RH Baby&child Beaumont Dresser User manual

12
/

22
/

B
A
B E A U M ON T D R E S S E R T O P P E R - A S S E M B L Y I N S T R U C T I ON S
ASSEMBLY INSTRUCTIONS
1. Gently place the topper [B] on top of the
dresser [A].
2. Check the distance on both sides of the
topper [B] to make sure it is centered.
3. After checking the distance on both sides,
make pilot holes using the mending plates as
a template at the back of the topper. Attach
the mending plates [1] to the back of the
topper [B] and the dresser [A] using the
provided screws [2]. See FIGURE 1.
WARNING
* Adult assembly only due to the presence of small parts, sharp points and edges.
* FALL HAZARD - Falls can happen in an instant. To prevent death or serious
injury from falls, always keep children within arm's reach.
* Use this topper with the Beaumont Dresser only.
* Read all instructions carefully before assembling.
* Do not use the changing system if it is damaged or broken.
* This changing system is intended for use with children weighing up to 30 lbs.
* Contour changing pad size is 32" W x 16" D x 4"H.
1
2
FIGURE 1
TOOLS NEEDED
Phillips-head Screwdriver (not included)
HARDWARE INCLUDED
NO. SKETCH DESCRIPTION QTY.
2
1
SPECIFICATION
M4 x 15mm
51 x 38 x 2mm
Phillips-head Screws
Mending Plates
8 pcs.
2 pcs.
PARTS
A [1] DRESSER (SOLD SEPARATELY)
B [1] TOPPER
CAUTION
WHEN CHILD REACHES THE MAXIMUM WEIGHT
OF 30 LBS, THE CHANGING TABLE SHOULD NO
LONGER BE USED.
CARE INSTRUCTIONS
1. Dust often using a clean, soft, dry and lint-free cloth.
2. Blot spills immediately and wipe with a clean, damp cloth.
3. Do not use chemical cleaners, abrasives or furniture polish,
as they may damage the finish.
IMPORTANT SAFETY INSTRUCTIONS
1. For your safety, assembly by two or more adults is strongly
recommended.
2. Keep instructions for future reference.
3. Use only vendor-supplied hardware to assemble. Using
unauthorized hardware could jeopardize the structural
integrity of the item.
12
/
1/1