Great Little Trading Lulworth User manual

1
Lulworth Bedside Table
Assembly Difculty
29/06/2021
V1
one-person jobeasy - medium - hard
A few important pointers before you start:
• Please read the instructions right through before you start, and
check that all the components have been included in the pack;
we nd separating all the hardware into piles makes it easier to
be sure that everything is present and correct.
• Make sure you have the right tools.Allen keys are provided
if required, but screw drivers and other tools are not.You’ll
nd details of the tools you need at the beginning of the
instructions.
• It’s a good idea to build the unit in the room where you are
going to be using it, to avoid the need to move it after it’s been
assembled.
• Do not throw away any packing materials until assembly is
complete, just in case you accidentally discard smaller parts or
hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.

2
Safety Warnings:
• PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
• Adult assembly required.
• Unassembled product contains small parts which may present a
choking hazard.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• Assemble and use on a at and level surface.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Check all xtures and ttings regularly and tighten as necessary.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
• Regularly check all fastenings, xtures and ttings to ensure that they
properly tightened.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
A B
C D
EF
1x Top Panel
Component Check List Component Check List
1x Side Panel
1x Side Panel 1x Shelf Panel
1x Back Panel 1x Drawer Side Panel
1x Drawer Side Panel 1x Drawer Front Panel
G H
I J
1x Drawer Base Panel 1x Drawer Back Panel
#1 #2
#3 #4
#5 #6
You will need
(not supplied)
Philips Head Screwdriver
#7 #8
#9 #10
18x Cam Dowels
1x LH Flat Runner
18x Cam Locks
1x RH Flat Runner
1x L-Shaped Runner
12x Screw
(12mm)
1x L-Shaped Runner
1x Handle
1x Flat-ended Screw 4x Screw
(25mm)

4
Hardware for Step 1:
STEP 1:
Working on a protective surface such as a rug or carpet, take both side panels
(B & C) and using a phillips screwdriver insert 4x cam dowels (#1) into the
holes shown on EACH panel.
8x #1 Cam Dowels
C
C
B
B
#1
#1
#1
#1
#1
#1
#1
#1
#4
#4
#7
#7
#7
#7
#7
#7
#7
#7
#7
STEP 2:
Take side panel (B) and attach at runner (#4) to the panel using 3x screws
(#7).
Note: Position the runner with the wheel at the front of the panel (away from the
hardware) and with the wheel closest to the legs.Align the holes on the runner
shown in the close up with the drill holes in the panel. When xed, the runner will be
set back from the front edge of the panel.
REPEAT step using at runner (#3) and side panel (C).
Ensure the screws are fully inserted for smooth drawer operation.
Hardware for Step 2:
1x #3 LH Flat Runner
1x #4 RH Flat Runner
6x #7 Screw (12mm)
#3
FRONT
FRONT

5
STEP 3:
Take side panel (B) and orientate so it is on its side as
shown.
Take shelf panel (D) and push the cut out corners of
the panel over the cam dowel hardware on the legs.
Ensure the large drill holes on the shelf panel are facing
outwards to what will be the oor.
Insert 2x cam locks (#2) into the large drill holes and
turn clockwise to lock.
Now take back panel (E) and orientate so that the drill
holes on the long edge are facing up/outward and all
the large drill holes are facing you/inside. Push panel (E)
onto the top section of side panel (B) as shown.
Insert 2x cam locks (#2) into the large drill holes and
turn clockwise to lock.
STEP 4:
Now align side panel (C) to join with panels (D & E) using
the cam dowel hardware. Push into position and insert 4x
cam locks (#2) into the large drill holes on panels (D & E)
and turn clockwise to secure.
D
D
B
B
E
C
E
Hardware for Step 3: Hardware for Step 4:
4x #2 Cam Locks 4x #2 Cam Locks
Using Cam Locks:
When inserting into the panel, ensure that each cam
lock’s arrow is pointing towards the drill hole on
the side edge of the panel & the dowel that it will be
receiving.
When the panels are in the connected position,
using a screwdriver, turn the cam lock in a clockwise
direction to lock and secure.
TOP
TOP
BASE/FLOOR
BASE/FLOOR
#2
#2
#2
#2
#2
#2
#2
#2
#2

6
STEP 5:
Take top panel (A) and insert 6x cam dowels (#1)
into the drill holes.
STEP 6:
Stand the bedside table frame on its feet and position top panel (A) over the
frame as shown. Align the hardware with the drill holes on the edges of the
frame and push into position.
Insert 6x cam locks (#2) into the large holes on the panels on the inside of
the bedside table and turn clockwise to lock.
STEP 7:
Take drawer front panel (H) and insert 4x cam
dowels (#1) into the drill holes as shown.
STEP 8:
Take drawer side panel (F) and postion L-shaped
runner (#5) onto the edge with the drill holes
present. The runner will t the full length of the
panel and should be positioned with the wheel at
the end next to the 2 small drill holes as shown.
It should NOT be on the side with the groove.
Ensure the holes are aligned with the drill holes
and x runner in place with 3x screws (#7).
REPEAT with drawer side panel (G) and L-shaped
runner (#6).
Ensure the screws are fully inserted to allow the
drawer to run smoothly.
Hardware for Step 7:
4x #1 Cam Dowels
Hardware for Step 5:
Hardware for Step 6:
6x #1 Cam Dowels
6x #2 Cam Locks
A
A
#1
#2 #2
#1
#1
#1
#1
#1
#1
#1
#2
#7
#7
#7
#7
#1
#1
H
Hardware for Step 8:
1x #5 L-Shaped Runner
1x #6 L-Shaped Runner
6x #7 Screws (12mm)
#2
*Note: Ensure the wheel is
aligned with the small drill
holes on the side panels.
G
F
#5
#6
#7
#7

7
STEP 10:
Take drawer front panel (H) and connect with the
drawer box. When in place, insert 2x cam locks
(#2) into the large holes on BOTH side panels (F &
G) and turn clockwise to secure.
Now attach drawer handle (#8) to the drawer
using 1x at ended screw (#9).
STEP 9:
Create the drawer box by taking drawer side panels
(F & G) and join to drawer back panel (J) using 2x
screws (#10) on EACH side. Ensure the groove on
the inside of the drawer box is aligned on all 3 panels
before xing.
Now slide drawer base panel (I) into the grooves on
the drawer box, ensuring it is pushed fully into the
groove of panel J.
Hardware for Step 10:
4x #2 Cam Locks
1x #8 Handle
1x #9 Flat-Ended Screw
Hardware for Step 9:
4x #10 Screws (25mm)
F
F
G
G
I
H
J
#10
#10
#2
#2
#2
#2
#9
#8
#10
#10
STEP 11:
Insert the completed drawer into the unit.
Your bedside table is now ready to use.
Copyright© 2021 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.