Sauder Summer Home Pantry 401867 User manual

NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-18
Français pg 19-21
Español pg 22-24
Lot # 373004 05/20/15
Purchased: __________________
Be sure to give us a ring before
making any returns. 1-800-523-3987
Pantry
Summer Home Collection | Model 401867
Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-523-3987.
Share your journey!
sauder.com
You'll love what we
have in storage.

Table of Contents Assembly Tools Required
3
4
5-18
19-21
22-24
25-26
27
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
401867 www.sauder.com/servicesPage 2

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
A RIGHT END (1)
B LEFT END (1)
C TOP (1)
D BOTTOM (1)
E BACK (1)
F DOOR (1)
G ADJUSTABLE SHELF (3)
H SKIRT (1)
I RIGHT LEG (1)
J LEFT LEG (1)
K BALLAST (1)
L BRACE (1)
M FRONT MOLDING (1)
N RIGHT MOLDINIG (1)
O LEFT MOLDING (1)
P TOP MOLDING (1)
401867www.sauder.com/services Page 3
A
B
C
D
E
F
G
H
I
J
K
L
M
N
OP
G
G

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
401867 www.sauder.com/servicesPage 4
HIDDEN CAM - 12
Q2 CAM DOWEL - 12 R2 ANGLE BRACKET - 8
SMAGNETIC
CATCH- 1
U
STRIKE PLATE - 1
VHINGE - 2 WBACKPLATE - 1 XMOLDING
CONNECTOR - 2
Z
AA TACK GLIDE - 2 METAL PIN - 12 BB RUBBER SLEEVE - 12 CC CAM COVER - 6 LL
BROWN 1-1/2" FLAT HEAD SCREW - 8
FF SILVER 1-1/4" MACHINE SCREW - 1 GG
BLACK 1-1/8" PAN HEAD SCREW - 1
HH BLACK 9/16" LARGE HEAD SCREW - 24 II
BLACK 1/2" FLAT HEAD SCREW - 1
JJ NAIL - 32 KK
KNOB - 1
Y
CATCH
BRACKET - 1
T
BLACK 1-7/8" PAN HEAD SCREW - 4
DD BLACK 1-1/2" PAN HEAD SCREW - 2
49S

Step 1 Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å Assemble your unit on a carpeted floor or on the empty carton
to avoid scratching your unit or the floor.
å Push twelve HIDDEN CAMS (Q2) into the RIGHT END (A), LEFT
END (B), and BOTTOM (D). Then, insert a CAM DOWEL (R2)
into each HIDDEN CAM.
401867www.sauder.com/services Page 5
Arrow
Q2
R2
Arrow
Q2
R2
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Arrow
Do not tighten the HIDDEN CAMS in this step.
(12 used)
A
B
D

Step 2
å Fasten the ENDS (A and B) to the BOTTOM (D). Tighten
four HIDDEN CAMS.
401867 www.sauder.com/servicesPage 6
Start Tighten
Arrow
Minimum
190 degrees
Caution
Risk of damage or
injury. HIDDEN CAMS
must be completely
tightened. HIDDEN
CAMS that are not
completely tightened
may loosen, and parts
may separate. To
completely tighten:
Arrow
Maximum
210 degrees
A
B
D
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
Surface
with
HIDDEN
CAMS
Surface with HIDDEN CAMS
Surface without HIDDEN CAMS
These holes must be here.

å Tap two MOLDING CONNECTORS (Z) into the notches in
the MOLDINGS (M, N, and O).
å Fasten the MOLDINGS (M, N, and O) to the ENDS (A and B).
Use four BLACK 1-7/8" PAN HEAD SCREWS (DD).
Step 3
401867www.sauder.com/services Page 7
BLACK 1-7/8" PAN HEAD SCREW
(4 used in this step)
DD
A
B
M
N
O
ZZ
Flat end
Flat end
M
N
O
Unfinished surface
Unfinished surface
Use your hammer to tap the
MOLDING CONNECTORS (Z) into
the notches in the MOLDINGS.

Step 4
å Fasten the TOP (C) to the MOLDINGS (N and O). Use four
BROWN 1-1/2" FLAT HEAD SCREWS (FF).
å Fasten two ANGLE BRACKETS (S) to the FRONT MOLDING (M).
Use two BLACK 1-1/2" PAN HEAD SCREWS (49S) through the
BRACKETS, through the FRONT MOLDING, and into the TOP.
401867 www.sauder.com/servicesPage 8
BROWN 1-1/2" FLAT HEAD SCREW
(4 used for the TOP)
FF
S
C
M
N
O
Finished edge
Surface
with holes
BLACK 1-1/2" PAN HEAD SCREW
(2 used for the ANGLE BRACKETS)
49S

å Fasten two HINGES (W) to the LEFT LEG (J). Use four
BLACK 9/16" LARGE HEAD SCREWS (II).
Step 5
401867www.sauder.com/services Page 9
W
J
Surface with holes
BLACK 9/16" LARGE HEAD SCREW
(4 used in this step)
II
Angled edge

Step 6
å Fasten the LEGS (I and J) to the ENDS (A and B). Tighten
eight HIDDEN CAMS.
å Tap two TACK GLIDES (AA) into the LEGS (I and J).
401867 www.sauder.com/servicesPage 10
Arrow
Minimum
190 degrees
Maximum
210 degrees
A
B
I
J
AA
These surfaces
should be even.
Angled edge