RiverRidge Somerset 06-037 User manual

ASSEMBLY INSTRUCTIONS
RiverRidge® SOMERSET 1 DOOR FLOOR CABINET
ITEM #:06-037 WHITE
ITEM #:06-076 GRAY

Send requests for missing or damaged parts replacements by email to:
[e-mail] or call toll free 1-(844)-223-5201 or order parts on line at
www.riverridgehome.com
THIS SHELF UNIT WILL HOLD UP TO 25 POUNDS PER SHELF OR A TOTAL OF 75 POUNDS. DO
NOT LOAD EACH SHELF WITH MORE THAN 25 POUNDS. IF LOADED WITH MORE THAN 25
POUNDS PER SHELF AS THIS MAY CAUSE DAMAGE TO THE SHELF AND MAY CAUSE SERIOUS
INJURY OR DEATH.

PARTS LIST
NO.PARTS QTY DESCRIPTION
1 1 PC RIGHT SIDE PANEL
2 1 PC LEFT SIDE PANEL
3 1 PC CROSS BAR
4
1 PC BOTTOM BOARD
5 1 PC TOP BOARD
6
1 PC BACK BOARD
7
1 PC DOOR
8
1 PC DRAWER FRONT
BOARD
9
1 PC DRAWER LEFT SIDE
PANEL
10
1 PC DRAWER RIGHT
SIDE PANEL
11
1 PC DRAWER BACK
BOARD
12
1 PC DRAWER BOTTOM
BOARD
13
1 PC
SHELF
14
1 PC LEFT SUPPORT
BOARD
15 1 pc RIGHT SUPPORT
BOARD

NO
PARTS
QTY
DESCRIPTION
A 18 PCS WOOD DOWEL
B 18 PCS CAM BOLT
C 18 PCS CAM LOCK
D 13 PCS
WOOD SCREW
3X10MM
E 2 PCS HINGE
F 1 PC MAGNET PLATE
G 14 PCS
WOOD SCREW
3X12MM
H 1 SET
MAGNET WITH 2
SCREWS
I 4 PCS SHELF HOLDER
J 4 PCS
MACHINE SCREW
4X15MM
K 2 PCS HANDLE
L 5 PCS
LONG WOOD
SCREW 3.8X35MM
N 1 PC PLASTIC ANCHOR
P 2 PCS METAL BRACKET
Q 1 PC
PLASTIC LOCK
STRIP
R 1 PC
WOOD SCREW
4X16MM
S 10 PCS
WOOD SCREW
3.5X12MM
T 1 SET
DRAWER SLIDES
(ATTACH TO SIDE
PANEL)
U 1 SET
DRAWER SLIDERS
(ATTACH TO
DRAWER)

STEP 1
L
STEP 1
1.Attach drawer left side panel (9) to drawer back board (11) by inserting 2 long wood screws (L) through holes
on drawer left side panel (9) and tighten into drawer back board (11).
2.Attach drawer right side panel (10) to drawer back board (11) by inserting 2 long wood screws (L) through holes
on drawer right side panel (10) and tighten into drawer back board (11).
3.Slide drawer bottom board (12) into grooves on drawer left side panel (9) and right side panel (10) and drawer
back board (11).
STEP 2
STEP 2
1. Screw 2 cam bolts (B) into pre-threaded holes on drawer front board (8).
2. Insert 4 wood dowels (A) into dowel holes on the drawer front board (8).
L
11
10
9
12

STEP 3
STEP 3
1.Attach drawer front board (8) to drawer left side panel (9), drawer right side panel (10) and drawer bottom board
(12) by inserting cam bolts (B) and wood dowels (A) into holes on drawer left side panel (9) and drawer right side
panel (10) and inserting edge of drawer bottom board (12) into groove on drawer front board (8).
2.Insert 2 cam locks (C) into cam lock holes on drawer left side panel (9) and drawer right side panel (10) and
rotate clockwise to secure cam bolts (B).
3.Attach 1 handle (K) to drawer front board (8) by inserting 2 machine screw (J) through holes on drawer front
board (8) and tighten to handle (K).
STEP 4
STEP 4
1.Turn assembled drawer upsidedown.
2.Attach drawer slides (attach to drawer-U) to drawer right side panel (10) by inserting 2 wood screws (S) through
holes on drawer slides (attach to drawer-U) and tighten into drawer right side panel (10).
3.Attach drawer slides (attach to drawer-U) to drawer left side panel (9) by inserting 2 wood screws (S) through
holes on drawer slides (attach to drawer-U) and tighten into drawer left side panel (9).
11
10
9
12
C
J
K
8

STEP 5
STEP 5
1.Insert 2 wood dowels (A) into dowel holes on left support board (14).
2.Screw 3 cam bolts (B) into pre-threaded holes on left support board (14.
3.Insert 2 wood dowels (A) into dowel holes on right support board (15).
4.Screw 3 cam bolts (B) into pre-threaded holes on right support board (15).
5.Attach 2 hinges (E) to the left support board (14).
6.Insert 6 wood screws (D) through holes on hinges (E) and tighten to left support board (14).
STEP 6
STEP 6
1.Screw 6 cam bolts (B) into pre-threaded holes on both left side panel (2) and right side panel (1).
2.Insert 6 wood dowels (A) into dowel holes on left side panel (2) and right side panel (1).
3. Attach drawer slides (attach to side panel-T) to left side panel (2), insert 3 wood screw (S) through holes
on drawer slides (attach to side panel-T) and tighten to left side panel (2).
4. Attach drawer slides (attach to side panel-T) to right side panel (1), insert 3 wood screw (S) through holes
on drawer slides attach to side panel (T) and tighten to right side panel (1).

STEP 7
STEP 7
1.Attach left support board (14) to left side panel (2) by inserting cam bolts into cam lock holes and
inserting wood dowels into dowel holes on the left side panel (2).
2.Insert 3 cam locks (C) into cam lock holes on left side panel (2) and rotate clockwise to secure cam bolts in
place.
3. Repeat above steps to assemble right side panel (1) and right support board (15).
STEP 8
STEP 8
1.Attach magnet plate (F) to door(7) by inserting 1 wood screw (D) through hole on magnet plate (F) and
tightening to door (7).
2.Attach handle (K) to door (7) by screwing 2 machine screws (J) through holes on door (7) and tightening
to handle (K).

STEP 9
STEP 9
1.Attach cross bar (3) to left side panel (2) by inserting wood dowel (A) and cam bolt (B) into holes on cross bar
(3) and insert 1 cam lock (C) into cam lock hole on cross bar (3) and rotate clockwise to secure cam bolt (B) in
place.
2.Attach bottom board (4) to left side panel (2) by inserting wood dowels (A) and cam bolts (B) into holes on
bottom board (4) and insert 2 cam locks (C) into cam lock holes on bottom board (4) and rotate clockwise to
secure cam bolts (B) in place.
3.Repeat above steps to attach right side panel (1) to cross bar (3) and bottom board (4).
4.Attach magnet (H) to cross bar (3) by inserting 2 magnet wood screws through holes on magnet (H) and
tighten into cross bar (3).
STEP 10
STEP 10
1.Screw in 4 cam bolts (B) into pre-threaded holes on top board (5).
3
H
1
C
4
2
C
B
5

STEP 11
5
A
A
C
2
1
STEP 11
1.Insert 4 wood dowels (A) into dowel holes on top of left side panel (2) and right side panel (1).
2.Attach top board (5) to left side panel (2) and right side panel (1) by inserting 4 wood dowels (A) into dowel holes on top
board (5) and inserting 4 cam bolts (B) into holes on left side panel (2) and right side panel(1).
3.Insert 2 cam locks (C) into cam lock holes on left side panel (2) and rotate clockwise to secure cam bolts (B) in place.
4.Insert 2 cam locks (C) into cam lock holes on right side panel (1) and rotate clockwise to secure cam bolts (B) in place.
STEP 12
G
STEP 12
1.Attach back board (6) to pre-assembled cabinet by inserting 14 wood screws (G) through holes on back
board (6) and tighten to cabinet.
6
90°
G

STEP 13
D
7
D
I
13
STEP 13
1.Attach door (7) to left side panel (2) by inserting 6 wood screws (D) through holes on metal hinges (E) and
tighten to door (7).
STEP 14
STEP 14
1.Insert 4 shelf holders (I) into holes on left side panel (2) and right side panel (1) making sure 4 shelf
holders (I) are at same height.
3.Put shelf (13) onto shelf holders (I).

STEP 15
STEP 15
1.Attach drawer to cabinet by inserting drawer slides with wheels into drawer slides in cabinet.
2.Adjust hinges to make door closetight as needed.

STEP 16
STEP 16
1.Attach metal bracket (P) to top board (5) by inserting 1 wood screw (R) through hole on metal bracket (P)
and tighten to top board (5).
2.Align position of metal bracket (P) assembled to cabinet to desired position on wall and a drill hole on wall.
4.Insert 1 plastic anchor (N) into hole on wall and attach another metal bracket (P) to anchor (N).
5.Insert 1 long screw (L) through metal bracket (P) and tighten to plastic anchor (N).
STEP 17
STEP 17
1.Place cabinet against wall and insert plastic lock strip (Q) through metal bracket (P) on cabinet and metal
bracket (P) on wall and fasten plastic lock trip (Q) to fix metal brackets (P) firmly together.
P
R
N
P
L
Q