ring Smart Lightbulb User manual

•
Smart Lightbulb
Dimmable Neutral White A 19 LED Bulb

This device is not intended
for use with emergency exit
fixtures or emergency lights.
Before replacing, turn off
power and let the bulb cool to
avoid electrical shock or burn.
Dispose of this device in
accordance with disposal laws
•
1n your area.

This device is not a toy
designed to be played with
by children.
Do not place the device on
hot surfaces.
For safety reasons, do not
open devices, which will also
void the warranty.

LhwARN1NG WARNING: Risk of
1,.\,-'-'t electrical shock. Do
not attempt to open or
disassemble the bulb.
Not suitable for use with
standard wall dimmers.
Suitable for damp locations. Do
not use where directly exposed
to water.

Choose a location.
Determine where you would
like to install your A19 bulb.
If your desired socket is hard
to reach, you can set up
your new bulb in an easily
accessible socket. Once
setup is complete, you can
move it to your desired
location.

Not compatible with photo
sensors, motion sensors or
timers unless specifically
designed for Ring Smart
Lighting.
OPERATING INSTRUCTIONS:
Use the bulb only in a socket
rated for this bulb.

Turn off the power.
Before you continue, make
sure you turn off power to
the I ig ht fixture.
Remove the old
bulb.
Turn counterclockwise to
remove it from the socket.

Set up your Ring
Bridge.
The Bridge is required to
connect your Ring Smart
Lights to the Ring app and
other compatible
Ring devices.

To set up your Bridge,
follow the instructions in
the Ring app or the Bridge
user manual.
-
-

Download the
Ring app.
The app walks you through
setting up and managing
your Ring Smart Lightbulb.

Search for ''Ring'' in one of
these app stores, or visit:
ring.com/app
, Download on the
App Store
GET IT ON
Google play

When prompted, select
Smart Lighting and follow
the in-app instructions to
install your Smartbulb.
You'll need to restore
power to the bulb so it
can connect to the Bridge
during setup.

You will then be able to
control your light directly
from the Ring app where
you can set schedules and
link your bulbs to other
devices.

Set up your A19 in
the Ring app.
In the app, tap Set Up a
Device.

You1re all set!
Once your
bulb is set up,
don't forget to
keep your light
switch ON.

For help, visit: ring.com/help
Or give us a call...
US18006561918
Canada 1 855 300 7289
Worldwide [phone]
For all our customer support
numbers, visit: ring.com/callus
© 2019 Ring LLC or its affiliates .
Ring and all related logos are trademarks of Ring LLC or its affiliates.

1 523 26th St.
Santa Monica
1 CA
90404
Model: Ring Smart l19htbulb (A 19)
IMPORTANTPRODUCTINFORMATION
Safety and Compliance Information
Use Responsibly.Read all 1ns1ruc11ons and safety information before use
SAFEtv INFORMATION
& FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE. ELECTRIC SHOCK, OR OTHER
INJURY OR DAMAGE
Small parts may pose choking hazards Keep device and box contents out of reach of children.
Turn off power before 1nspect1on,Installation, or removal. Ensure that voltage of the bulb is compatible
with the mains electricity of your country before connect,ng to a bulb holder. Do not force bulb base onto
incompatible bulb holder. Not intended for use 1n emergency light f1Ktures or exit signs.
Your bulb can withstand outdoor use In an enclosed fixture.However, your bulb 1s not intended for underwat.,r
usewhere it will be dir_euly exposed to water To protect against_ electricshoe~, do not intentionaJly submerge
or immerse your bulb on water or expose your bulb to other l>qu1ds. Do not spill anr. food or beverageso~ your
bulb. Do not attempt to clean or polish your bulb w,th or expos~ your dev1ce to 01, lot10n, or other abrasive
substances. Do notexposeyour bulb directly to water, or extremely humid conditions(such as a steam room).
Oo not attempt to dry your bulb with an external htat $Ovrce, such as a microwave oven or a hair dryer If your
bulb appears to be damaged, d1Scont1nue use1mmed1ately,
WARNING: Risk of Electric Shock. Do not attempt to open or disassemble the bulb. Oo not U$e wheredirectly
exposed to water
Not suitablefor use with standard wall dimmers. This device is not intended foruse with emergency exit
fixtures or emergency lights. Switch off _the power supply to the socket and allowsufficient time for the bulb
to cool before removing the bulb from filling Use the bulb only on a socketrated for 1h15 bulb._ D1Spose of this
device in ~ccordance with di~posallaws 1n your area Not compatible with photo sensors. motion sensors or
timers unless <pec'ficallydesigned for Ring Smartl1ght1ng
Product Specifications
Model Number SAT1S3
Electrical rating: 120VAC, 75mA, 8.SW, 60H,
Operating cond1t1ons .4·f lo 104.F (-2o·c to 40'C)
Recycling YourOevice Properly
In some areas. the disposal of certain electronicdevices 1s regulated Makesureyou dlSpose of, or recycle, your
device 1n accordance with your local laws and regulations For 1nforma11on about recycling your device. go to
www.amazon.com/devicesupport.
ForCanadianCustomers
Innovation, Science and Economic Development Canada(ISEO)Compliance
Th,s dev1c~ containslocense•e,.,mpttransm1tter(s)/rece1ver(s) that comply with Innovation,Science and. .
Economic Development Canada's license-exempt RSS(s). Operation 1s subject to the following two conditions
(1) th,sdevice may not cause interference.and (2) this dw1ce must accept any interference, including
1nterferenc@ that may caus!I undesired operation or th~ device
Conform,te Innovation Sciences et Oeveloppement ~conomlque canada (ISOE)
t:em.. tteur/ ·ect!pteur exempt de licence contenu cans le presentappare1I est Conformeaux CNR d'lnnovauon,
Sciences et Developpement economique Canadaapplicablesauxappare1ls radio exemp1s de licence,
L'exploitat,on est autorisee aux deu• cond1t10ns su1vantes · (1) l'appare1I nedo1t_pas produire de brou1llage,
et (2) l'utilisateur de l'appare1I dolt accepter tout brou,llagerad10electnquesub,, m6me sl le brou,llage est
susceptible d'en comprometlre le fonctionnem~nt.
Caution:Anychanges or mod1fica11ons to thisdevice not exphc1tly approved by manufacturer could void your
authority to operate this equipn"lent.
Information Regarding Exposure to RadioFrequency Energy
This equipment compiles with IC RSS-102 RF exposure ltm1ls set forth for an uncontrolled environment.
Renseignementsrelatifsal'expos1t1on al'energiedesrad1ofrequences:
Cet equ1pement est conforme aux lim1tesd'exposition IC CNR• 102 prevues pour desenvironnements non
controles
This equipment should be installed and operated withm1n1mum distance 20 cm between the radiator and
your body,
Cet equipement doit etre installe et ut11tse avec un minimum de 20 cm de distance entrelasource de
rayonnement et votre corps ,
CAN ICES·3 (8)/NM8 3(8)

For UnitedSlltes Customers
This dev1c~ compliesw,th Part 1S of the FCC Rules. Operation issub! ' eu to the loll owing two
conditions (1) thisdevice may not cause harmful interference, and 2) thisdevice- must accept any
interference r.,ce1ved, including interference that maycause undesiredoperation
The party responsible for FCC compliance IsRing, LLC 1523 26th StSantaMonica,CA 90404USA
Foradditiona1 help, v1s1l : ring.com/help
Or giveusa call:
us+ 1800656 1918
Canada·+I 855 3007289
Worldwide~ I 310929 708S
For a ltst of all our customer support numbers, v1s1t ring.com/callus
Changes or modifications to this unit not expressly approved by the party respons,ble lor
compliance could void the user's authority to operate the equIpment. lnformat1on on thisdevoce IS
on file with the FCC and can be found by lnputung the dev1c~·s FCC ID into the FCC: 10 S~;irth form
avaJlable at https:/ /www.fcc.gov/oetiealfcetd
The output power of the radio technology used in the Products. 1s below the radio, fr1>quency
ex posure hm1ts set by the FCC. N"vertheless, It Is adv1Sed to use the Products In sucha manner
that minimizes the potential for human contact during normal operation This device should be
installed and operated with at least 20 cm between the radiator and your body.
General
NOTE This equipment has been tested and found to comply with the limits for aClass 8 digital
device,pursuant to Part 1S of the FCC Rules These 11m1ts are designed to provide reasonable
protection against harmful 1nterfer,ence Inaresident,al installation.This equipment generates,
uses and canradiate radio frequency energyand, 1f not installed and used ,naccordance with the
instructtons, may cause harmful interference to radio communications.
However, thereis no guarantee that Interference wlil not occur In a parttcular installation. If
this equipment does cause harmful mterfereoce to radio or television reception, wh,ch can be
determined by turning the equipment off and on, the user Is encouraged to try 10 correct the
interference by one or more of the following measures·
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver Is
connected.
Consult the dealer or anexperienced radio/TVtechnician for help.
Cauuon: Any changes or modifications to th<s device not expllc,tlyapproved by manufacturer
could void your authority to operate this equipment
Use of the product is subject to your registration with Ring and your agreement with the Terms of
Service found at www.ring.com/terms
To rev~e.w your warranty coverage, please v,s1t www.r,ng.com/warranty
Cl 2019 Ring LLC or I1s afftltates
Ring, Always Home, and all related logos aretrademarks of Ring LLC or its affiliates

1. Download the Ring app.
Open the aRP, tap Set Up a Device,
then select Smart Lights.
2. Scan this code.
This identifies your
Ring to make setup
fast and easy.
© 2019 Ring LLC or its affiliates .
Ring
and all related logos are trademarks of Ring LLC or its affiliates.