RH WYETH SPLIT BAMBOO FLOATING PLATFORM User manual

WYETH SPLIT BAMBOO FLOATING PLATFORM BED INSTRUCTIONS
PARTS INCLUDED
A [1] HEADBOARD
B [1] FOOTBOARD
C [2] MATTRESS FRAME PART #1
D [1] MATTRESS FRAME PART #2
E [2] MIDDLE LEG
F [3] SLAT PANEL
ASSEMBLY INSTRUCTIONS
1. Unpack all parts and place them on a protected work surface.
2. Attach the middle legs to the mattress frames part #1.
3. Attach the mattress frames part #1 into headboard (A) and
footboard (B) by using bolt (1), spring washer (2), flat washer (3) and
wrench (4). Fully tighten all bolts.
4. Fit the mattress frame part #2 into the free end of the mattress
frame part #1; attach using bolt (1), spring washer (2), flat washer (3)
and wrench (4). Fully tighten all bolts.
5. Insert slat panels into the mattress frame.
6. Assembly is complete.
A
CARE INSTRUCTIONS
1. To clean, use a soft, dry or damp cloth.
2. Do not use any abrasive cleansers.
IMPORTANT SAFETY INSTRUCTIONS
NO. ITEM
1

2
@
3
@
4

1. Professional installation is strongly recommended.
2. For your safety, it is recommended that more than two adults assemble.
3. These instructions are provided for your safety. It is important that they are read carefully and completely before installation.
QTY
16 pcs.
16 pcs.
16 pcs.
DESCRIPTION
Stainless Steel Bolt
M8 x 60
Spring Washer MS
Flat Washer
Wrench M13 1 pc.
Page 1 of 2
RH
10/1/18
HARDWARE INCLUDED




 
COMPLETE
 


7
         
Wyeth - Page 2 of 2
10/1/18