Robot Coupe Mini MP 160 V.V. User manual

Robot Coupe U.S.A., Inc.,
264 South Perkins, Ridgeland, MS 39157
Phone : [phone] • 601/898-8411
email: [email protected] - website: www.robot-coupe.com
Mini MP 160 V.V.
Mini MP 190 V.V.
Mini MP 240 V.V.
Mini MP 190 Combi
Mini MP 240 Combi
New
Register
your product
on line
20/04/2021

We reserve the right to alter at any time without notice the technical specifications of this appliance.
None of the information contained in this document is of a contractual nature. Modifications may be made at any time.
© All rights reserved for all countries by: ROBOT-COUPE s.n.c.
www.robotcoupeusa.com
Register your product online

WARNING: In order to limit accidents such as electric shocks or personal injury, and in order to limit material damage due to misuse of the
appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will help you get to know your
appliance and enable you to use the equipment correctly. Please read these instructions in their entirety and make sure that anyone else who
may use the appliance also reads them beforehand. Our equipment is designed for professional use and must not be used by children under
any circumstances.
UNPACKING
• Carefully remove the equipment from the packaging and
take out all the boxes or packets containing attachments
or specific items.
• WARNING - some of the tools are very sharp e.g.
blades, discs... etc..
• Store manuals, tools and spare parts in a safe place
available to the users of the machine
INSTALLATION
•This machine must be operated on a clean sturdycounter
or table. Keep the area around and under themachine
clear to allow air circulation. Otherwise themotor can
overheat. All four feet must be in place.
CONNECTION
• Always check that your power supply corresponds to
that indicated on the identification plate on the motor unit
and that it can withstand the amperage.
• The unit must always be connected to a grounded outlet
with Ground Fault Circut Interrupter (GFCI) protection
device.
• Always check that the motor shaft rotates in counter
clockwise direction before the blades are installed.
HANDLING
• Always take care when handling the blades, asthey are
extremely sharp.
• Wear cut-proof gloves when handling the blades.
USE
• The machine must not be modified in any way from its
original configuration.
• Never tamper with, or defeat the purpose of the
locking and safety systems.
• Do not put nonfood objects in the bowl.
• Do not leave the machine running unattended.
• The machine must be operated and stored in a location
not subject to water drips or spray or explosive vapors.
• Should the machine malfunction or should any part be
damaged, it must not be operated until it is repaired by
a qualified technician using only genuine Robot Coupe
repair parts.
• Failure to follow these operating instructions or
attempts to operate the machine outside its design limits
may create a hazardous condition that could damage
the machine and/or injure users. Special attention
should be given to the use of the operation controls and
safety features.
• The unit is equipped with a thermal overload circuit-
breaker. If the unit overheats due to an overload
condition, it will automatically shut off. After cooling a
few minutes the thermal overload circuit-breaker may
be reset. Press the reset button located on the bottom
left front of the unit.
• Operating times of 5 minutes or longer can cause
processed food to increase to temperatures above
125° F (52° C).
• Maximum fill level is ⅔ full, less if the product is very
dense or sticky.
CLEANING
• As a precaution, always unplug your appliance before
cleaning it.
• Always clean the appliance and its attachments at the
end of each cycle.
• Never immerse the motor base in water.
• For parts made from aluminum, use metal safe
detergents intended for aluminum.
• Caustic detergents used in automatic dishwashers
quickly degrade plastic parts. Hand wash plastic parts if
possible.
• Robot Coupe can in no way be held responsible for
the user’s failure to follow the basic rules of cleaning and
hygiene.
MAINTENANCE
• Do not open the motor housing. There are no user
serviceable components inside the electrical housing.
Refer control component repairs to qualified technicians.
• Replace seals every 3 to 6 months. Lubricate with food
safe grease.
• It is particularly important to maintain and check the
attachments since certain ingredients contain corrosive
agents, e.g. citric acid.
• Never operate the appliance if the power cord or
plug has been damaged or if the appliance fails to work
properly or has been damaged in any way.
• If the machine malfunctions in any way discard any
food being processed and refer service to qualified
maintenance technicians.
IMPORTANT WARNING WARNING
KEEP THESE INSTRUCTIONS IN A SAFE PLACE
20/04/2021

3
20/04/2021
ENGLISH
CONTENTS
WARRANTY
IMPORTANT WARNING
•Unpacking
•Installation
•Connection
•Handling
•Use
•Cleaning
•Maintenance
INTRODUCTION
SWITCHING ON THE APPLIANCE
• Advice on electrical connections
OPERATING THE MINI IMMERSION BLENDER
•Operation
•Variable-speed operation
WORKING POSITION
ASSEMBLY & DISASSEMBLY
• Mixer assembly
• Aéromix tool
• Whisk function
CLEANING
•Motor housing
•Shaft and bell
• Blade and Aéromix tool
• Whisk
• Aluminum
•Plastic
MAINTENANCE
•Blade
• Whisk
•Shaft seal
TROUBLE SHOOTING
SERVICE
TECHNICAL DATA
•Electrical diagram

420/04/2021
THE FOLLOWING ARE NOT COVERED
UNDER WARRANTY:
1 - Damage caused by abuse, misuse, dropping, or
other similar incidental damage caused by or as result
of failure to follow installation, assembly, operating,
cleaning, user maintenance or storage instructions,
including failure to verify and correct rotation of three
phase motors.
2 - Labor to sharpen and/or parts to replace knife
assemblies or blades which have become dull, chipped,
or worn due to normal use.
3 - Material or labor to renew or repair scratched,
stained, chipped, dented, or discolored surfaces, blades,
knives, attachments, or accessories.
4 - Transportation charges to or from an authorized
service agency for repairs of a machine designated as
“CARRY IN SERVICE” (Table Top Models).
5 - Labor charges to install or test attachments or
accessories (i.e. bowls, cutting plates, blades, attachments)
which are replaced for any reason.
6 - Charges to change Direction-of-Rotation of Three
Phase electric motors (INSTALLER IS RESPONSIBLE). All
Robot Coupe products must operate counter-clock-wise.
7 - SHIPPING DAMAGE IS NOT COVERED BY
WARRANTY. Visible and hidden damages are the
responsibility or the freight carrier. The consignee must
file a damage claim promptly against the carrier, or
upon discovery in the case of hidden damage.
8 - Any ROBOT COUPE COMMERCIAL PRODUCT used
in an Industrial application.
Commercial equipment use is defined as but not limited
to the preparation of food substance within the confines
of a restaurant/facility, that is sold and consumed within
said restaurant/facility.
Industrial equipment use is defined as but not limited
to the manufacturing of food substance in large batch
quantities. The processed food is then packaged and
sold off site and or to a distributer for resale off site.
KEEP ALL ORIGINAL CONTAINERS AND PACKING
MATERIALS FOR CARRIER INSPECTION
All Robot Coupe equipment should be operated in
an ambient room temperature of 60 degrees (F) or
higher.
Robot Coupe U.S.A., Inc., Robot Coupe S.A., or
any of their affiliates, distributors, officers, directors,
agents, employees or insurers will not be obligated for
consequential or other damages, losses, or expenses in
connection with or by reason of the use of or the inability
to use the machine for any purpose.
THIS WARRANTY IS GIVEN EXPRESSLY AND IN
LIEU OF ALL OTHER WARRANTIES EXPRESSED
OR IMPLIED, FOR MERCHANTABILITY AND FOR
FITNESS TOWARD A PARTICULAR PURPOSE AND
CONSTITUTES THE ONLY WARRANTY MADE BY
ROBOT COUPE, U.S.A., Inc.
YOUR NEW ROBOT COUPE COMMERCIAL
PRODUCT IS WARRANTED TO THE
ORIGINAL PURCHASER FOR A PERIOD OF
ONE YEAR FROM THE DATE OF PURCHASE.
This LIMITED COMMERCIAL WARRANTY
is against defects in the material and / or
workmanship, and includes labor for
replacement of defective parts, provided
repairs are performed by an authorized
service agency (see attached list). The
CUSTOMER must inform the Service Agency
of the possibility of warranty coverage and
provide a copy of the dated sales or delivery
receipt BEFORE WARRANTY REPAIRS ARE
BEGUN. All parts or accessories replaced
under warranty must be returned to the
Service Agency. The warranty for work
done or parts replaced under warranty
expires at the end of the original warranty
period.
Replacement parts and accessories are
warranted for ninety (90) days from
the date of purchase when purchased
separately and will be verified by dated
sales receipt OR packing slip which list that
item.
All Robot Coupe Products are considered
commercial use only.
ROBOT COUPE U.S.A., INC. ONE YEAR LIMITED COMMERCIAL WARRANTY

5
20/04/2021
ENGLISH
WARNING: In order to limit accidents such as electric shocks or personal injury, and in order to limit material damage due to misuse of the
appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will help you get to know your
appliance and enable you to use the equipment correctly. Please read these instructions in their entirety and make sure that anyone else who
may use the appliance also reads them beforehand. Our equipment is designed for professional use and must not be used by children under
any circumstances.
UNPACKING
• Carefully remove the equipment from the packaging and
take out all the boxes or packets containing attachments
or specific items.
• WARNING - some of the tools are very sharp e.g.
blades, discs... etc..
• Store manuals, tools and spare parts in a safe place
available to the users of the machine
INSTALLATION
•This machine must be operated on a clean sturdy counter
or table. Keep the area around and under the machine
clear to allow air circulation. Otherwise the motor can
overheat. All four feet must be in place.
CONNECTION
• Always check that your power supply corresponds to
that indicated on the identification plate on the motor unit
and that it can withstand the amperage.
• The unit must always be connected to a grounded outlet
with Ground Fault Circut Interrupter (GFCI) protection
device.
• Always check that the motor shaft rotates in counter
clockwise direction before the blades are installed.
HANDLING
• Always take care when handling the blades, asthey are
extremely sharp.
• Wear cut-proof gloves when handling the blades.
USE
• The machine must not be modified in any way from its
original configuration.
• Never tamper with, or defeat the purpose of the
locking and safety systems.
• Do not put nonfood objects in the bowl.
• Do not leave the machine running unattended.
• The machine must be operated and stored in a location
not subject to water drips or spray or explosive vapors.
• Should the machine malfunction or should any part be
damaged, it must not be operated until it is repaired by
a qualified technician using only genuine Robot Coupe
repair parts.
• Failure to follow these operating instructions or
attempts to operate the machine outside its design limits
may create a hazardous condition that could damage
the machine and/or injure users. Special attention
should be given to the use of the operation controls and
safety features.
• The unit is equipped with a thermal overload circuit-
breaker. If the unit overheats due to an overload
condition, it will automatically shut off. After cooling a
few minutes the thermal overload circuit-breaker may
be reset. Press the reset button located on the bottom
left front of the unit.
• Operating times of 5 minutes or longer can cause
processed food to increase to temperatures above
125° F (52° C).
• Maximum fill level is ⅔ full, less if the product is very
dense or sticky.
CLEANING
• As a precaution, always unplug your appliance before
cleaning it.
• Always clean the appliance and its attachments at the
end of each cycle.
• Never immerse the motor base in water.
• For parts made from aluminum, use metal safe
detergents intended for aluminum.
• Caustic detergents used in automatic dishwashers
quickly degrade plastic parts. Hand wash plastic parts if
possible.
• Robot Coupe can in no way be held responsible for
the user’s failure to follow the basic rules of cleaning and
hygiene.
MAINTENANCE
• Do not open the motor housing. There are no user
serviceable components inside the electrical housing.
Refer control component repairs to qualified technicians.
• Replace seals every 3 to 6 months. Lubricate with food
safe grease.
• It is particularly important to maintain and check the
attachments since certain ingredients contain corrosive
agents, e.g. citric acid.
• Never operate the appliance if the power cord or
plug has been damaged or if the appliance fails to work
properly or has been damaged in any way.
• If the machine malfunctions in any way discard any
food being processed and refer service to qualified
maintenance technicians.
IMPORTANT WARNING WARNING
KEEP THESE INSTRUCTIONS IN A SAFE PLACE

620/04/2021
1. Plug your appliance
into the power outlet,
making sure you do
not press the button
(BC).
2. Insert the foot into
the preparation.
3. Press the control
button (BC), and the
Immersion Blender
will start up.
4. To stop the
Immersion Blender,
release the control
button (BC).
• VARIABLE-SPEED OPERATION
Follow steps 1 to 4 above, then:
5. Change the speed of the motor by turning the
variable speed button (MV) towards the maximum
or minimum as required.
Whisk function (Mini MP 190 Combi and Mini MP
240 Combi): speed between 350 and 1,560 rpm.
Mixer function (Mini MP 160 V.V. – 190 V.V. –
240 V.V. and Mini MP 190 Combi – 240 Combi):
speed between 2,000 and 12,500 rpm.
It is advisable to start at a low speed when using the
whisk.
With the self-regulating speed system, once you
have selected a speed, it will remain constant, even
if the consistency of your mixture changes.
INTRODUCTION
The new Mini MP 160 V.V., Mini MP 190 V.V.,
Mini MP 240 V.V., Mini MP 190 Combi and Mini
MP 240 Combi models are the latest additions to
Robot-Coupe’s range of Immersion Blender. They
have been specially designed for processing smaller
quantities. They are fitted with a foot, blades and an
emulsifying disc which can be entirely dismantled,
and their shaft measure 6 19/64 inches, 7 31/64
inches and 9 24/64 inches long respectively.
These Immersion Blender are tools which are totally
adapted to the needs of professionals. They will
enable you to make soups, vegetables purées and
cereal preparations with little effort.
The whisk attachment is ideal for making pancake
batter, mayonnaise, beaten egg whites, chocolate
mousse, butter sauces, whipped cream or smooth
fromage frais.
The whisk is composed with a metallic gear box
even more resistant when processing pan cakes or
mashed potatoes.
The variable-speed function will enable you to
adjust the speed to suit each preparation and to start
the processing at a lower speed in order to reduce
splashing.
Each Immersion Blender is supplied with a wall
support for easy storage.
The simple design of these appliances allows the
assembly and disassembly of the moving parts, to
ease maintenance and cleaning.
These instructions contain important information that
will enable you to extract the greatest return on your
investment.
We therefore strongly advise you to read these
instructions carefully before using the appliance.
SWITCHING ON
THE APPLIANCE
• ADVICE ON ELECTRICAL CONNECTIONS
The appliance should be plugged into a Ground
Fault Interrupt type outlet.
Make sure that the voltage of your power supply
matches that shown on the identification plate of
your appliance.
OPERATING THE MINI
IMMERSION BLENDER
• OPERATION
The Immersion Blender is equipped with electrical
current and temperature overload protection. If the
Immersion Blender stops unexpectedly you may
try to restart it by following steps 3-5 below. If the
Immersion Blender does not restart, allow it to cool
for a period of up to 30 minutes and the temperature
overload will automatically reset. You should then be
able to restart following steps 3-5 below.

7
20/04/2021
ENGLISH
in order to ensure that the mixture is completely
homogeneous. Avoid touching the whisk to the side
of the bowl. For maximum efficiency, at least ⅕of
the whisk length should be immersed. Always start
processing at low speed.
ASSEMBLY &
DISASSEMBLY
• MIXER ASSEMBLY
Attaching the shaft to the motor unit.
- Unplug the Immersion Blender.
- Note that each end of the shaft has a threaded
plastic piece. One is longer than the other and
doesn’t have a rubber "O" ring. Insert this
longer plastic end Ainto the motor housing B,
and turn the shaft in the direction of the arrow
until it is tight.
WORKING POSITION
For a more ergonomic
approach, we recommend
that you hold the handle of
the appliance in one hand
and the container with the
other. It is a good idea to tilt
the Immersion Blender slight-
ly, making sure that the bell
does not touch the bottom of
the container.
Always make sure that the bell is sufficiently immersed
to avoid splashing and that the air vents of the motor
unit do not come into contact with any liquid.
For optimum efficiency, ⅔of the shaft should be
immersed in the preparation.
Do not rest the bell against the bowl.
• WHISK FUNCTION
We recommend that you
hold the Immersion Blender
by the handle and the bot-
tom of the motor unit.
You can also hold the
appliance by the handle with
one hand, leaving the other
hand free to hold the bowl,
if necessary.
While processing we
recommend that you move
the whisk around in the bowl,
Removing the shaft from the motor unit
- Unplug the Immersion Blender.
- Turn the shaft counterclockwise until it is removed.
Attaching the bell to the tube
- Unplug the Immersion Blender.
- Insert the threaded shaft Binto the housing Aof
the bell. Turn the bell in the direction of the arrow
(see drawing) until it is tight.
Removing the bell from the tube
- Unplug the Immersion Blender.
- Turn the bell in the direction of the arrow (see
drawing below) to detach it from the tube.
TURN TO ATTACH BELL
TURN TO REMOVE BELL
Mini MP 190 V.V.
Mini MP 240 V.V.
Mini MP 190 Combi
Mini MP 240 Combi
Mini MP 190 V.V.
Mini MP 240 V.V.
Mini MP 190 Combi
Mini MP 240 Combi
Mini MP 160 V.V.
Mini MP 190 V.V.
Mini MP 240 V.V.
Mini MP 190 Combi
Mini MP 240 Combi

820/04/2021
Removing the blade
-Unplug the Immersion Blender then, hold the
blades with the provided blade-locking tool.
- Using the blade-locking tool, unscrew the
drive coupling then remove the blade for easy
cleaning.
Mini MP 190 V.V.
Mini MP 190 Combi
Mini MP 240 V.V.
Mini MP 240 Combi
BLADE LOCKING
BLADES WITH WATERTIGHT SEALS
BELL
DRIVE COUPLING
BLADE REMOVAL
REMOVAL DIRECTION
BLADE REMOVAL
FOOT
BLADE
BLADE LOCKING
Mini MP 160 V.V.
BLADE LOCKING
BELL
DRIVE COUPLING
BLADE REMOVAL
REMOVAL DIRECTION
AEROMIX TOOL
BLADE REMOVAL
FOOT
BLADE LOCKING
AEROMIX TOOL
Attaching the Aeromix tool
- To safely attach the Aeromix tool, insert it in the
bell, then fasten it in place with the locking tool.
Detaching the Aeromix tool
- To detach the Aeromix tool, simply follow the
instructions for detaching the blade.
The foot, blade, Aeromix tool (patented system
exclusive to Robot-Coupe) and whisk can all be
removed for easy aftercare and cleaning, ensuring
impeccable food safety .
Mini MP 190 V.V.
Mini MP 190 Combi
Mini MP 240 V.V.
Mini MP 240 Combi
Mini MP 160 V.V.
• AEROMIX TOOL
Do not:
- Use the Aeromix tool to blend or grind foodstuffs.
- Totally immerse the tool in the liquid if you want
to mix air into a sauce (see drawing).
The Aeromix emulsifying tool is recommended
solely for:
- Making light and airy preparations such as
mayonnaise, whisked egg whites, whipped cream
and emulsified sauces
- Processing small portions in small containers.
We recommend running the Aeromix tool at
minimum speed.
• WHISK FUNCTION
(Mini MP 190 Combi and Mini MP 240 Combi)
Attaching the gear box to the motor unit.
- Check that the machine is not plugged in.
- Insert the threaded part into the motor unit.
- Turn the gear box in the direction of the arrow (see
figure) until it is locked into place moderately tightly.

9
20/04/2021
ENGLISH
Removing the casing
- Check that the machine is not plugged in.
- Turn the gear box in the opposite direction to that
used when attaching it.
Fitting the whisks into the gear box
- Grasp the holder in one hand.
- With the other hand, take the first whisk and insert
the shaft Ainto the bore B of the gear box drive
shaft. Make sure the drive lugs D are properly
aligned with the notches.
- As you push the whisk into the gear box drive shaft
C, rotate it slightly in order to slot the drive lugs into
the notches E of the drive shaft C, thereby locking
the whisk into place inside the shaft.
- To check that the whisk is properly fixed inside the
shaft C, gently tug the metal wires.
- Repeat this procedure with the second whisk. If you
cannot push it in properly, remove it, rotate it 90°
and start again.
WARNING
Never immerse motor housing and/or handle
in liquid! The housing contains the electrical
components and is not sealed against liquid.
Contact with liquid can cause damage to the
blender and serious injury to the operator.
WARNING
Always unplug the Immersion Blender before
cleaning it!
Always dilute bleach according to the
instructions on the label.
Never run the Immersion Blender through a
dishwasher!
The type and concentration of the sanitation
agent must comply with 21 CFR 178.1010
regulations.
Clean according to local health department
regulations.
CLEANING
• MOTOR HOUSING
The Immersion Blender must be clean through all
stages of production. Clean between each job using
a detergent or disinfectant. Dilute the detergent/
disinfectant following the instructions normally specified
on it’s packaging container. Use a cloth lightly
dampened (not dripping) with the cleaning solution.
Do not allow liquid to come into contact with the
electrical components contained within the housing.
Be careful when cleaning around vents do not allow
liquid to drip or seep into the housing.
Use a cloth lightly dampened with water to remove
detergent/disinfectant then dry using a clean cloth.
After using the Immersion Blender in a hot mixture,
cool the bottom of the tube in cold water before
disassembling the bell from the shaft.
Clean immediately after use to prevent product from
sticking to surfaces.
Removing the whisks from the gear box
Pull the whisk Ain
direction to the arrow,
gripping the ejector in
one hand and the holder
Bin the other.
• SHAFT AND BELL
There are two ways to proceed:
Simple cleaning procedure between mixing
batches
Submerge the shaft and bell in water and run
for a few seconds to clean. Unplug the power
cord.
Complete cleaning procedure between meal prep
times and at the end of the work day.
- Unplug the Immersion Blender and rinse the bell
under a water tap.
- Remove the bell from the shaft, then remove the
blade using the included tool kit (wear cutting
gloves)! Be careful to avoid damaging the
surface of the blade shaft and the watertight
seals.
- Always dilute the detergent/disinfectant
(see above). Thoroughly dry all parts before
reassembling.

10 20/04/2021
• BLADE AND AEROMIX TOOL
The blade and the Aeromix tool can be detached to
allow for thorough cleaning of the appliance.
Make sure you always wipe the blades and the
Aeromix emulsifying tool dry after cleaning, to
avoid oxidation.
The quality of the end product depends above all
on the state of the emulsifying tool and its degree
of wear. We therefore recommend replacing it from
time to time, in order to ensure optimum quality
every time.
• WHISK
The whisks can be cleaned either by hand or in a
dishwasher.
Never immerse the gear box in water or in a
dishwasher.
Clean it with a slightly damp cloth or sponge.
• ALUMINUM
Use soft-metal-safe cleaning agents!
• PLASTIC
Be careful, many cleaning agents are corrosive and
are not safe for use on plastics !
Do not use strong alkaline detergent (having a high
concentration of soda or ammonia).
MAINTENANCE
• BLADE
Over time the blades will become worn and will
need to be replaced. The washer and seals should
also be replaced at this time.
A blade service kit is available.
You are also advised to change, at the same time,
the washer and the watertight seals.
• WHISK
The success of your preparation will depend
essentially on the state of the metal wires and
their amount of wear and tear. They should
therefore be replaced from time to time in
order to ensure optimum quality of the finished
product.
• SHAFT SEAL
In order to maintain a watertight seal between the
shaft and bell, inspect the seal for wear and replace
it if necessary.
TROUBLE SHOOTING
THE IMMERSION BLENDER DOES NOT START.
- Did you follow the previous operating instructions?
See the section on "OPERATING THE Immersion
Blender".
- Pull the plug and try another outlet.
- Check outlet for current (breaker or fuse).
- Call local Robot Coupe authorized service agency.
THE IMMERSION BLENDER STOPS DURING
(WHILE) PROCESSING.
See the section on "OPERATING THE Immersion
Blender". The first paragraph describes the
overload protection. It may be necessary to allow
the machine to cool for up to 30 minutes before
restarting.
If you cannot locate the cause of the problem
- Release the control button (BC).
- Unplug the Immersion Blender.
- Are the blades free to rotate in the bell ?
- Is the drive shaft free to rotate ?
To check this, unplug the Immersion Blender,
remove the bell and test the rotation of the end of
the drive shaft manually.
Check the condition of the plug and the power cord.
THE IMMERSION BLENDER STARTS TO SMELL
HOT OR SMOKE.
Turn the Immersion Blender off and unplug it.
Call your local authorized service agency.

11
20/04/2021
ENGLISH
SERVICE
See warranty first then;
Should your unit require service, check with your
distributor to see where local service is available.
If not or if you wish your unit to be serviced at the
factory, call for return instructions and ship the unit
prepaid to our factory address.
Robot Coupe U.S.A., Inc.,
Service Department
264 South Perkins
Ridgeland, MS 39157
Phone : [phone]
For service in Canada contact the Robot-Coupe
USA factory for repair instructions.
WARNING
THE BLADES ARE SHARP! It is recommended
that cutting gloves be worn when handling the
blades. Handle and store the blades with safety
in mind.
Never try to override or defeat the purpose of
the safety mechanisms!
Never put anything (utensils etc.) but food
material near the blades on the Immersion
Blender!
Never overload the Immersion Blender!
Never turn the Immersion Blender on, unless
the bell is completely immersed in the product.
Always unplug the Immersion Blender before
doing any cleaning or maintenance!
Unplug the Immersion Blender whenever it is
not being used.
Plug the Immersion Blender only into a GFI type
outlet.
Never use extension cords.

33
20/04/2021
TECHNICAL DATA

35
20/04/2021

Réf.: 450 715a - 20/04/2021 - USA
Robot Coupe U.S.A., Inc.,
Phone: [phone] • 601/898-8411
264 South Perkins St., Ridgeland, MS 39157
e-mail: [email protected]
website: www.robot-coupe.com