Rimage Amigo II User manual

Amigo II Specifications
Item Description
Standard System One disc recorder, Rimage Amigo II autoloader, Everest printer or PrismPlus
printer, and software.
Software requirements Rimage Producer Software
Input bin capacity 300 Discs
Output capacity 300 Discs
Physical size Width – 15.75 inches (40.6 cm)
Height – 22.5 inches (57 cm)
Depth – 24.5 inches (62.3 cm)
Weight:
•95 lbs (43.2 kg) with Everest printer
•71 lbs (32.3 kg) with PrismPlus printer
Minimum PC requirements
If you do not understand these
requirements, ask your computer
technician for help or refer to your
PC documentation.
Processor: Celeron, 2.0 GHz
RAM/Memory: 512MB, DDR-200
Fixed Storage: 2 GB of free space
Graphics: 1024 x 768, 16-bit color
FireWire/USB 2.0 Card included with system.
*Optimum PC requirements
These PC specifications are
recommended if you are using
the Rimage Amigo II to record
DVDs.
*Throughput is based on this
system configuration. For
optimum performance, use a PC
with these specifications.
Processor: Pentium 4, 2.8 GHz, 400 MHz Front Side Bus
RAM/Memory: 512MB, DDR-400
Fixed Storage: Two 36 GB, 10,000 RPM Serial ATA Hard drives:
•Drive one is used to house the operating system and the Rimage System
Folder.
•Drive two is used for caching. Format drive as Basic Disk, NTFS.
Graphics: 1024X768, 32-bit High Color
FireWire/USB 2.0 Card included with system.
Supported Operating
Systems Windows 2000 SP4, Windows XP SP1 or SP2, Windows 2003
Power 100 – 240 VAC, 4.7 – 2.3 Amps, 60/50 Hz
Operating Temperature 60°to 95°F (16°to 35°C)
Humidity 40 to 80% non-condensing
Storage Temperature 5°to 95°F (-15°to 35°C)
5/17/2007 1