RiverRidge 02-144 User manual

ASSEMBLY INSTRUCTIONS
RiverRidge® Kids Corner Storage Cabinet
with Cubbies and Shelves
ITEM #: 02-144 White
ITEM #: 02-145 Gray
ADULT ASSEMBLY REQUIRED
This product requires assembly by an adult because of small parts. Care should be taken
in unpacking and assembling this item to keep small parts away from children. During assembly
children should be kept away from the product due to possible risk of injury.
WARNING SEE FULL WARNING ON PAGE 2
Young children can be seriously injured or killed if furniture tips over. Don’t use
this item for a TV stand or place heavy objects on top of item. Always use
angle-braces or anchors to secure furniture to the wall.

This product is suitable for children 3 years and older.
EACH CABINET WILL HOLD UP TO 20 POUNDS PER CUBBY, 10 POUNDS PER CORNER
SHELF AND 25 POUNDS PER TOP SHELF OR A TOTAL OF 175 POUNDS. DO NOT LOAD
EACH CUBBY WITH MORE THAN 20 POUNDS, EACH CORNER SHELF WITH MORE THAN 10
POUNDS AND THE TOP SHELF WITH MORE THAN 25 POUNDS. THIS MAY CAUSE DAMAGE
TO THE CABINET AND MAY CAUSE SERIOUS INJURY OR DEATH.

PARTS LIST
NO
QTY
DESCRIPTION
1
1PC
Top Board
2
2PCS
Middle Shelf
3
1PC
Bottom Shelf
4
1PC
Left Side Panel
5
1PC
Right Side Panel
6
3PCS
Vertical Support Board
7
3PCS
Right Support Board
8
3PCS
Left Support Board
9
1PC
Middle Bottom Trim
10
1PC
Left Bottom Trim
11
1PC
Right Bottom Trim

NO
PARTS
QTY
DESCRIPTION
A
21PCS
Cam Bolt
B
21PCS
Cam Lock
C
41PCS
Wood Dowel
D
2PCS
Hinge
E
8PCS
Screw (3x10mm)
F
35PCS
Screw (4x35mm)
G
2PCS
Plastic Anchor
H
2PCS
Screw (4x45mm)
TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED)
THE USE OF A POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY
DO NOT USE ITEM IF ANY PARTS ARE MISSING OR DAMAGED
To order replacement parts at no cost to you, email [e-mail], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.

STEP 1
1. Screw 4 cam bolts (A) into cam bolt holes on top board (1).
2. Insert 4 wood dowels (C) into wood dowel holes on top board (1).
3. Screw 4 cam bolts (A) into cam bolt holes on middle shelf (2).
4. Insert 4 wood dowels (C) into wood dowel holes on middle shelf (2).
5. Repeat above steps for middle shelf (2).
STEP 2
1. Screw 6 cam bolts (A) into cam bolt holes on bottom shelf (3).
2. Insert 4 wood dowels (C) into wood dowel holes on bottom shelf (3).
3. Attach 1 hinge (D) to left bottom trim (10) by inserting 2 screws (E) through holes on hinge (D)
and tighten to left bottom trim (10).
4. Attach 1 hinge (D) to right bottom trim (11) by inserting 2 screws (E) through holes on hinge
(D) and tighten to right bottom trim (11).
5. Attach left bottom trim (10) to middle bottom trim (9) by inserting 2 screws (E) through holes
on hinge (D) and tighten to middle bottom trim (9).
6. Attach right bottom trim (11) to middle bottom trim (9) by inserting 2 screws (E) through holes
on hinge (D) and tighten to middle bottom trim (9).

STEP 3
1. Screw 1 cam bolt (A) into cam bolt holes on vertical support board (6).
2. Repeat above step for other 2 vertical support boards (6).
3. Insert 2 wood dowels (C) into wood dowel holes on vertical support board (6).
4. Attach 1 right support board (7) to vertical support board (6) by inserting wood dowels (C) into
wood dowel holes and inserting cam bolt (A) into cam lock hole on right support board (7).
5. Insert 1 cam lock (B) into cam lock hole on right support board (7) and rotate clockwise to
secure cam bolt in place.
6. Repeat above steps to assemble 2 more right support boards (7) and vertical support
boards (6).
STEP 4
1. Attach vertical support board (6) and right support board (7) to top board (1) by inserting cam
bolts (A) into cam lock holes on vertical support board (6) and right support board (7).
2. Insert 4 cam locks (B) into cam lock holes on vertical support board (6) and right support
board (7) and rotate clockwise to secure cam bolts in place.
3. Insert 4 wood dowels (C) into wood dowel holes on vertical support board (6) and right
support board (7).
4. Attach 1 middle shelf (2) to vertical support board (6) and right support board (7) by inserting
wood dowels (C) into wood dowel holes on middle shelf (2).
5. Insert 3 screws (F) through holes on middle shelf (2) and tighten to vertical support board (6)
and right support board (7).

STEP 5
1. Attach vertical support board (6) and right support board (7) to middle shelf (2) by inserting
cam bolts (A) into cam lock holes on vertical support board (6) and right support board (7).
2. Insert 4 cam locks (B) into cam lock holes on vertical support board (6) and right support
board (7) and rotate clockwise to secure cam bolts in place.
3. Insert 4 wood dowels (C) into wood dowel holes on vertical support board (6) and right
support board (7).
4. Attach 1 middle shelf (2) to vertical support board (6) and right support board (7) by inserting
wood dowels (C) into wood dowel holes on middle shelf (2).
5. Insert 3 screws (F) through holes on middle shelf (2) and tighten to vertical support board (6)
and right support board (7).
STEP 6
1. Attach vertical support board (6) and right support board (7) to middle shelf (2) by inserting
cam bolts (A) into cam lock holes on vertical support board (6) and right support board (7).
2. Insert 4 cam locks (B) into cam lock holes on vertical support board (6) and right support
board (7) and rotate clockwise to secure cam bolts in place.
3. Insert 4 wood dowels (C) into wood dowel holes on vertical support board (6) and right
support board (7).
4. Attach 1 bottom shelf (3) to vertical support board (6) and right support board (7) by inserting
wood dowels (C) into wood dowel holes on bottom shelf (3).
5. Insert 3 screws (F) through holes on bottom shelf (3) and tighten to vertical support board (6)
and right support board (7).

STEP 7
1. Attach left bottom trim (10), middle bottom trim (9) and right bottom trim (11) to bottom shelf
(3) by inserting cam bolts (A) into cam lock holes on left bottom trim (10), middle bottom trim
(9) and right bottom trim (11).
2. Insert 6 cam locks (B) into cam lock holes on left bottom trim (10), middle bottom trim (9) and
right bottom trim (11) and rotate clockwise to secure cam bolts in place.
3. Slide 3 left horizontal support boards (8) into grooves on top board (1), middle shelf (2) and
bottom shelf (3).
STEP 8
1. Insert 1 wood dowel (C) into wood dowel hole on left bottom trim (10).
2. Attach left side panel (4) to pre-assembled unit by inserting wood dowel (C) into wood dowel
hole on left side panel (4) and inserting 13 screws (F) through holes on left side panel (4) and
tighten to top board (1), middle shelf (2), bottom shelf (3) and left bottom trim (10).
3. Insert 5 wood dowels (C) into wood dowel holes on left side panel (4).
4. Repeat above steps 1-2 to assemble right side panel (5) to pre-assembled unit.

STEP 9
Option #1: Securing to Drywall
1. Position cabinet against wall in desired location. Using a pencil, make small marks on wall
through holes on side panels. Move cabinet away from wall and screw 2 plastic anchors (G) into
wall on pencil marks.
2. Place cabinet against wall, insert 2 screws (H) through holes on side panels, then tighten to
plastic anchors (G).
Option #2: Securing to Drywall and Wood Stud
1. Position cabinet against wall in desired location. Insert 2 screws (H) through holes on side panels,
then tighten through drywall and into wood stud.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or
loose screws/parts. Take appropriate action necessary to correct hazards such as
tightening of screws and taking any damaged parts away from children.
WARNING Please make sure your item is
secured to the wall, per assembly instructions.
CARE INSTRUCTIONS:
Wipe clean with a water dampened cloth. Wipe dry with clean cloth.
IMPORTANT:
Keep assembly instructions for future reference.

Enjoy your new RiverRidge® Cabinet!
Thank you for purchasing this RiverRidge® Home item. We hope you
enjoy it and consider purchasing other RiverRidge® items.
To order replacement parts at no cost to you, email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.
RiverRidge® is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016