RH Teen NILSSON STORAGE TWIN BED User manual

PA R TS I N C LUDED
AS SEMB LY INSTRUCT IONS
CARE INS T RUCT ION S
TOOLS NEE DED
1. Spot clean only with a soft, damp cloth.
1 of 2
Bed must be assembled by at least two people.
Please read instructions carefully before assembling bed.
Use the above parts and hardware list to identify each component.
Keep all packing materials until assembly is complete to avoid loss of smaller parts.
4. Lay the Platform Panels (D) flat on the top of the Drawer Framing (B) and slats of Side Rails (C), as shown in Diagram V.
NO.
QTY
1
2
ITEM
DESCRIPTION
Allen Key(0.5cm)
Allen Head Bolt(0.8cm Dia*5.5cm) 2 pcs.
NILSSON STORAGE TWIN BED
1. Stand the Headbaord(A) upright, attach the Side Rails (C) into the Headboard(A),do not tighten the Allen Head Bolts (3)
until the bed is fully assembled, as shown in Diagram ÿI.
2. Hook the Drawer Framing (B) into Side Panels , as shown in Diagram ll.
3. Fasten the Drawer Frame and the Side Rails(C) with Allen Head Bolt (2) with Allen Key (1), one for the Left Side Rail, one
for the Right Side Rail, as shown in Diagram III.
A.HEADBOARD (1)
B.DRAWER FRAME (1)
C.SIDE RAILS (2)
D.PLATFORM PANELS (2)
Phillips------ Head Screwdriver (not included)
1 pc.

2 of 2
A
B
C
D
Diagram I
Diagram II
A
①
B
C
②
Diagram VI
A
B
C
Diagram III
C
B
①