Argos Verona Beech User manual

Simple Assembly Instructions - Please keep for future reference
IMPORTANT
1. Read these instructions carefully and
familiarise yourself with the procedure
before assembling the unit.
2. Check that you have all the component
parts following the list on the back
cover and familiarise yourself with
each part before proceeding.
3. Take all the fittings out of the plastic bag
and separate them into their groups.
4. Ensure you have enough space to lay out
all the parts before assembly.
Verona Beech / Silver Shelving Unit
Components
5. To avoid scratching it is recommended
that you assemble the unit on a soft
level surface.
Fittings
8-03
A4 x Cap Screw
D1 x Screw
C1 x Screw
3 x Shelf
A
12 x Leg
C
4 x Foot
B
1 x Wall Strap
B
E1 x Wall Plug
1 x Top Shelf
D

Assembly Instructions Assembly Instructions
Stage 2 – Finishing the Unit
Care and Maintenance
Stage 1 – Fitting the Legs
Safety
To avoid any risk of suffocation to animals or children dispose of the plastic
bags immediately.
Fitting
From time to time please ensure there are no loose screws on the product.
Cleaning
As with all surfaces clean with a damp cloth and mild detergent, do not use bleach
or abrasive products.
2. Now place the unit in the desired
location.
See fig. 6.
fig. 1
B
IMPORTANT: When drilling into
walls always check that there
are no hidden wires or pipes etc.
Make sure that the screws and
wall plugs supplied are suitable
for supporting the unit. Consult
a qualified tradesperson if you
are not sure.
2. Use Legs C to fix the Feet B
onto the Shelf A.
See fig. 2.
3. Use Legs C to fix the other
Shelves A onto the unit.
See fig. 3.
1. Unscrew Cap Screws Afrom the
Feet B.
See fig. 1.
NOTE: It would be useful to ask
someone to help you at this
stage.
1. Use Cap Screws Ato fix the Top
Shelf D on the top of the unit.
See fig. 4.
3. Use Screw Dto fix the Wall
Strap Bonto the underside of
Top Shelf D.
See fig. 5.
B
D
D
A
fig. 4
A
fig. 3
C
C
A
A
fig. 2
C
A
B
4. Using a drill, predrill a hole at the
desired height. Use the Wall Plug
Eto fit to the hole. Pass Screw
C through loose end of Wall Strap
Bto fix the unit into the wall.
See fig. 5.
fig. 5
C
E
fig. 6