Rio SUFA2 User manual

Version 1.1
Facial Steamer (SUFA2)

Facial Steamer (SUFA2)
Facial steaming is one of the most beneficial
spa beauty treatments for skin health and
overall skin condition.
Atomised steam cleanses the skin, opening
the skin pores to help eliminate toxins,
residual make-up and daily grime.
Product Overview

Facial Steamer (SUFA2)
Getting started
STEP 1 Ensure that your Facial Steamer is placed on a flat surface.
Pull the water chamber upwards to remove from the water inlet.
STEP 2 Unscrew the cap and fill the water chamber with 120ml of
water, ensure that the water level does not exceed this.
Note: The use of filtered or distilled water is recommended.
STEP 3 Firmly re-attach the cap and push the water chamber fully back
into the water inlet.
STEP 4 Remove any make up and rinse your face well.
How To Use

Facial Steamer (SUFA2)
Instructions for use
STEP 1 Adjust the angle of the mist nozzle to direct the steam onto the
desired area of your face during treatment. NOTE: The mist nozzle only
adjusts up and down and not side to side.
STEP 2 Insert the mains plug into your power supply and turn on the
power button, the indicator light will illuminate red. NOTE: The steamer
will take approx 1 minute to heat up before any steam
is produced.
STEP 3 Place your face no closer than 10cm away from the mist nozzle.
NOTE: We recommend five treatments per
week, each treatment lasting no longer
than ten minutes.
STEP 4 To finish rinse your face with cold
water and pat dry.
How To Use

Facial Steamer (SUFA2)
After use
STEP 1 Turn the unit off by pressing the power button and remove the
mains plug from your power supply. Allow the unit to cool for 30
minutes.
STEP 2 Remove the water chamber, unscrew the cap and pour water
out. Note: Ensure that you have emptied any water from the water
inlet.
STEP 3 Open the water chamber plug on the base of the unit and pour
out any remaining water.
STEP 4 Re-attach the cap and push the water chamber fully back into
the water inlet.
How To Use

Facial Steamer (SUFA2)
Contents:
•Facial steamer unit
•Power cable
•Measuring jug
Tech Spec
•Programs: On/Off
•Power Levels: On/Off
•Packed Product Dimensions:
(height x width x depth) 222 x 135
x 90 mm
•Un-packed Product Dimensions:
(height x width x depth) 280 x 220
x 115 mm
•AC/DC adaptor: N/A
•Mains operated: Yes
•Battery Operated/Type: N/A
•Packed Weight (Kg): 125g
•Product Net Weight (Kg): 100g
•Manufacturer's Guarantee: 2 years
•Barcode: 5019487003768