Ricoh Acifio MP C3002 Operating instructions

How to use Ricoh Acifio MP C3002
1. Copy
a. Press the [Home] key on the top left of the control panel, and press the [Copier] icon on
the [Home] screen.
b. Make sure no previous settings remain.
When there are previous settings remaining, press the [Reset] key.
c. Place the originals.
d. Make desired settings.
e. Enter the number of copies with the number keys.
The maximum copy quantity that can be entered is 999.
f. Press the [Start] key.
g. When the copy job is finished, press the [Reset] key to clear the settings.
[Start] key

2. Scan to Email
a. Press the [Home] key on the top left of the control panel, and press the [Scanner] icon on the
[Home] screen.
b. Make sure that no previous settings remain.
If a previous setting remains, press the [Reset] key.
c. Press the [E-mail] tab.
d. Place originals.
If necessary, specify the scan settings according to the original to be scanned.

e. Specify the destination. Press [Manual Entry] to input an Email address.
f. To specify the e-mail sender, press [Sender Name].
g. Press the [Start] key.

3. Scan to USB stick
a. Plug your USB stick on the right side of the control panel.
b. Press the [Home] key on the top left of the control panel, and press the [Scanner] icon on the
[Home] screen.
c. Make sure that no previous settings remain.
If a previous setting remains, press the [Reset] key.
d. Place originals.
e. Specifying the File Type by pressing [Send File Type / Name].

f. Press [Store File] and [Store to memory device].
g. Press the [Start] key.

4. Print from USB stick
a. Press the [Home] key on the top left of the control panel, and press the [Printer] icon on
the [Home] screen.
b. Press [Print from Memory Storage Device]
c. Select a file and start printing.