included)
[1]
[1]
[2]
[3]
[3]
[2]
HEADBOARD
FOOTBOARD
SIDE RAILS
SLATS
CENTER LEGS
PLATFORM PANELS
1
2
3
4
Threaded Rod 5/16” x 3”
Hex Nut 5/16” x 12mm
8 pcs.
Screws 8 x 30 mm
Hex Wrench 12 mm
5
8 pcs.
24 pcs.
1 pc.
8 pcs.
NO. ITEM DESCRIPTION QT Y.
STEP 1:
ASSEMBLY INSTRUCTIONS:
Curved Slotted Washer 5/16”
A
ASHBY UPHOLSTERED PLATFORM FULL BED

Page 2 of 4
A/ B
STEP 2:
Slide the Side Rails (C) to the Headboard (A) and Footboard (B).
Insert Curved Slotted Washers (2), and Hex Nut (3), and tighten
with Hex Wrench (4).
STEP 3:
Tighten the Support Legs (E) to the bottom of the Slats (D).
(3)
(2)
(1)
(1)
(4)
C
C
C
B
A
D
D
E
E
Can be adjusted
by using Leveler.
ASHBY UPHOLSTERED PLATFORM FULL BED

D
(5)
C
STEP 4:
Lay the Slats (D) between the Side Rails (C),
then tighten using Screws (5) and Phillips-
head screwdriver (not included).
Phillips-head
screwdriver.
F
F
(5) Screw x 18 pcs.
Phillips-head
screwdriver.
Page 3 of 4
D
STEP 5:
Lay the Platform Panels (F) on top of the Slats (D) and
attach using Qty.18 Screws (5) with Phillips-Head
Screwdriver.
F
ASHBY UPHOLSTERED PLATFORM FULL BED

Page 4 of 4
CARE INSTRUCTIONS:
Dust often using a clean, soft, dry lint-free cloth.
Blot spills immediately, and wipe with a clean, damp cloth.
We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish.
ASHBY UPHOLSTERED PLATFORM FULL BED
STEP 6:
The adjustable levelers should be used when the object
is placed on an uneven floor.
Can be adjusted
by using Leveler.