Riester ri-fox N User manual

ri-fox N
Pulse OximeterPulse Oximeter
ORDERING INFORMATION
APPEARANCE
1905 ri-fox N Pulse Oximeter
Quick Start GuideQuick Start Guide
%
SpO
2
PR BPM
Battery caseBattery case
Power switchPower switch
Display screenDisplay screen
%
SpO
2
PR BPM
DISPLAY SCREEN
Pulse Bar graphPulse Bar graph
Pulse RatePulse Rate
Oxygen SaturationOxygen Saturation
Battery low indicatorBattery low indicator
Please visitPlease visit riester.deriester.de for more informationfor more information

USING THE DEVICE
STEP 1. Install two AAA batteries into the battery
cassette, and press the button down along the arrow
and push the battery cover. Then close its cover.
STEP 2. Open the clamp.
STEP 3. Insert one nger, ideally the index nger, into
the opening of the pulse oximeter, please ensure that
the patient’s nail is facing upwards.
STEP 4. Press the power switch once on the front
panel.
STEP 5. The patient’s nger should remain still
while the pulse oximeter is working.
%
SpO
2
PR BPM
STEP 6. After 2+ seconds, read the measurements
from the display screen.
%
SpO
2
PR BPM
99279 Rev. A 2023-01-23
Rudolf Riester GmbH P.O. Box 35 | Bruckstraße 31 | 72417 Jungingen | Germany
Tel.: [phone] | Fax.: [phone] | [e-mail] | www.riester.de
Refer to instructions for use for full functional usage
Please visitPlease visit riester.deriester.de for more informationfor more information
VITAL SIGNS DEVICES