RiverRidge 06-001 User manual

ASSEMBLY INSTRUCTIONS
RiverRidge® X-Frame 4-Shelf Storage Tower
ITEM #: 06-001/16-018 White
ITEM #: 06-002/16-019 Espresso
ADULT ASSEMBLY REQUIRED
This product requires assembly by an adult because of small parts. Care should be taken
in unpacking and assembling this item to keep small parts away from children. During assembly
children should be kept away from the product due to possible risk of injury.
WARNING SEE FULL WARNING ON PAGE 2
Young children can be seriously injured or killed if furniture tips over. Don’t use
this item for a TV stand or place heavy objects on top of item. Always use
angle-braces or anchors to secure furniture to the wall.

THIS SHELF UNIT WILL HOLD UP TO 25 POUNDS PER SHELF OR A TOTAL OF 100
POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 25 POUNDS OR 100
POUNDS TOTAL WEIGHT. IF OVERLOADED WITH MORE THAN 25 POUNDS PER
SHELF OR 100 POUNDS TOTAL WEIGHT, THIS MAY CAUSE DAMAGE TO THE SHELF
AND MAY CAUSE SERIOUS INJURY OR DEATH.

PARTS LIST
NO
QTY
DESCRIPTION
1
1PC
Top Board
2
2PCS
Side Frame
3
3PCS
Shelf
4
1PC
Back Cross Bar
5
1PC
Front Cross Bar

PARTS LIST
NO
PARTS
QTY
DESCRIPTION
A
16PCS
Screw (5x45mm)
B
4PCS
Screw (4x35mm)
C
16PCS
Plastic Cap
D
2PCS
Screw (4x55mm)
E
2PCS
Plastic Anchor
F
1PC
Allen Wrench
TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED)
THE USE OF A POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY
DO NOT USE ITEM IF ANY PARTS ARE MISSING OR DAMAGED
To order replacement parts at no cost to you, email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.

STEP 1
1. Place top board (1) upside down on soft padded surface.
2. Attach back cross bar (4) to top board (1) by inserting 2 screws (B) through holes on back
cross bar (4), then tighten to top board (1).
3. Repeat above step to attach front cross bar (5) to top board (1).
STEP 2
1. Attach top board (1) to side frame (2) by inserting 2 screws (A) through holes on side frame
(2), then tighten to back cross bar (4) and front cross bar (5) by using Allen wrench (F).
When tightening, slightly push screw in to catch inner thread.
2. Attach 1 shelf (3) to side frame (2) by inserting 2 screws (A) through holes on side frame
(2), then tighten to shelf (3) using Allen wrench (F).
3. Repeat above step to assemble other 2 shelves (3).

STEP 3
1. Attach other side frame (2) to top board (1) and 3 shelves (3) by inserting 2 screws (A)
through holes on side frame (2) and tighten to front and back cross bars (4 & 5).
2. Insert 6 screws (A) through holes on side frame (2) and tighten screws (A) into each shelf (3).
STEP 4
1. Press 16 plastic caps (C) into screw holes on both side frames (2).
*Tip: If added pressure is needed to keep plastic caps in place – cover caps with a piece of paper and tap
lightly with hammer to secure cap.

STEP 5
Option #1: Securing to Drywall
1. Position shelf against wall in desired location. Using a pencil, make 2 small marks on wall
through holes on back cross bar (4). Move shelf away from wall and screw 2 plastic anchors
(E) into wall on pencil marks.
2. Place shelf against wall, insert 2 screws (D) through holes on back cross bar (4), then
tighten to plastic anchors (E).
Option #2: Securing to Drywall and Wood Stud
1. Position shelf against wall in desired location. Insert 2 screws (D) through holes on back cross
bar (4), then tighten through drywall and into wood stud.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or
loose screws/parts. Take appropriate action necessary to correct hazards such as
tightening of screws and taking any damaged parts away from children.
WARNING Please make sure your item is
secured to the wall, per assembly instructions.
CARE INSTRUCTIONS:
Wipe clean with a water dampened cloth. Wipe dry with clean cloth.
IMPORTANT:
Keep assembly instructions for future reference.

Enjoy your new RiverRidge® Shelf!
Thank you for purchasing this RiverRidge® Home item. We hope you
enjoy it and consider purchasing other RiverRidge® items.
To order replacement parts at no cost to you, email [email protected], call
1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
If purchased outside of the United States, please contact retailer where purchased.
RiverRidge® is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016