Great Little Trading L4597 User manual

1
Growing Activity Table
A few important pointers before you start:
• It might be worth checking on our website that there are no updates
or revisions to these instructions (if we have had helpful feedback from
other customers we pass it on via the product web page). Simply check
the date and version number on the front of this leaet against that of
any site updates.
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the
tools you need at the beginning of the instructions.
•It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
L4597
21/12/2018
V1
easy - medium - hard
Assembly Difculty
one-person job
Thank you for shopping with GLTC, we hope you enjoy having
this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail through
the whole process. But if it all feels a bit too much like hard work, then
we do have an assembly company we can recommend: the Flatpack
Construction Company offers a nationwide service and can be
contacted on 0843 289 4951 or www.atpackconstruction.co.uk.
Good luck!

2
Safety Warnings:
• Adult assembly required.
• Unassembled product contains small parts which may present a
choking hazard.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
•Check all xtures and ttings regularly and tighten as necessary.
• Assemble and use on a at and level surface.
• To avoid possible injury - Do not allow children to climb on the
product.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
Please retain these instructions for future reference.
Further Information:
•This product is designed to be used with paper roll 45cmW x 7.5cmD
available at gltc.co.uk.
• For other sources of paper please note the diameter of the wooden
paper pole is 25mm.
Customer Service:
•If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean only.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
•Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you.

3
Component Check List
A B
Component Check List
#1 #2
#3 #4
You will need (not supplied)
C D
#5
Philips Head Screwdriver
EF
G H
I J
x1 LH Short Leg x1 Rail Support Panel
x1 LH Short Leg x1 Rail Support Panel
x2 RH Short Legs x1 Table Top
x1 Wooden Paper Pole x1 LH Long Leg
x1 LH Long Leg x2 RH Long Legs
x2 Wooden Dowels x2 Cross Head Bolts 25mmL
x8 Cross head Bolts 45mm x8 Split Washers
x8 Flat Washers x1 Ball Ended Screw
#6
You will need (not supplied)
Paper Roll 45cmW x 7.5cmD
available at gltc.co.uk

4
STEP 2:
Attach the table legs to the table top (F) as shown with x8 bolts (#3).
Thread x1 split washer (#4) then x1 at washer (#5) to each bolt as shown before
securing. Make sure all bolts are fully tight.
Hardware for Step 2:
Hardware for Step 1:
STEP 1:
In this step we show the attachment of the shorter legs A and C, select legs H and I if
you would like to build with the longer legs.
Insert x1 wooden dowel (#1) into each leg and t the rail support panel (B & D) to
the correct leg and secure with x1 bolt (#2).
x8 #3 Bolts 45mmL
A
B
#1
#2
x2 #1 Wooden Dowel
D
#2
#1
A
C
E
F
E
#3
#4
x8 #5 Flat Washers
/J
/J
/I
/H
#5
Note
This table is designed to grow with your child. There are two sizes of wooden
legs (x4) included with this product. Before constructing, decide at which height
you would like the table and select the appropriate legs.
/H
C/I
x2 #2 Cross Head Bolts
25mmL
x8 #4 Split Washers

5Copyright© 2019 G.L.T.C. Ltd.All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
STEP 3:
Please note: If purchased a paper roll from GLTC, place this on the wooden pole
(G).
Slot in the wooden rail ensuring that the end with the hardware hole is at the end
with the corresponding hardware hole. Secure the wooden pole in place with the
ball ended screw (#6).
Your item is now ready to use.
#6
G
Hardware for Step 3:
x1 #6 Ball ended Screw
Please note: Ensure that the remaining wooden legs (x4) and this instruction
pack are kept securely for future reference.When you want to change the legs,
refer back to step 1 of this instruction pack for guidance.You will not require any
further hardware to change the legs.
F