Rightline Gear 100J72 User manual

Rightline Gear Trunk Storage Bag
Installation Guide for Jeep Wrangler '07-'16 2-Door JK
Installation Time: 1 Hour
Tools Required:
Box Cutter/Knife
Installation Instructions:
1. Carefully open the package using a box cutter or knife (Figure A) and ensure the bag, inserts and straps are
included and undamaged.
Figure A
2. Slide the hard-plastic insert (included) into the top sleeve (Figure B).

Figure B
3. Secure the two hard plastic shelves (included) onto the horizontal dividers by aligning the Velcro strips (Figure
C).
Figure C
4. Close the zippers (Figure D) and reconnect Velcro.

Figure D
5. Place the storage bag behind the rear seat (Figure E).
Figure E

6. Run the two rear clasps through the matching attachment rings on the bottom of the rear seat (Figure F).
Figure F
7. Run the straps through the clasp to hold in place (Figure G).
Figure G
8. Run the top left and top right straps around the rear vertical roll bars above the seat belt holders on each side
(do not twist straps) (Figure H).

Figure H
9. Buckle the straps in place (Figure I).
Figure I
10. Run the two shorter inner straps around the headrests on each side (do not twist straps) (Figure J).

Figure J
11. Buckle the straps in place (Figure K).

Figure K
12. Tighten all straps down. Optional: Fill the bag compartments completely to help displace the wrinkles created by
the shipping package.

Before
After
Installation Instructions Written by ExtremeTerrain Customer J. Sandlin 11/10/2017