RiverRidge Madison Tall Cabinet 06-108 User manual

ASSEMBLY INSTRUCTIONS
RiverRidge®Madison Tall Cabinet
ITEM #: 06-108 White
ADULT ASSEMBLY REQUIRED
This product requires assembly by an adult because of small parts. Care should be taken in
unpacking and assembling this item to keep small parts away from children.
WARNING SEE FULL WARNING ON PAGE 2
Young children can be seriously injured or killed if furniture tips over. Don’t use
this item for a TV stand or place heavy objects on top of item. Always use
angle-braces or anchors to secure furniture to the wall.

THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER SHELF OR A TOTAL OF 120
POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 20 POUNDS OR 120 POUNDS
TOTAL WEIGHT. IF OVERLOADED WITH MORE THAN 20 POUNDS PER SHELF OR 120
POUNDS TOTAL WEIGHT, SHELF MAY TIP FROM THE WALL AND CAUSE SERIOUS
INJURY OR DEATH.

PARTS LIST
NO
QTY
DESCRIPTION
1
1PC
Top Board
2
2PCS
Upper Shelf
3
1PC
Middle Connection Board
4
1PC
Lower Shelf
5
1PC
Lower Adjustable Shelf
6
1PC
Bottom Board
7
1PC
Upper Front Cross Bar
8
1PC
Lower Cross Bar
9
2PCS
Upper Side Frame
10
1PC
Lower Left Side Panel
11
1PC
Lower Right Side Panel
12
1PC
Door
13
1PC
Back Board
14
1PC
Upper Back Cross Bar

TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED)
THE USE OF POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY TOOL
NEEDED FOR SECURING TO WALL: POWER DRILL (NOT INCLUDED)
To order replacement parts at no cost to you, email [e-mail],
call 1-(844)-223-5201 or order parts online at www.riverridgehome.com
PARTS LIST
NO
PARTS
QTY
DESCRIPTION
A
24PCS
Cam Bolt
B
24PCS
Cam Lock
C
32PCS
Wood Dowel (6 x 30mm)
D
4PCS
Metal Shelf Holder
E
2PCS
Hinge
F
1PC
Handle
G
14PCS
Screw (4 x 12mm)
H
2PCS
Screw (5 x 45mm)
I
4PCS
Screw (4 x 35mm)
J
14PCS
Screw (2.5 x 10mm)
K
2PCS
Plastic Anchor

STEP 1
1. Screw 4 cam bolts (A) into pre-threaded holes on top board (1).
2. Screw 4 cam bolts (A) into pre-threaded holes on middle connection board (3).
STEP 2
1. Screw 4 cam bolts (A) into pre-threaded holes on upper side frame (9).
2. Repeat above step for another upper side frame (9).
STEP 3
1. Screw 4 cam bolts (A) into pre-threaded holes on lower left side panel (10).
2. Screw 4 cam bolts (A) into pre-threaded holes on lower right side panel (11).

STEP 4
1. Insert 8 wood dowels (C) into wood dowel holes on upper side frame (9).
2. Attach upper side frame (9) to upper front cross bar (7) and upper shelves (2) by inserting wood
dowels (C) into wood dowel holes on upper front cross bar (7), upper back cross bar (14) and
inserting cam bolts (A) into cam lock holes on upper shelves (2).
3. Insert 4 cam locks (B) into cam lock holes on upper shelves (2) then rotate clockwise to secure the
cam bolts (A) in place.
4. Repeat above steps to assemble another upper side panel (9) to upper front cross bar (7), upper
back cross bar (14) and upper shelves (2).
STEP 5
1. Attach top board (1) to upper side frames (9) by inserting cam bolts (A) into cam lock holes on
upper side frames (9).
2. Insert 4 cam locks (B) into cam lock holes on upper side frames (9), then rotate clockwise to secure
cam bolts in place.
3. Insert 4 wood dowels (C) into wood dowel holes on middle connection board (3).
4. Attach middle connection board (3) to upper side frames (9) by inserting wood dowels (C)into
wood dowel holes on upper side frames (9), then inserting 4 screws (I) through holes on middle
connection board (3) and tighten to upper side frames (9).

STEP 6
1. Insert 6 wood dowels (C) into wood dowel holes on lower left side panel (10).
2. Attach lower Left side panel (10) to lower cross bar (8), lower shelf (4) and bottom board (6) by
inserting wood dowels (C) into wood dowel holes on lower cross bar (8) and inserting cam
bolts and wood dowels into cam lock holes on lower shelf (4) and bottom board (6).
3. Insert 4 cam locks (B) into cam lock holes on lower shelf (4) and bottom board (6), then rotate
clockwise to secure cam bolts in place.
4. Repeat above steps to assemble lower right side panel (11) to lower cross bar (8), lower shelf
(4) and bottom board (6).
STEP 7
1. Attach upper section to lower section by inserting cam bolts into cam lock holes on Lower left
side panel (10) and lower right side panel (11).
2. Insert 4 cam locks (B) into cam lock holes on lower left side panel (10) and lower right side panel
(11), then rotate clockwise to secure cam bolts in place.

STEP 8
1. Attach back board (13) to cabinet by inserting 14 screws (J) through holes on back board (13),
then tighten to back of cabinet.
STEP 9
1. Attach 2 hinges (E) to door (12) by inserting 4 screws (G) through holes on hinges (E), then
tighten to door (12).
2. Attach handle (F) to door (12) by inserting 2 screws (G) through holes on handle (F), then tighten
to door (12).

STEP 10
1. Attach door (12) to cabinet by inserting 8 screws (G) through holes on hinges (E), then tighten to
lower left side panel (10).
2. Note: Tightening screw in position “a” will adjust door up or down; tightening screw in position “b”
will adjust door to or from cabinet and tightening screw in position “c” will adjust door side to side.
STEP 11
1. Place drawing with hole positions on wall in desired location and drill holes on wall.
2. Insert 2 plastic anchors (K) into holes on wall.
3. Align cabinet with holes in wall and insert 2 screws (H) through holes on cabinet, then
tighten to plastic anchors (K) in wall.
Door Adjustments

STEP 12
1. Insert 4 metal holders (D) into holes at desired positions.
2. Place lower adjustable shelf (5) onto metal holders (D).
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose
screws/parts. Take appropriate action necessary to correct hazards such as tightening
of screws and taking any damaged parts away from children.
WARNING Please make sure your item is
secured to the wall, per assembly instructions.

Enjoy your new RiverRidge® Cabinet!
Thank you for purchasing this RiverRidge® Home item. We hope you
enjoy it and consider purchasing other RiverRidge® items.
To order replacement parts at no cost to you, email [e-mail],
call 1-(844)-223-5201 or order parts online at www.riverridgehome.com
RiverRidge® is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016