RH Teen NILSSON TWIN BED User manual

PARTS INCLUDE
PARTS INCLUDED
ASSEMBLY I NSTRUCTIONS
Bed must be assembled by at least two people.
Please read instructions carefully before assembling bed.
Use the above parts and hardware list to identify each component.
Keep all packing materials until assembly is complete to avoid loss of smaller parts
1 of 2
Screw(4cm)
Screw(3cm)
Allen Key(0.5cm)
16 pcs.
1
2
3
4
NO. ITEM DESCRIPTIONQTY NO. ITEM DESCRIPTIONQTY
4 pcs
4 pcs
4 pcs
4 pcs
Thread Rod(0.8cm Dia)
1 pc
Lock Washer
Spanner Wrench
Curvead Washer
Nut
5
6
7
8
NILSSON TWIN BED - ASSEMBLY INSTRUCTIONS
1.
Stand the Headbaord(A) upright, attach the Side Rails (C) into the Headboard(A),do not tighten the
2.
Lock the Footboard (C) & Side Rail (B) with Thread Rod (4), Curved Washers (5), Lock Washers (6) and Nuts (7),
3.
.
Place the Slats (D) on the top of the Side Rail's (B) side slate and fasten using Screw (2), as shown in
4.
then tighten with Spanner Wrench (8), as shown in Diagram II.
Lay the Platform (E) on the top of the side slates then tighten the screw (3), as shown in Diagram IV.
Diagram III.
Allen Head Bolts (3) until the bed is fully assembled, as shown in Diagram ÿI.
A. HEADBOARD (1)
B. SIDE RAILS (2)
C. FOOTBOARD (1)
D. SLATS (4)
E. PLATEFORM PANELS (2)
1 pc
8 pcs
Phillips------ Head Screwdriver (not included)

2 of 2
Diagram III
A
BC
Diagram IV
E
Diagram I
①
A
B
D
③
B
Diagram II
B
C
8
7
6
5
4
2