Rio Salon Laser LAHRC3000 User manual

C O N T E N T S
English.. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .Page 2
Français... .. .. .. .. .. .. .. .. .. .. .. .. .Page 14
Deutsch . .. .. .. .. .. .. .. .. .. .. .. .. .. Seite 26
Nederlands.. .. .. .. .. .. .. .. .. .. .. Pagina 38
1-IN-LAHS-HAIR-EFGD/1.1

Dear Customer,
Congratulations on your purchase. Laser hair treatment gives a long term solution to
permanent hair reduction. Treating hairs to kill the hair root permanently has a high
success rate, giving lasting results. By treating yourself at home you will be saving
yourself a series of expensive trips to the salon. Laser treatment by its very nature is
relatively slow compared to temporary methods of hair removal, but the time
invested is more than justified by the permanent results. Understanding the process
and in particular the hair growth cycle is important. This guide will help you to achieve
the hair reduction you are looking for, so please read it carefully.
If you have any questions or suggestions please call our customer care representatives
on 01242 702345. They will be delighted to help you get the best results from your
Salon Laser Scanning air Remover.

3
Not suitable for Afro-Caribbean or black skin complexions. Not suitable for Grey air.
Laser hair removal should not cause discomfort. If you feel any discomfort or soreness the setting may be too high or your skin tone
(colour) is not suitable for use with this product.
Do NOT treat the following areas: Tattoos, permanent make-up, pimples, warts, hair grown on black spots, skin disease, birth marks,
burns, lips, nipples, genital or anal areas, eczema, eyelashes, eyebrows, near the eyes, nasal or ear hair.
Do NOT treat the same hair/area repeatedly in any one session.
Inbuilt safety features protect the eye being exposed to the laser, however, never aim the Wand at or near eyes.
Do NOT use after drinking alcohol or if you are feeling unwell or fatigued.
Do NOT use near flammable materials.
Reflection azard: Please remove all jewellery in vicinity of the treatment area before use.
Keep the product out of reach of children and pets. When not in use, store the key responsibly in a safe place away from children.
Misuse of the unit can cause harm.
Do NOT override any safety features or open the unit.
W A R N I N G S

4
Enter the security button sequence by pressing the buttons (highlighted in black) in the following order:
If the sequence is entered correctly the unit will emit 2 beeps and the keyswitch will stop flashing and light green. The lowest power level
will light blue and the SCAN and SINGLE buttons will both flash blue ready for selection.
Note: There is a 60 second time imit for entering the code. The unit wi power off if the code is incorrect y entered or if you have
exceeded the 60 second imit (the keyswitch wi change from f ashing green to f ashing orange and the unit wi emit two ow beeps).
Turn the key off, wait a few seconds and then turn the key back on and re-enter the button sequence.
S E C U R I T Y B U T T O N S E Q U E N C E
1234

5
O W D O L A S E R S W O R K ?
Lasers deliver an intense beam of light which are made up of a single wavelength or colour. Skin is essentially transparent to light in the wavelength
range of 600-1100nm (nano meters), while melanin containing structures will absorb laser energy of this wavelength. It is therefore possible to
target the hair follicle which has a concentration of melanin without affecting the surrounding area.
The light energy absorbed by the melanin pigment results in the rapid heating up of the hair follicle. This heat destroys the cells (papilla) responsible
for hair growth. If adequate heating is achieved, then the follicle is permanently disabled resulting in a permanent reduction in hair growth.
S U I T A B L E S K I N T Y P E S
Melanin in the epidermis also absorbs the energy and limits the depth of penetration of the laser light into the skin. Using a light wavelength
of 808nm enables treatment of relatively dark skin as well as fair-skin types. owever, laser hair treatment is not suitable for Afro-Caribbean
or black skin complexions. Laser treatment is also ineffective in removal of white or grey hair. Electrolysis should be considered as an
alternative treatment.
As a guide, skin colours are classified by the Fitzpatrick skin phototypes as described in the table opposite.

6
24 hours before treatment check for any reaction by
testing a few areas of hair.
The + and - buttons increase or reduce power levels.
Treat several areas of hair on each Power Level up to the
maximum Power Level for your skin type (see table). If
you feel any discomfort, the previous lower power level
is the maximum power level you should use.
A slight redness after treatment may occur. Any localised
redness after treatment is caused by the destruction of
the hair follicles and is quite normal. owever, if any
redness remains after 24 hours this would indicate the
power level selected was too high for your skin type.
Use the next power level down during treatment.
PLEASE NOTE: Skin colour varies on different areas of
the body - you may find that you need different power
level settings for different areas. Each area should be
tested for the appropriate maximum power level.
P A T C T E S T
Skin
Type Skin Colour
Tanning History Maximum Power evel
I
Very fair,
"transparent"
Always burns, never tans
All laser
power levels
should be
suitable.
II
Fair
Always burns, tans with
difficulty
III
Fair to light olive Burns mildly, tans slowly
IV
Olive to brown
Rarely burns, tans with
ease
Up to level 3
V
Dark brown
Very rarely burns, tans
very easily
NOT
suitable for
aser Hair
Removal
VI
Black
Never burns, tans very
easily

T E A I R G R O W T C Y C L E
Catagen
Anagen
Growing Phase Involution Phase Resting Phase New Growing Phase
AnagenTelogen
Regrowing Phase
Early to mid Anagen
It is important to understand the normal hair growth cycle to understand how the Salon Laser Scanning air Remover works. The hair follicle
is an anatomical structure which evolved to produce and push out a hair shaft. air is made up of proteins called keratins. uman hair grows
in a continuous cyclic pattern of growth and rest known as the "hair growth cycle."
The Cycle
Three phases of the cycle exist:
Anagen = active growth phase Catagen = degradation phase Telogen = resting phase
Periods of growth (anagen) between two and seven years, are followed by a period in which the follicle is totally degraded. The resting phase
(telogen) then begins and lasts between six weeks and six months. Shedding of the hair occurs only after the next growth cycle (anagen) begins,
and a new hair shaft begins to emerge. On average 50–100 telogen hairs are shed every day. This is normal hair loss and accounts for the hair
loss seen every day in the shower and with hair combing. These hairs will regrow. The percentage of follicles in the resting phase (telogen) will
vary at any time depending on the body area. It is also important to note that a variety of factors can affect the hair growth cycle and cause
temporary or permanent hair loss (alopecia) including medication, radiation, chemotherapy, exposure to chemicals, hormonal and nutritional
factors, thyroid disease, generalised or local skin disease, and stress.

8
Everyone's hair grows differently, depending on age, weight, metabolism, hormones, ethnicity, medications, and other factors. But all hair goes
through three distinct growth phases:
Active growth phase (called the anagen phase), which lasts between 2 and 7 years. During this phase the dermal papilla actively produces
cells which form the hairshaft. In certain areas of the body, such as the scalp, the majority (83%) of the hairs are in this phase. During the Anagen
phase the hair has an abundance of melanin.
Degradation phase (catagen phase), which lasts between 10 and 20 days, during which the hair stops growing but is not yet shed. About
3–4% of our body hair is in this phase at any given time. The hair follicle shrinks at this time as the hair is prepared for eviction.
Resting phase (telogen phase), which can last for several months, during which the hair falls out and a new hair begins to form.
The hair follicle is not treatable during this time.
Laser treatment is only effective when the hair is in the active growth phase. airs or hair follicles in the Degradation or Resting phase need
to progress to the active phase before treatment will be beneficial. Therefore
multiple treatments are required for long term permanent hair reduction.
Also in a single treatment not all of the hair follicles in the active phase will be
destroyed. Some follicles are destroyed, others may be miniaturised into vellus hairs
(light fine hairs), and some enter prolonged dormancy. The initial treatment should
be repeated to take care of active hair follicles that were not effectively treated in the
first session as new hair growth is observed, this will typically be some 3–4 weeks
later depending on where the treatment area is.
Further treatments should be planned at regular intervals to treat hairs that are
coming out of the resting phase and into the active growth phase. Generally, we
recommend 6 treatment sessions over 6 months. Given the number of hair follicles
in the resting phase at any given time this hair re-growth can be significant.
Any follicles without a target hair within will simply grow again and will need to be
treated next time around.
Body Site
Follicle
Density
per square cm
Resting
Phase
Time in
Resting
Place
Active
Growth
ead 350 15% 3 months 83%
Arms 80 18% 5 months 79%
Legs 60 18% 6 months 79%
Beard 500 68% 10 weeks 30%
Upper Lip 350 64% 6 weeks 34%
Armpit 65 28% 3 months 69%
Chest/Back 70 28% 3 months 69%
Pubic 70 25% 3 months 71%
W Y I S A S E R I E S O F T R E A T M E N T S R E Q U I R E D ?

9
How should I prepare my skin for laser hair removal?
Laser hair removal does not require any special skin preparations, although you should always ensure your skin is clean. Laser hair removal is
most effective on pale skin so we recommend avoiding sunbathing, sun beds and fake tanning if possible.
How should I prepare the hairs for laser hair removal?
The best results are on hairs which are only 1-3 mm long, we recommend trimming the hairs before treatment. Alternatively, you can shave
before treatment as long as during treatment the hair is visible enough for the laser to be aimed at the root.
How will my skin appear after the treatment?
Generally no perceptible changes will be apparent. A slight redness after treatment may occur but will normally fade over 24 hours. Any
localised redness after treatment is caused by the destruction of the hair follicles and is quite normal. owever, if any redness remains after
24 hours this would indicate you have selected too high a power level for your skin type. Please refer to the “Patch Test” section. Also note,
any longer lasting redness will also disappear.
After aser Hair Removal is there anything to avoid?
Sun exposure or deep tanning should be avoided for at least a week. If the skin is exposed use a sunscreen. Also avoid using abrasive cleansers
or skin peeling treatments. Avoid swimming in chlorinated water or using a hot tub for 48 hours. The chlorine in the water can result in
itchiness.
Is there any aftercare routine I should follow?
If you wish, you can apply an unperfumed soothing lotion, an ice pack or wet towel to cool the treated area. Take care to keep the treated
area particularly clean for 3 days. Ideally, use an anti-bacterial soap twice daily. When treating the underarms, avoid using antiperspirant
deodorant for 2–3 days.
Y O U R Q U E S T I O N S A N S W E R E D

10
How often can I repeat aser Hair Removal treatment?
As long as the hair follicle or surrounding skin is not red, sore or inflamed, treatment can be repeated after 24 hours. Most people wait 3–4
weeks between treatments to see which hairs have been shed and to identify new regrowth. The timing for follow on treatments is not critical.
Choose a time which is convenient for you. Avoid excessive treatment on the same region at one time. This may cause reddening and swelling.
How many treatments will I need?
Laser hair reduction is generally considered to be effective and permanent after 6 treatments over a 6 month period.
This varies from person
to person and depends on the area you are treating, hair density, your hair’s growth cycle and colour. Dark hair on fair skin responds to laser
therapy best, but both dark and fair hair may take several treatments for long-term results. Some individuals may require more, and some
fewer treatments, to achieve satisfaction. Initially with each treatment you will notice a gradual thinning/reduction of hair growth in the treated
area. Women who suffer excessive hair growth due to male type hormones are likely to require long term maintenance.
What areas can I treat?
Most body hair can be removed using Laser air Removal - the most common areas are the face, underarms, legs, chest, back and bikini line.
We do NOT recommend using the Salon Laser Scanning air Remover on eyebrows.
Can I use aser Hair Removal on sensitive skin?
Yes, the laser reacts with the hair, so the surrounding skin will not be affected.
What does it feel like?
Most people don’t feel anything, although one or more mild ‘pin prick’ sensations may be felt.
Can I use other hair removal methods between treatments?
Because the Salon Laser Scanning air Remover needs a hair to be present in the follicle hair removal methods which pluck the hair, such as
waxing, epilators and tweezing are NOT suitable for use between treatments. Bleaching hairs is also NOT suitable as it removes the pigment
and renders the laser ineffective. Shaving, micro-dermabrasion discs and cream depilatories are ideal for use between treatments.
Y O U R Q U E S T I O N S A N S W E R E D

11
I have lost my keys.
Make a note of the serial number of your product from the base of the unit and call our Customer Care on (0) [phone] who will
be happy to send you a replacement key.
The lights on the unit are working but no laser is emitted on pressing the button.
• Ensure the Touch Pins are making contact with the skin.
No lights are working on the unit.
• Ensure the Adapter plug is turned on at the wall and the power lead is fully inserted in the back of the unit.
• If controls on either Main Unit or Wand are left untouched for 20 minutes, the System will shut down. To restart, turn the Key anticlockwise
to the off position then restart the unit.
The unit is not responding and one of the power level lights is flashing.
• This indicates a lockout. If you experience a ‘lockout’, simply reset the unit by turning it off with the key. Wait 5 seconds before turning
the unit on again.
If your Laser air Remover mal-functions this can be corrected by switching the key switch off and turning on again and follow the start-up
instructions.
T R O U B L E S O O T I N G

12
• After use always unplug the Adapter and store out of reach of children.
• Only use this product with the Mains Adapter supplied.
• To protect the laser, do not store at temperatures exceeding 40ºC.
• While unplugged, regularly clean the Front Face of the Wand and Touch Pins with a cotton bud, to ensure optimum laser output.
• Do not immerse the Main Unit or Wand in water.
• Always store the Wand on the Main Unit and do not use it for any other purpose than intended.
• After use, wipe the Wand clean with a slightly damp cloth. The Main Unit can also be wiped over.
• For laser efficiency, periodically clean the laser aperture with a lint free cloth or cotton bud, ensuring no fibres are left.
• If you experience unexpected behaviour of this product then it is possible some external electromagnetic interference is responsible.
You should remove this source and restart the product to restore full operation. At no time will the laser fire unintentionally.
• Do NOT dissemble or repair. If you have any problems using the product, contact our Customer Care Department.
P R O D U C T S A F E T Y
Due to the divergent laser beam, there is not any threat to life or physical condition by directing the laser beam accidentally at persons if the
lens has not been tampered with. The laser mechanism must only be adjusted by the Dezac Group or its nominated service agents.
This product complies with European safety standards.
UNIT MAINTENANCE

13
C U S T O M E R C A R E
If you experience any difficulties, or if you would like any further information, please call Customer Care on (0) [phone]
or email us at: [e-mail]
For further information, visit: www.riolaserhair.com
G U A R A N T E E
To register your two year guarantee online, visit: www.riobeauty.com/warranty_online.htm
D I S P O S A L
Please ensure that at the END OF T E LIFE of this product the control unit and mains adapter are disposed of in the correct manner in
accordance with local authority requirements, or, returned to The Dezac Group Ltd, Cheltenham, PO Box 54, GL14 2WW, UK.
They must NOT be disposed of with household waste.

Cher Client, Chère Cliente,
Félicitations pour votre achat. L'épilation au laser apporte une solution sur le long
terme à la réduction permanente du poil. Le fait de traiter chaque poil
individuellement pour en éliminer sa racine confère un fort degré de succès qui
engendre des résultats durables. En effectuant vous-même le traitement à la maison,
vous pourrez économiser de nombreuses séances coûteuses en institut. De par sa
nature même, le traitement au laser est relativement lent par rapport aux méthodes
d'épilation contemporaines. Toutefois, le temps investi est plus que justifié par la
permanence des résultats obtenus. Il est important de bien comprendre le procédé
et plus particulièrement le cycle de la pousse du poil. Ce livret vous aidera à obtenir
la réduction de pilosité que vous recherchez. Merci donc de le lire attentivement.
Si vous avez des questions à poser ou des suggestions à faire, n'hésitez pas à appeler
nos représentants du service clientèle au [phone]. Ils se feront un plaisir
de vous aider à obtenir les meilleurs résultats avec votre épilateur laser Salon Laser.

15
Ne convient pas aux couleurs de peau afro-antillaise et noire. Ne convient pas aux poils gris.
L'épilation au laser n'est pas censée causer de gêne. Si vous ressentez de la gêne ou des irritations, il se peut que le réglage soit trop
élevé ou que votre teint (couleur de la peau) ne soit pas adapté à une utilisation de ce produit.
NE traitez PAS les zones de la peau suivantes : tatouages, maquillage permanent, fossettes, verrues, poil poussant sur des taches
noires, maladie de la peau, taches de naissance, brûlures, lèvres, bouts de sein, parties génitales ou anales, eczéma, cils, sourcils, à
proximité des yeux, poils du nez ou de l'oreille.
NE traitez PAS les mêmes poils ou la même zone de manière répétée pendant une même séance.
Les dispositifs de sécurité intégrés protègent les yeux de toute exposition au rayon laser. Toutefois, ne visez jamais la tige portable
vers les yeux ou à proximité.
N'utilisez PAS l'appareil si vous avez consommé de l'alcool ou si vous êtes souffrant(e) ou fatigué(e).
N'utilisez pas l'appareil à proximité de matériaux inflammables.
Danger de réflexion : Veuillez enlever tous les bijoux à proximité de la zone à traiter avant utilisation.
Conservez l'appareil hors de portée des enfants et des animaux domestiques. Lorsque l'appareil n'est pas utilisé, rangez la clé de
manière responsable dans un endroit sûr et hors de portée des enfants.
Tout usage abusif de l'appareil présente des risques de blessure.
NE passez PAS outre les dispositifs de sécurité et n'ouvrez pas l'appareil.
A V E R T I S S E M E N T S

16
Entrez le code du bouton de sécurité en appuyant sur les touches (surlignées en noir) dans l'ordre suivant :
Si le code est entré correctement, l'appareil émet 2 bips. Le voyant de l'interrupteur à clé arrête de clignoter et devient vert. Le voyant
du niveau de puissance le plus faible devient bleu. Puis, les voyants des touches SCAN et SINGLE deviennent bleus et clignotent, ce qui
indique que la sélection peut commencer.
Note : La durée imite pour entrer e code est de 60 secondes. L'apparei s'éteint en cas de saisie incorrecte du code ou de dépassement
du dé ai de 60 secondes ( e voyant c ignotant de 'interrupteur à c é passera du vert à 'orange et 'apparei émettra deux bips graves).
Tournez a c é sur arrêt, attendez que ques secondes puis tournez à nouveau a c é sur marche et entrez e code.
C O D E D E S É C U R I T É
1234

17
COMMENT LES LASERS FONCTIONNENT-ILS ?
Les lasers émettent un rayon de lumière intense, composé d'une seule longueur d'onde ou couleur. La peau est essentiellement transparente à
la lumière et la plage de la longueur d'onde est comprise entre 600 et 1 100 nm (nanomètres) alors que les structures qui contiennent de la
mélanine absorbent l'énergie laser de cette longueur d'onde. Il est ainsi possible de cibler le follicule pileux qui présente une concentration de
mélanine sans attaquer la zone environnante.
L'énergie de la lumière absorbée par le pigment de mélanine se traduit par l'échauffement rapide du follicule pileux. Cette chaleur détruit les
cellules (papilles) responsables de la croissance du poil. Si la chaleur adéquate est atteinte, le follicule est alors désactivé de manière permanente,
ce qui se traduit par une réduction permanente de la pousse du poil.
T Y P E S D E P E A U A D A P T É S
La mélanine qui se trouve dans l'épiderme absorbe également de l'énergie et limite la profondeur de pénétration du laser dans la peau.
L'utilisation d'une longueur d'onde lumineuse de 808 nm permet de traiter les types de peau foncée ainsi que les types de peau claire.
Toutefois, l'épilation laser ne convient pas pour des teintes de peau afro-antillaise ou noire. L'épilation laser est également inefficace pour
enlever des poils blancs ou gris. L'électrolyse peut être envisagée comme une autre possibilité de traitement.
À titre indicatif, les couleurs de la peau sont classifiées selon les phototypes de peau de Fitzpatrick, décrits dans le tableau ci-contre.

18
24 heures avant le traitement, vérifiez que votre peau
ne produit pas de réactions en faisant un essai sur
quelques zones de poils.
Les touches + et - augmentent et réduisent les niveaux
de puissance. Traitez plusieurs zones pileuses en utilisant
chaque niveau de puissance, jusqu'au niveau maximal de
puissance autorisé pour votre type de peau (voir le
tableau). Si vous ressentez une impression de gêne,
choisissez le niveau inférieur de puissance : il correspond
au niveau maximal de puissance recommandé.
Une légère rougeur peut apparaître après le traitement.
Toute rougeur localisée apparaissant après le traitement
est provoquée par la destruction du follicule pileux, ce
qui est parfaitement normal. Toutefois, si une rougeur
persiste au bout de 24 heures, cela signifie que le niveau
de puissance sélectionné est trop élevé pour votre type
de peau. Utilisez le niveau inférieur de puissance suivant
pendant le traitement.
À NOTER : la couleur de la peau varie selon les différentes
parties du corps. Vous pouvez éprouver la nécessité de
choisir des réglages différents en fonction des zones
à traiter. Chaque zone doit être testée pour connaître le
niveau maximal de puissance qui peut être utilisé.
T E S T P A R A P P L I C A T I O N L O C A L E
Type
de
peau
Couleur de peau
Historique de
bronzage
Niveau maximal de
puissance
I
Claire,
"translucide"
Attrape des coups de
soleil, ne bronze jamais
Tous les
niveaux de
puissance
laser doivent
être adaptés.
II
Pâle
Attrape des coups de soleil,
bronze avec difficulté
III
Pâle à plus ou
moins pâle
Attrape des coups de soleil
légers, bronze lentement
IV
Plus ou moins
pâle à foncée
Attrape rarement des
coups de soleil, bronze
facilement
Jusqu'au
niveau 3
V
Très foncée
Attrape très rarement des
coups de soleil, bronze très
facilement
Non
adaptée à
l'épilation
laser Rio
VI
Noire
N'attrape jamais de coups
de soleil, bronze très
facilement