RH Teen PAOLA CLASSIC User manual

A [ 1 ] HEADBOARD
B [ 1 ] FOOTBOARD
C [ 2 ] SIDE RAIL
D [ 2 ]
E [ 6 ] SLAT
ASSEMB LY I N S T RUCTION S
Bed must be assembled by at least two people.
Please read instructions carefully before assembling bed.
Use the above parts and hardware list to identify each component.
Keep all packing materials until assembly is complete to avoid loss of smaller parts
1 of 2
1.
2.
3.
4.
5.
PARTS INCLUDED
TOOLS NEEDED
PAOLA CLASSIC UPHOLSTERED METAL BED - ASSEMBLY INSTRUCTIONS
6.
G [ 2 ] PLATFORM PANEL
MATAL PLINTH
F [ 1 ] CENTER SUPPORT METAL SLAT
Hook the Side Rail (C) into the Headboard (A) by using Allen Key (2), then tighten the Flat Head Bolt (5)
by using Allen Key (1), as shown in Diagram I.
Attach the Metal Plinth (D) to the Headboard (A) and tighten it by using Allen Key (1), as shown in Diagram II.
Repeat above procedure to attach the Footboard (B) to the Side Rail (C), as shown in Diagram II & Diagram III.
Hook the Center Support Metal Slat (F) into the Headboard (A) and Footboard (B), as shown in Diagram IV.
Place the Slats (E) on the top of the Side Rail’s side slats and fasten using Screw (4), as shown in Diagram V.
Lay the Platform Panel (G) on the top of the Slat (E) then tighten the Scerw (3), as shown in Diagram VI.
TWIN
Philips-head Screwdriver ( not included)
CARE INSTRUCTIONS
Spot clean only with a soft, damp cloth.

2 of 2