RiverRidge 02-154/06-096 User manual

ASSEMBLY INSTRUCTIONS
RiverRidge®Ladder Wall Shelf
ITEM #: 02-154/06-096 WHITE
ITEM #: 02-155/06-097 GRAY
ADULT ASSEMBLY REQUIRED
This product requires assembly by an adult because of small parts. Care should be taken in
unpacking and assembling this item to keep small parts away from children.
WARNING SEE FULL WARNING ON PAGE 2
Young children can be seriously injured or killed if furniture tips over. Don’t use
this item for a TV stand or place heavy objects on top of item. Always use
angle-braces or anchors to secure furniture to the wall.

THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER SHELF OR A TOTAL OF 60
POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 20 POUNDS OR 60
POUNDS TOTAL WEIGHT. IF OVERLOADED WITH MORE THAN 20 POUNDS PER
SHELF OR 60 POUNDS TOTAL WEIGHT, SHELF MAY TIP FROM WALL AND
CAUSE SERIOUS INJURY OR DEATH.

PARTS LIST
NO
QTY
DESCRIPTION
1
1PC
TOP SHELF LEFT RAIL BOARD
2
1PC
TOP SHELF RIGHT RAIL BOARD
3
1PC
MIDDLE SHELF LEFT RAIL BOARD
4
1PC
MIDDLE SHELF RIGHT RAIL BOARD
5
1PC
BOTTOM SHELF LEFT RAIL BOARD
6
1PC
BOTTOM SHELF RIGHT RAIL BOARD
7
1PC
TOP SHELF
8
1PC
MIDDLE SHELF
9
1PC
BOTTOM SHLF
10
3PCS
REAR RAIL BOARD
11
1PC
REAR LOWER BACK BOARD
12
1PC
LEFT SIDE FRAME
13
1PC
RIGHT SIDE FRAME

PARTS LIST
NO
PART
QTY
DESCRIPTION
A
22PCS
WOOD DOWEL
B
12PCS
MACHINE SCREW (6 X 20MM)
C
27PCS
WOOD SCREW (3.5 X 25MM)
D
5PCS
WALL SCREW (4 X 30MM)
E
2PCS
PLASTIC ANCHOR
F
3PCS
WOOD PEG
TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED)
THE USE OF POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY
TOOL NEEDED FOR SECURING TO WALL: POWER DRILL (NOT INCLUDED)
To order replacement parts at no cost to you, email [email protected],
call 1-(844)-223-5201 or order parts online at www.riverridgehome.com

STEP 1
1.Insert 1 wood dowel (A) into wood dowel hole on end of rear rail board (10).
2.Attach top shelf left rail board (1) to rear rail board (10) by inserting wood dowel (A) into hole on top
shelf left rail board (1).
3.Insert 1 wood screw (C) through hole on top shelf left rail board (1) and tighten to rear rail board (10).
4.Repeat above steps to assemble top shelf right rail board (2) to rear rail board (10).
STEP 2
1.Insert 1 wood dowel (A) into wood dowel hole on end of rear rail board (10).
2.Attach middle shelf left rail board (3) to rear rail board (10) by inserting wood dowel (A)
3.into hole on middle shelf left rail board (3).
4.Insert 1 wood screw (C) through hole on middle shelf left rail board (3) and tighten to rear rail board
(10).
5.Repeat above steps to assemble middle shelf right rail board (4) to rear rail board (10).

STEP 3
1.Insert 1 wood dowel (A) into wood dowel hole on end of rear rail board (10).
2.Attached bottom shelf left rail board (5) to rear rail board (10) by inserting wood dowel (A)
3.into hole on bottom shelf left rail board (5).
4.Insert 1 wood screw (C) through hole on bottom shelf left rail board (5) and tighten to rear rail board
(10).
5.Repeat above steps to assemble bottom shelf right rail board (6) to rear rail board (10).
STEP 4
1.Insert 4 wood dowels (A) into wood dowel holes on top shelf (7).
2.Attach top shelf (7) to pre-assembled top shelf left rail board (1), top shelf right rail board (2) and rear rail
board (10) by inserting wood dowels (A) into wood dowel holes on top shelf left rail board (1), top shelf
right rail board (2) and rear rail board (10).
3.Insert 7 wood screws (C) through holes on top shelf (7) and tighten to top shelf left rail board (1), top shelf
right rail board (2) and rear rail board (10).

STEP 5
1.Insert 4 wood dowels (A) into wood dowel holes on middle shelf (8).
2.Attach middle shelf (8) to pre-assembled middle shelf left rail board (3), middle shelf right rail board (4)
and rear rail board (10) by inserting wood dowels (A) into wood dowel holes on middle shelf left rail
board (3), middle shelf right rail board (4) and rear rail board (10).
3.Insert 7 wood screws (C) through holes on middle shelf (8) and tighten to middle shelf left rail board (3),
middle shelf right rail board (4) and rear rail board (10).
STEP 6
1.Insert 4 wood dowels (A) into wood dowel holes on bottom shelf (9).
2.Attach bottom shelf (9) to pre-assembled bottom shelf left rail board (5), bottom shelf right rail board (6)
and rear rail board (10) by inserting wood dowels (A) into wood dowel holes on bottom shelf left rail
board (5), bottom shelf right rail board (6) and rear rail board (10).
3.Insert 7 wood screws (C) through holes on bottom shelf (9) and tighten to bottom shelf left rail board
(5), bottom shelf right rail board (6) and rear rail board (10).

STEP 7
1.Insert 4 wood dowels (A) into wood dowel holes on end of rear lower back board (11).
2.Attach 3 wood pegs (F) to rear lower back board (11) by inserting 3 wall screws (D) through holes on rear
lower back board (11) and tighten to wood pegs (F).
STEP 8
1.Attach pre-assembled top shelf (7) and rail boards to left side frame (12) by inserting 2 machine screws (B)
through holes on top shelf left rail board (1) and tighten to left side frame (12).
2.Repeat above step to assemble middle shelf (8) and bottom shelf (9) to left side frame (12).
3.Attach rear lower back board (11) to left side frame (12) by inserting wood dowels (A) into wood dowels holes
on left side frame (12).

STEP 9
1. Attach the pre-assembled top shelf (7) and rail boards to right side frame (13) by inserting 2 machine screws
(B) through holes on top shelf left rail board (1) and tighten to right side frame (13).
2.Repeat above steps to assemble middle shelf (8) and bottom shelf (9) to right side frame (13).
3.Attach rear lower back board (11) to right side frame (13) by inserting wood dowels (A) into wood dowels
holes on right side frame (13).
STEP 10
1.Drill 2 holes on wall in desired position and insert 2 plastic anchors (E) into holes.
2. Insert 2 wall screws (D) into plastic anchors (E) and hang wall shelf on wall by aligning screws with brackets on
shelf.

ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose
screws/parts. Take appropriate action necessary to correct hazards such as tightening
of screws and taking any damaged parts away from children.
WARNING Please make sure your item is
secured to the wall, per assembly instructions.

Enjoy your new RiverRidge® Cabinet!
Thank you for purchasing this RiverRidge® Home item. We hope you
enjoy it and consider purchasing other RiverRidge® items.
To order replacement parts at no cost to you, email [email protected],
call 1-(844)-223-5201 or order parts online at www.riverridgehome.com
RiverRidge® is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016